Electrostatic Stimulation of Fabric Filtration

The concept of electrostatic stimulation of fabric filtration (ESFF) has been investigated at pilot scale. The pilot unit consisted of a conventional baghouse in parallel with an ESFF baghouse, allowing direct comparison. All results reported in this paper are for pulse-cleaned bags in which the electric field was maintained parallel to the fabric surface. The performance of the ESFF baghouse has been superior to the parallel conventional baghouse by several measures. The ESFF baghouse demonstrated: (1) a reduced rate of pressure drop increase during a filtration cycle, (2) lower residual pressure drop, (3) stable operation at higher face velocities, and (4) improved particle removal efficiency. These benefits can be obtained with only minor modifications to conventional pulse-jet hardware and at low electrical power consumption. The indicated ability to operate at increased face velocities with only modest expenditure for electrical hardware leads to very favorable economic projections.     

Atmospheric Factors Influencing Daily Sulfate Concentrations in Chicago Air

Abstract

Confidence interval construction for central tendency is a problem of practical consequence for those who must analyze air contaminant data. Determination of compliance with relevant ambient air quality criteria and assessment of associated health risks depend upon quantifying the uncertainty of estimated mean pollutant concentrations. The bootstrap is a resampling technique that has been steadily gaining popularity and acceptance during the past several years. A potentially powerful application of the bootstrap is the construction of confidence intervals for any parameter of any underlying distribution. Properties of bootstrap confidence intervals were determined for samples generated from lognormal, gamma, and Weibull distributions. Bootstrap t intervals, while having smaller coverage errors than Student's t or other bootstrap methods, under-cover for small samples from skewed distributions. Therefore, we caution against using the bootstrap to construct confidence intervals for the mean without first considering the effects of sample size and skew. When sample sizes are small, one might consider using the median as an estimate of central tendency. Confidence intervals for the median are easy to construct and do not under-cover. Data collected by the Northeast States for Coordinated Air Use Management (NESCAUM) are used to illustrate application of the methods discussed.     

A Comparison of Mass,Lead, Sulfate,and Nitrate Concentrations in a Field Study Using Dichotomous,Size-Selective,and Standard Hi-Vol Samplers

Air monitoring In the San Francisco Bay Area was carried out to measure outdoor community air concentrations of poly cyclic aromatic hydrocarbons (PAH) and mutagenlc activity (mutagenlclty) In participate organic matter (POM). Monitoring began In 1979 and Is currently conducted at six stations. PAH and mutagenlclty tests were performed on organic extracts prepared from high volume (hl-vol) filters composited every four months, by meteorological season. PAH were determined by high pressure liquid chromatography (HPLC) with fluorescence and ultraviolet detection. Mutagenlclty was measured In the Ames Salmonella bloas-say using strain TA98 with and without metabolic activation. The nine-year mean concentration of benzo(a)pyrene (BaP) was 0.4 ng/m³. The mutagenlcfty of this amount of BaP accounted for only about 0.2% of the observed mutagenicity In POM and other measured PAH accounted for even less. Concentrations of PAH and mutagenlclty were three to nine times higher during the winter than during other seasons. Year-to-year wintertime trends In several PAH were also seen. Early In the 1980s, winter concentrations of BaP and benzo (g,h,i)perylene Increased. However since the mld-1980’s, their concentrations have fallen. The decrease In PAH concentrations may be the result of an Increasing proportion of vehicles with relatively low organic emissions. In contrast to PAH, mutagenlcfty did not show significant year-to-year time trends.     

Formaldehyde Release from Simulated Wall Panels Insulated with Urea-Formaldehyde Foam Insulation

An important potential source of formaldehyde in the home is ureaformaldehyde foam insulation (UFFI). This study measures the long-term release of formaldehyde through the interior wall of test panels foamed with commercial urea-formaldehyde insulation. The measurements, made approximately 16 mo after initial foaming, were conducted under both static and dynamic air conditions with air flow selected to simulate a typical air exchange found in houses. Estimated room concentrations based on a simple model of uniform mixing within a room and measured emission rates are presented. Measurements of formaldehyde in the air from within the UFFI cavities are also reported.     

An Analysis of Ozone Generation in Irradiated Houston Air

Ambient ozone measurements in the United States and many other countries are traceable to a National Institute of Standards and Technology Standard Reference Photometer (NIST SRP). The NIST SRP serves as the highest level ozone reference standard in the United States, with NIST SRPs located at NIST and at many U.S. Environmental Protection Agency (EPA) laboratories. The International Bureau of Weights and Measures (BIPM) maintains a NIST SRP as the reference standard for international measurement comparability through the International Committee of Weights and Measures (CIPM). In total, there are currently NIST SRPs located in 20 countries for use as an ozone reference standard. A detailed examination of the NIST SRP by the BIPM and NIST has revealed a temperature gradient and optical path-length bias inherent in all NIST SRPs. A temperature gradient along the absorption cells causes incorrect temperature measurements by as much as 2 °C. Additionally, the temperature probe used for temperature measurements was found to inaccurately measure the temperature of the sample gas due to a self-heating effect. Multiple internal reflections within the absorption cells produce an actual path length longer than the measured fixed length used in the calculations for ozone mole fractions. Reflections from optical filters located at the exit of the absorption cells add to this effect. Because all NIST SRPs are essentially identical, the temperature and path-length biases exist on all units by varying amounts dependent upon instrument settings, laboratory conditions, and absorption cell window alignment. This paper will discuss the cause of, and physical modifications for, reducing these measurement biases in NIST SRPs. Results from actual NIST SRP bias upgrades quantifying the effects of these measurement biases on ozone measurements are summarized.

Implications: NIST SRPs are maintained in laboratories around the world underpinning ozone measurement calibration and traceability within and between countries. The work described in this paper quantifies and shows the reduction of instrument biases in NIST SRPs improving their overall agreement. This improved agreement in all NIST SRPs provides a more stable baseline for ozone measurements worldwide.     

Testing and Commercialization of Byproduct Dibasic cids as Buffer Additives for Limestone Flue Gas esulfurization Systems

Pilot plant (0.1 MW) tests and utility boiler full scale demonstration (194 MW) of byproduct organic dibasic acids (DBA) as buffer additives to limestone scrubbers have shown performance improvements equivalent to those achieved by the addition of pure adipic acid. Both SO₂ removal efficiency and limestone utilization increased, and no significant operating problems were observed with three of the four DBA tested. Chemical and biological evaluations of scrubber samples taken during the DBA testing indicated no detectable tOxicity or mutagenicity, and no significant environmental impact is expected as a result of DBA addition. Economic estimates indicate that substitution of DBA for pure adipic acid as a buffer additive will result in additive cost savings of 30 % or greater.     

Particulate,Carbon Monoxide,and Acid Emission Factors for Residential Wood Burning Stoves

Emissions from residential wood burning stoves are of Increasing concern in many areas. This concern is due to the magnitude of the emissions and the toxic and chemical characteristics of the pollutants. Recent testing of standard and new technology woodstoves has provided data for developing a family of particulate and carbon monoxide emission factor curves. This testing has also provided data illustrating the acidity of woodstove emissions. The particulate and carbon monoxide curves relate the actual stove emissions to the stove size and operating parameters of burn rate, fuel loading, and fuel moisture. Curves relating stove types to the acidity of emissions have also been constructed.

Test data show actual emissions vary from 3 to 50 grams per kilogram for particles and from 50 to 300 grams per kilogram for carbon monoxide. Since woodstove emissions are the largest single category of particulate emissions in many areas, it Is essential that these emissions be quantified specifically for geographic regions, allowing meaningful impact analysis modeling to be accomplished. Emission factors for particles and carbon monoxide are presented from several stove sizes and burn rates.

The acidic nature of woodstove emissions has been clearly demonstrated. Tests indicate woodstove flue gas condensate solutions to be predominantly in the 2.8 to 4.2 pH range. Condensate solutions from conventional woodstoves exhibited the characteristic buffering capacity of carboxylic acids when titrations were performed with a strong base. The environmental impact of buffered acidic woodstove emissions is not currently well understood; however, it is possible with the data presented here to make semi-quantitative estimates of acid emissions from particulate and carbon monoxide emission factors and wood use inventories.