Assessment of polychlorinated dibenzo-p-dioxin and dibenzofuran emissions from a hazardous waste incineration plant using long-term sampling equipment

The aim of this work is to evaluate the performance of a continuous monitoring system for the analysis of the mass concentration of PCDD/Fs from stationary sources. Data was acquired from a modern, state of the art, hazardous waste thermal treatment plant for a period of more than 2 years using a commercial available continuous monitoring system. The study consisted of a total of 16 samples, collected in periods from 1 week to 2 months resulting in an average of 360 m³ sampled flue gas per sample. The study showed the system was able to confirm that for a period of more than 2 years the plant was complying with the limit of 0.1 ng I-TEQ/Nm³. In addition, the data showed the typical fingerprint of such installations which is useful for example in impact studies. Long-term samples were compared to five short-term samples (6 h) collected every 6 months during the study period. Principal component analysis was applied to PCDD/Fs obtained data as useful statistical tool to find out trends and similarities between different samples. Improvement in terms of representativeness of data was achieved through continuous assessment since the starts of the project. The obtained data was further used to determine the emission factor for this activity and the total annual PCDD/Fs release to the atmosphere.     

Decontamination trends in the aquacultured fish gilthead seabream (Sparus aurata) after feeding long-term a PCDD/F spiked feed

Aquacultured fish gilthead seabream (Sparusaurata), previously exposed to low levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) trough the diet for a 13 months period, were fed on a clean feed for another 22 months. Gilthead seabream is a protandrous hermaphrodite species and this “decontamination” period coincided with the stages of sex differentiation, maturity and reproduction of the fish. PCDD/F levels in the fish tissues (i.e. muscle, liver, perivisceral fat and gonads), expressed in pg WHO-TEQ g⁻¹ fresh weight, showed a general decreasing trend during the “decontamination” period. However, this general trend varied among tissues and was also dependent on sex and lipid contents. Toxicological effects affecting fish behaviour and hepatic marker responses were also evaluated. The results pointed out that exposure to PCDD/Fs did not have an impact on fish development and reproduction, since the proportion of sexes found after the sex reversal process was within the normal range described for this species. In addition, long-term exposure to low PCDD/F levels did not significantly affect the response of most of the biochemical markers considered. On the contrary, some of them (e.g. EROD activity) showed variations in their responses during the sex differentiation process and onwards. Finally, the hepatic AhR mRNA levels increased during dioxin exposure but they returned to values typical for non-exposed fish after the “decontamination” period.     

Effects of nitrogen deposition and soil fertility on cover and physiology of Cladonia foliacea (Huds.) Willd., a lichen of biological soil crusts from Mediterranean Spain

We are fertilizing a thicket with 0, 10, 20 and 50 kg nitrogen (N) ha⁻¹ yr⁻¹ in central Spain. Here we report changes in cover, pigments, pigment ratios and FvFm of the N-tolerant, terricolous, lichen Cladonia foliacea after 1-2 y adding N in order to study its potential as biomarker of atmospheric pollution. Cover tended to increase. Pigments increased with fertilization independently of the dose supplied but only significantly with soil nitrate as covariate. β-carotene/chlorophylls increased with 20-50 kg N ha⁻¹ yr⁻¹ (over the background) and neoxanthin/chlorophylls also increased with N. (Neoxanthin+lutein)/carotene decreased with N when nitrate and pH seasonalities were used as covariates. FvFm showed a critical load above 40 kg N ha⁻¹ yr⁻¹. Water-stress, iron and copper also explained variables of lichen physiology. We conclude that this tolerant lichen could be used as biomarker and that responses to N are complex in heterogeneous Mediterranean-type landscapes.     

Amendment application in a multi-contaminated mine soil: effects on soil enzymatic activities and ecotoxicological characteristics

Several amendments were tested on soils obtained from an arsenopyrite mine, further planted with Arrhenatherum elatius and Festuca curvifolia, in order to assess their ability to improve soil's ecotoxicological characteristics. The properties used to assess the effects were: soil enzymatic activities (dehydrogenase, β-glucosidase, acid phosphatase, urease, protease and cellulase), terrestrial bioassays (Eisenia fetida mortality and avoidance behaviour), and aquatic bioassays using a soil leachate (Daphnia magna immobilisation and Vibrio fischeri bioluminescence inhibition). The treatment with FeSO₄ 1 % w/w was able to reduce extractable As in soil, but increased the extractable Cu, Mn and Zn concentrations, as a consequence of the decrease in soil pH, in relation to the unamended soil, from 5.0 to 3.4, respectively. As a consequence, this treatment had a detrimental effect in some of the soil enzymatic activities (e.g. dehydrogenase, acid phosphatase, urease and cellulase), did not allow plant growth, induced E. fetida mortality in the highest concentration tested (100 % w/w), and its soil leachate was very toxic towards D. magna and V. fischeri. The combined application of FeSO₄ 1 % w/w with other treatments (e.g. CaCO₃ 1 % w/w and paper mill 1 % w/w) allowed a decrease in extractable As and metals, and a soil pH value closer to neutrality. As a consequence, dehydrogenase activity, plant growth and some of the bioassays identified those as better soil treatments to this type of multi-contaminated soil.     

An Evaluation of the LPG Vehicles Program in the Metropolitan Area of Mexico City

ABSTRACT

The environmental agency in the metropolitan area of Mexico City has launched a program to introduce more energy-efficient modes of transport, one of which is the use of alternative and less polluting fuels. With that perspective in mind, a liquefied petroleum gas (LPG) fleet of vehicles is exempt of the mandatory "one day without a car" program if the emission of pollutants is below the standard authorized for that specific purpose. Today, about 28,000 light-duty vehicles and heavy-duty trucks circulate in the area, most of them as aftermarket converted vehicles. In this work, we evaluated regulated exhaust emission and other parameters on 134 representative vehicles of that fleet. From the data obtained, an estimate of emission factors and their contribution to the global emission in the metropolitan area is provided. It is concluded that more than 95% of the in-use vehicles using LPG presented regulated emissions which exceeded in one or more the environmental regulations values required for certification. The poor maintenance of the vehicles and the type of conversion kit installed could be the culprits of the results obtained.     

Dioxin emissions from thermal waste management in Medellín, Colombia: present regulation status and preliminary results

Preliminary results of a study undertaken to characterize dioxin and furan releases from waste incineration plants operating in Medellín-Colombia are presented. Emission and fly ash samples were collected from representative plants burning medical and industrial residues to characterize PCDD/PCDF levels. Analyses were carried out following European standards for stationary gas emissions EN-1948:1996 and US EPA 1613 (fly ashes). Final extracts were analyzed by both high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC-HRMS) and high resolution gas chromatography coupled to ion trap tandem mass spectrometry (HRGC-ITMS/MS). Preliminary results revealed emission levels of 1-30.3 ng I-TEQ/Nm3 depending on whether or not an air pollution control system (APCS) was installed. Fly ashes contained 8.5-68 ng I-TEQ/g. Critical issues that should be addressed in an assessment and in developing waste management plans in Colombia are discussed.     

Effect of gas composition in Chemical-Looping Combustion with copper-based oxygen carriers: Fate of sulphur

Chemical-Looping Combustion (CLC) is an emerging technology for CO₂ capture because separation of this gas from the other flue gas components is inherent to the process and thus no energy is expended for the separation. Natural or refinery gas can be used as gaseous fuels and they may contain different amounts of sulphur compounds, such as H₂S and COS. This paper presents the combustion results obtained with a Cu-based oxygen carrier using mixtures of CH₄ and H₂S as fuel. The influence of H₂S concentration on the gas product distribution and combustion efficiency, sulphur splitting between the fuel reactor (FR) and the air reactor (AR), oxygen carrier deactivation and material agglomeration was investigated in a continuous CLC plant (500 W_th). The oxygen carrier to fuel ratio, ?, was the main operating parameter affecting the CLC system. Complete fuel combustion were reached at 1073 K working at ? values ≥1.5. The presence of H₂S did not produce a decrease in the combustion efficiency even when working with a fuel containing 1300 vppm H₂S. At these conditions, the great majority of the sulphur fed into the system was released in the gas outlet of the FR as SO₂, affecting to the quality of the CO₂ produced. Formation of copper sulphide, Cu₂S, and the subsequent reactivity loss was only detected working at low values of ? ≤ 1.5, although this fact did not produce any agglomeration problem in the fluidized beds. In addition, the oxygen carrier was fully regenerated in a H₂S-free environment. It can be concluded that Cu-based oxygen carriers are adequate materials to be used in a CLC process using fuels containing H₂S although quality of the CO₂ produced is affected.     

PCDD/Fs and DL-PCBs in feeding fats obtained as co-products or by-products derived from the food chain

Among the tasks included in the "Quality and safety of feeding fats obtained from co-products or by-products of the food chain" Project, supported by the European Union and included in the 6th Framework Program, a number of fats and oils collected as co- or by-products from the food chain were selected for the determination of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and 'dioxin-like' polychlorinated biphenyls (DL-PCBs). In the majority of the cases these samples are currently employed as feed ingredients. Nevertheless, additional fats, which are forbidden for feedstuff purposes were also considered in this study. In general terms, fats and oils were classified taking into account their nature and the processes applied to obtain these co- or by-products. PCDD/F and DL-PCB levels were evaluated in a first group of samples composed of fish oils, animal fats and lecithins. As expected, fats and oils with an animal origin presented higher concentrations, expressed in pg WHO-TEQ/g, compared to the levels found in vegetable samples like lecithins. The category of fish oils had the highest values for both PCDD/Fs and the sum of PCDD/Fs and DL-PCBs, with some samples showing levels above the maximum established at the present legislation related to the presence of PCDD/Fs and DL-PCBs in animal feed [Commission Directive 2006/13/EC of 3 February 2006 amending Annexes I and II to Directive 2002/32/EC of the European Parliament and of the Council on undesirable substances in animal feed as regards dioxins and dioxin-like PCBs. Official Journal of the European Communities L32, 44-53]. In a second group, fats and oils with a more complex composition obtained from different transformation processes or even mixtures of fats were considered; thus, acid oils from chemical refining, acid oils from physical refining, recycled cooking oils, oils extracted from exhausted bleaching earths, hydrogenated by-products, fatty acids calcium soaps and miscellaneous fats were analyzed. The data revealed a significant variability in PCDD/F and DL-PCB levels, expressed in pg WHO-TEQ/g, in these products. It has to be pointed out that the analyses of fats and oils belonging to these categories of products were sometimes difficult due to the complexity of the samples. In terms of legislation most of these samples cannot be easily included into one of the specific categories of substances intended for feedstuff purposes that are regulated in Commission Directive 2006/13/EC.     

Organochlorine compounds (PCBs, PCDDs and PCDFs) in seafish and seafood from the Spanish Atlantic Southwest Coast

Concentrations and congener specific profiles of PCDD/Fs and PCBs were determined in edible fish and seafood species from the Coast of Huelva, in the Spanish southwest Atlantic coast. Five fish species, namely wegde sole (Dicologoglossa cuneata), common sole (Solea vulgaris), white seabream (Diplodus sargus), sardine (Sardina pilchardus), angler fish (Lophius piscatorius), two shellfish species (Donax trunculus and Chamelea gallina), common cuttlefish (Sepia officinalis) and prawns (Parapenaeus longirostris), frequently found and consumed in the area were analysed. Concentrations ranged from 861 to 23787pg/g wet weight for total PCBs, while 2,3,7,8-PCDD/Fs showed concentrations ranging from 0.2 to 1.18pg/g wet weight. WHO-TEQ concentrations ranged from 0.038 to 0.186pg WHO-TEQ(PCDD/Fs)/g wet weight, values well below the maximum concentrations established by the EU. When non- and mono-ortho PCBs were included the values increased to a maximum of 0.99pg WHO-TEQ(PCDD/Fs+PCBs)/g wet weight. The PCB and PCDD/F accumulation pattern found in the samples analysed showed a distribution typically reported for marine samples, and no remarkable differences were found between species. The PCBs were the ones contributing with the highest percentage to the total TEQ content in most species studied. Concerning the seafood, specially prawns and shellfish, the opposite was observed and PCDD/Fs were found to contribute with a higher percentage than PCBs. The congener specific contribution to the TEQ showed PCB 126 followed by 1,2,3,7,8-PeCDD and 2,3,4,7,8-PeCDF as the most abundant ones.