Organochlorine concentrations in franciscana dolphins, Pontoporia blainvillei, from Brazilian waters

Blubber samples were collected from ten franciscana dolphins either incidentally captured in fishing operations or stranded on São Paulo (SP) and Paraná (PR) states littoral, Southeastern and Southern Brazilian coast, respectively. Determination of PCB, DDT and HCB concentrations were performed by capillary gas chromatograph coupled to electron capture detector (ECD). ΣDDT, ΣPCB and HCB concentrations ranged from 264 ng g⁻¹ to 5811 ng g⁻¹ lipid, from 909 ng g⁻¹ to 5849 ng g⁻¹ lipid and from 10 ng g⁻¹ to 61 ng g⁻¹ lipid, respectively. Regarding DDTs, the distribution of the mean percentages decreased in the following order: p,p′-DDE > p,p′-DDD > p,p′-DDT. The ΣDDT/ΣPCB ratio varied between 0.27 and 0.42 in Northern and Central SP coast, while in Southern SP and PR coast the values were 1.6 and 1.9, respectively. Dissimilarities in ΣDDT/ΣPCB ratios point to different sources of organochlorine compounds to franciscana dolphins in the study area. Considering the endocrine disruptive action of organochlorine compounds, the concentrations found in franciscana dolphins from Brazilian waters may represent an additional obstacle to the conservation of this endangered cetacean species.     

A preconcentration procedure for the determination of cadmium in biological material after on-line cloud point extraction

In this paper, a method involving on-line preconcentration with cloud point extraction for the determination of cadmium in biological samples is presented. The procedure is based on the sorption of micelles containing Cd(II) ions and the reagent 4-(5'-bromo-2'-thiazolylazo)orcinol (Br-TAO) in a minicolumn packed with polyester. The surfactant Triton X-114 was used in the formation of micelles. After sorption, the Cd(II) ions were desorbed from the minicolumn with acid eluent and determined by flame atomic absorption spectrometry. Parameters influencing the cloud point extraction were studied. The method showed a detection limit of 0.5 μg l(-1) and an enhancement factor of 27. The accuracy was tested by determination of cadmium in certified reference materials (spinach leaves 1570a and tomato leaves 1573a) from the National Institute of Standards and Technology.     

The effects of the nitrofuran furaltadone on Ulva lactuca

The use of pharmaceuticals in the food production industry as prophylatic and therapeutic agents is necessary to promote animal health, but may entail significant consequences to natural ecosystems, especially in the cases of overdosing and use of banned pharmaceuticals. The vast effects that antibiotics released into the environment have on non-target organisms are already under the scope of researchers but little attention has been given to primary producers such as macroalgae. The present study assessed furaltadone’s, an antibacterial agent illegally used for veterinary purposes, uptake capacity by Ulva lactuca and its effect in the growth of this cosmopolitan macroalgae. Differences in macroalgal growth were shown when submitted to prophylactic and therapeutic concentrations of furaltadone in the water (16 and 32 μg mL⁻¹, respectively). The therapeutic concentration caused higher growth impairment than the prophylactic treatment did, with 87.5% and 58% reductions respectively. Furthermore, together with data collected from the accumulation assays, with values of internal concentrations as high as 18.84 μg g⁻¹ WW, suggest that the macroalgae U. lactuca should be included in field surveys as a biomonitor for the detection of nitrofurans.     

Study of controlled migration of cadmium and lead into foods from plastic utensils for children

Lead (Pb) is a highly neurotoxic chemical element known for reducing intelligence quotient (IQ) and promoting antisocial behavior in children and adolescents, while cadmium (Cd) is a carcinogenic bioaccumulative element. Both these metals are included in the priority pollutant list of the United States Environmental Protection Agency and in the WHO List of Chemicals of Major Public Health Concern, where contaminated foods and beverages are the most common pathways of exposure. The objective of this study was to determine total Cd and Pb levels in colored plastic utensils (cups, mugs, bowls, feeding bottles, and plates) for use by children and to measure the specific migration of these elements into beverages and foods. Total contaminant levels were determined using a handheld X-ray fluorescence analyzer. Specific migration tests were conducted using the simulant solutions acetic acid 3% (m/v) and water. Migration levels were determined by ICP-MS. Specific migration tests for Pb were also performed on commercially available samples (cola soft drink, orange juice, vinegar, and milk), with levels determined by graphite-furnace atomic absorption spectrometry (GF-AAS). A total of 674 utensils were analyzed in loco at major commercial centers in Greater São Paulo, of which 87 were purchased for containing Cd and Pb concentrations above permitted limits. Mean concentrations of the metals detected in the purchased utensils were 1110 ppm for Pb and 338 ppm for Cd. For specific migration assays, Pb levels were 187, 13, and 380 times above the permitted limit (0.01 mg.kg -1) for acetic acid, water, and orange juice, respectively. Cd levels were 50 and 2.4 times above the maximum permitted limit (0.005 mg.kg -1) for acetic acid and water, respectively. The districts where the utensils were purchased were grouped according to their social vulnerability index and compared using ANOVA. Pb levels were different between low and medium/high social vulnerability groups (p?=?0.006). The findings corroborate the initial hypothesis that these utensils constitute a major source of exposure to PTEs such as Cd and Pb, pointing to the need for stricter regulation and inspection by the Brazilian regulatory agencies.

     

Determination of copper in biological samples by flame atomic absorption spectrometry after precipitation with Me-BTAP

A simple and sensitive method was developed for determination of trace copper by direct precipitation preconcentration and detection with Flame Atomic Absorption Spectrometry (FAAS). The reagent 2-[2'-(6-methyl-benzothiazolylazo)]-4-aminophenol (Me-BTAP) was used as precipitating agent. The experimental conditions for the quantitative precipitation of copper, such as pH, amount of reagents, temperature and the effect of diverse ions on the precipitation have been investigated. It was found that copper is quantitatively extracted (> or =95%) and the method provides a sensitivity enhancement of 40-fold for a 10 ml sample volume with a detection limit of 0.5 microg l(-1). The proposed method was successfully applied for the determination of trace copper in water, urine and biological samples.     

A laboratory study on the MSW mechanical behavior in triaxial apparatus

Shear strength characterization of MSW materials is a mandatory task when performing analyses related to landfill design and landfill geometry improvements. Despite the considerable amount of research focusing on MSW mechanical behavior there remain certain aspects which are not completely understood and deserve attention in particular the case of the undrained behavior of MSW. This paper presents the results of a comprehensive laboratory testing program using a large-scale triaxial apparatus at the Federal University of Bahia, Salvador, Brazil. The effect of factors such as confining pressure, unit weight, fiber content, rate of loading and over-consolidation on the MSW mechanical response were investigated. Tested samples presented typical MSW shear/strain curves (concave upward) in all the tests, despite the pore water pressure reaching levels almost equal to the confining pressure. The obtained results show that increasing confining stress, unit weight, loading rate, fiber content and over-consolidation lead to an increase in the MSW shear strength. The importance of the fibrous components in the waste behavior is highlighted and graphs showing the variation of the MSW shear strength with fiber content in different drainage conditions are shown. The authors believe these results could be of interest to many companies, especially considering the new trend of plastic material recycling (prior landfilling) for energy recovery purposes.     

An attempt to perform water balance in a Brazilian municipal solid waste landfill

This paper presents an attempt to model the water balance in the metropolitan center landfill (MCL) in Salvador, Brazil. Aspects such as the municipal solid waste (MSW) initial water content, mass loss due to decomposition, MSW liquid expelling due to compression and those related to weather conditions, such as the amount of rainfall and evaporation are considered. Superficial flow and infiltration were modeled considering the waste and the hydraulic characteristics (permeability and soil-water retention curves) of the cover layer and simplified uni-dimensional empirical models. In order to validate the modeling procedure, data from one cell at the landfill were used. Monthly waste entry, volume of collected leachate and leachate level inside the cell were monitored. Water balance equations and the compressibility of the MSW were used to calculate the amount of leachate stored in the cell and the corresponding leachate level. Measured and calculated values of the leachate level inside the cell were similar and the model was able to capture the main trends of the water balance behavior during the cell operational period.     

Ontogenetic variation in digestive proteinase activity of larvae and postlarvae of the pink shrimp Farfantepenaeus paulensis (Crustacea: Decapoda: Penaeidae)

Proteinase (endopeptidase), trypsin-like and chymotrypsin-like activities were examined throughout the ontogenetic development of cultured Farfantepenaeus paulensis. Whole individuals from different larval and postlarval stages, and the hepatopancreas of adults were homogenized and assayed to quantify the enzyme activities of specific substrates. Proteinase activity was identified by substrate-SDS-polyacrylamide gel electrophoresis. Specific inhibitors for trypsin (TLCK), chymotrypsin (TPCK) and serine proteinases (PMSF) were used to identify activity zones of these enzymes in gels. Protein-specific activity of total proteinases, trypsin and chymotrypsin was negligible at the egg stage and at Nauplius III, increasing in the first protozoeal substage (PZ I), and reaching a peak at PZ III; it decreased again in the subsequent postlarval substages. Different patterns of proteinase activity were observed in SDS-PAGE zymograms during ontogenetic development. Active bands of 14.6, 16.4, 17.5, 19.5, 22.5, 23.9, 25.8, 28.9, 32.0, 34.4, 37.7, and 42.2 kdaltons were detected in the adult hepatopancreas. Proteolytic activity was detected on gels in PZ I, and intense activity zones of 16.4, 17.5 and 19.5 kdaltons were found up to Mysis I (M I). Intense bands of 39.1 and 53.5 kdaltons were observed only at PZ III and M I. Band-activity intensity decreased after metamorphosis to the postlarval stage (PL). The chymotrypsin inhibitor TPCK had no effect on the proteinase bands. Active zones in gel inhibited with both TLCK and PMSF were considered to represent trypsin. The inhibitory effect of PMSF alone on proteinase extracts indicated chymotrypsin activity. TLCK and PMSF inhibition also varied during ontogenetic development. The inhibition of bands recorded between 14.6 and 21.7 kdaltons suggested the presence of low molecular weight trypsin in F. paulensis. The 39.1 kdaltons band observed at PZ III and M I were trypsin-like. On the other hand, bands of 28.9, 32 and 37.7 kdaltons from the adult hepatopancreas seem to represent a chymotrypsin. We conclude that the recorded variation in enzyme activity may be associated with morphological and behavioral changes during penaeid ontogenetic development. The higher enzyme activity at PZ II, PZ III and M I may reflect the increased energy turnover associated with intense swimming behavior and food ingestion. Received: 24 September 1998 / Accepted: 20 August 1999     

What Influences Innovation Adoption by Water Managers? Climate Information Use in Brazil and the United States1

Abstract: This paper examines the use of climate forecasting in water management in Brazil and the United States (U.S.). Specifically, it seeks to understand how different institutional arrangements shape the willingness and ability of water managers to incorporate technoscience, especially seasonal climate forecasting (SCF), in their decision‐making process. It argues that among the many factors shaping the willingness of water managers to use SCF, institutional design and change is critical to explain different patterns in Brazil and the U.S. Moreover, factors related to individual flexibility, discretion, and accountability also affect the ability of managers to use climate information in water management. This paper finds that while water managers in the U.S operate in a mostly fragmented and risk‐averse system – which constrains the adoption of innovation – decision makers in Brazil can afford more flexibility to introduce new decision tools as a result of widespread water management reforms initiated in the 1990s.     

Strategies for applying gray water effluent on ornamental sunflower crops

Environmental Science and Pollution Research - In a context of scarcity of good quality water, reuse is a mandatory practice to increase water availability, thus allowing the exploitation of more...