Air pollution perception in ten countries during the COVID-19 pandemic

As largely documented in the literature, the stark restrictions enforced worldwide in 2020 to curb the COVID-19 pandemic also curtailed the production of air pollutants to some extent. This study investigates the perception of the air pollution as assessed by individuals located in ten countries: Australia, Brazil, China, Ghana, India, Iran, Italy, Norway, South Africa and the USA. The perceptions towards air quality were evaluated by employing an online survey administered in May 2020. Participants (N = 9394) in the ten countries expressed their opinions according to a Likert-scale response. A reduction in pollutant concentration was clearly perceived, albeit to a different extent, by all populations. The survey participants located in India and Italy perceived the largest drop in the air pollution concentration; conversely, the smallest variation was perceived among Chinese and Norwegian respondents. Among all the demographic indicators considered, only gender proved to be statistically significant.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01574-2.     

Investigation of the effects of static magnetic field on apoptosis in bone marrow stem cells of rat

This research was carried out to evaluate the influence of static magnetic field on the rate of apoptosis in bone marrow stem cells (BMSCs) of rats. Extracted cells were suspended in αMEM as a culture media for 48 h. After that, cells were exposed to 15 mT static magnetic field (SMF) for 5 h, incessantly with or without FeCl₂. The rate of apoptosis was then assessed via flow cytometery. The results showed that either treatment with FeCl₂ or exposure to SMF enhanced the rate of apoptotic cells. Moreover, cells that were treated simultaneously with FeCl₂ and SMF have higher rate of apoptosis. An increase in apoptosis by 26.5% was induced by SMF alone and an increase in apoptosis by 28.2% was induced by a combination of FeCl₂ and SMF, compared to their corresponding controls. The results recommended that the effects of SMF on apoptosis may be related to increment of the number of free radicals in the cells.     

Complexing agents for metal removal using ultrafiltration membranes: a review

Environmental Chemistry Letters - Water pollution by human activities is major issue. In particular, toxic metals are of particular concern, thus calling for advanced methods to remove metals from...     

Fish and shrimp waste management at household and market in Bushehr,Iran

Journal of Material Cycles and Waste Management - The aim of this study was to investigate the estimation and management of fish and shrimp wastes in Bushehr province. Two-part questionnaire...     

Role of organic matter in microbial transport during irrigation with sewage effluent

Reduction of migration of fecal coliforms (FC) and streptococci (FS) by limiting the leaching in effluent-irrigated soil was tested in lysimeters packed with quartz sand without or with added biosolids compost or with one of two clayey soils. The 200-L, 70-cm-deep lysimeters were either planted with a Eucalyptus camaldulensis or an Oroblanco citrus tree (in the sand only), or not planted. The Eucalyptus was irrigated with oxidation pond effluent (OPE) and the Oroblanco with mechanical-biological treatment plant effluent (MBTPE). The leaching fraction (LF) ranged from 0.2 to about 1.0, and the residence time (RT) from under 1 to 40 d. The Eucalyptus was also tested under intermittent leaching (RT 11-20 d) and deficit irrigation (without leaching for about 6 mo) regimes. Under MBTPE irrigation there was little or no leaching of FC and FS. Under OPE irrigation at LF 1 without a Eucalyptus there was little or no bacterial leaching at irrigation rates below 40 L d(-1) per lysimeter (RT > or = 0.8 d). Bacterial counts in the leachate were substantial in the presence of a Eucalyptus tree under LF 0.2 and intermittent leaching regimes, and when sand-packed unplanted lysimeters received OPE effluent at >45 L d(-1). Bacterial recovery peaked at LF 0.2, at up to 45% of the input level. At LF 1 (RT 0.6-2.8 d) and with intermittent leaching the recoveries were minute. Bacterial counts in the washout from the deficit-irrigated lysimeters were typical of nonpolluted soils. The bacterial concentration and recovery patterns in the leachate mostly matched the organic carbon (OC) load in the irrigation water, and its concentration and bioavailablity in the leachate. We related the leaching patterns of the fecal bacteria to their relative reproduction and die-off rates, and to the dependence of their regrowth on available carbon sources.     

Harvesting of microalgae biomass from the phycoremediation process of greywater

The wide application of microalgae in the field of wastewater treatment and bioenergy source has improved research studies in the past years. Microalgae represent a good source of biomass and bio-products which are used in different medical and industrial activities, among them the production of high-valued products and biofuels. The present review focused on greywater treatment through the application of phycoremediation technique with microalgae and presented recent advances in technologies used for harvesting the microalgae biomass. The advantages and disadvantages of each method are discussed. The microbiological aspects of production, harvesting and utilization of microalgae biomass are viewed.     

Policy challenges and approaches for the conservation of mangrove forests in Southeast Asia

Many drivers of mangrove forest loss operate over large scales and are most effectively addressed by policy interventions. However, conflicting or unclear policy objectives exist at multiple tiers of government, resulting in contradictory management decisions. To address this, we considered four approaches that are being used increasingly or could be deployed in Southeast Asia to ensure sustainable livelihoods and biodiversity conservation. First, a stronger incorporation of mangroves into marine protected areas (that currently focus largely on reefs and fisheries) could resolve some policy conflicts and ensure that mangroves do not fall through a policy gap. Second, examples of community and government comanagement exist, but achieving comanagement at scale will be important in reconciling stakeholders and addressing conflicting policy objectives. Third, private‐sector initiatives could protect mangroves through existing and novel mechanisms in degraded areas and areas under future threat. Finally, payments for ecosystem services (PES) hold great promise for mangrove conservation, with carbon PES schemes (known as blue carbon) attracting attention. Although barriers remain to the implementation of PES, the potential to implement them at multiple scales exists. Closing the gap between mangrove conservation policies and action is crucial to the improved protection and management of this imperiled coastal ecosystem and to the livelihoods that depend on them.     

Comparison of steel,aluminum and composite bonnet in terms of pedestrian head impact

Material selection for automotive closures is influenced by different factors such as cost, weight and structural performance. Among closures, the automotive bonnet must fulfill the requirements of pedestrian safety which is evaluated by child and adult headform impactors. The mechanisms of injury are complex, therefore; the Head Injury Criterion (HIC) which shows a measure of the likelihood of head injury arising from an impact is developed. HIC includes the effects of head acceleration and the duration of the acceleration.In this paper a new finite element model has been developed which is capable to simulate head impact phenomenon between headform impactors and composite bonnet. Then the behavior of three identical bonnets made of steel, aluminum and composite have been investigated by the developed model. It is shown that the energy absorption of aluminum bonnet is smaller than steel and composite ones and for keeping the aluminum bonnet at the same level of stiffness, it is necessary to increase the thickness. Therefore, the aluminum bonnet needs a larger space between the bonnet and the parts in the engine compartment. It is shown that although the displacement of headform for composite bonnet is more than that of steel and aluminum ones, but the amount of HIC’s, which are measured at the collision points are much less than those measured at the same collision points for steel and aluminum bonnets.In addition the comparison of three bonnets of the different materials has been done to highlight cost, weight, and structural performance issues.     

On the feasibility of producing polymer–metal composites via novel variant of friction stir processing

In this study a novel variant of friction stir processing was developed for producing of polymer metal surface or bulk composites in order to enhance the mechanical, electrical and thermal properties. For this purpose, a novel tooling system was designed consists of a rotating pin, a stationary shoulder and a heating system located inside the shoulder. In present paper, for preliminary study high-density polyethylene and copper powder was selected as polymeric matrix and metallic additive, respectively. Surface quality, microstructure, ultimate tensile strength and the modulus of elasticity were determined for each prepared sample. From experimental tests, it was found that this approach is an efficient method for producing of polymer–metal composites.