A comprehensive review of the energy efficiency on nano coated fin and tube condenser

The condenser is a piece of equipment used to effectively transfer heat from water to the environment. The fin and tube condenser is the most commonly used in commercial applications. The improved performance of heat transfer in the fin and tube condenser is a significant area of study all over the world because optimizing the efficiency of heat transfer in the condenser will contribute to enhancing the effectiveness of system performance. The vapor deposition, plasma spray, and thermal spray techniques are being used, and it is determined that a heat transfer enhancing coating improves condenser performance. This review discusses the nanomaterial coating over the fin and tube condenser in detail. The various nanomaterial coatings with various propositions and coating methods had been discussed with the evidence of previous researchers. At a 50-degree inclination angle on the condensate plate, the condensate over the coating surface increases by more than 30%. The thermal properties of the working fluid are improved over the condenser, and the overall effectiveness of the condenser is increased by approximately 40% over the non-coated condenser. A 1% volumetric concentration of Nanoparticles in the coated material achieves a maximum efficiency increase of 78.7%.     

Investigating effect of proton-exchange membrane on new air-cathode single-chamber microbial fuel cell configuration for bioenergy recovery from Azorubine dye degradation

Environmental Science and Pollution Research - One of the biggest challenges of using single-chamber microbial fuel cells (MFCs) that utilize proton-exchange membrane (PEM) air cathode for...     

The nexus between financial development,globalization, and environmental degradation: Fresh evidence from Central and Eastern European Countries

Environmental Science and Pollution Research - Global warming and greenhouse gas emissions have become a severe threat to our ecosystem. Prior studies on environment posit that ample exhaustion of...     

Quantification of polychlorinated biphenyl contamination using human placenta as biomarker from Punjab Province,Pakistan

Environmental Science and Pollution Research - The present study biomonitored the placental polychlorinated biphenyl (PCB) concentrations in women from Punjab Province, Pakistan, that provides the...     

Assessing the economic value of urban green spaces in Kuala Lumpur

Environmental Science and Pollution Research - This study assessed the economic value of public urban green spaces (UGSs) in Kuala Lumpur (KL) city by using the hedonic price method (HPM). It...     

Developing the first halophytic turfgrasses for the urban landscape from native Arabian desert grass

Environmental Science and Pollution Research - Climate change is occurring and is influencing biological systems through augmented temperatures, more inconstant precipitation, and rising CO2 in the...     

Oil-Induced environmental Kuznets curve in organization of petroleum exporting countries (OPEC)

This study investigates the environmental Kuznets curve (EKC) hypothesis in 10 of the Organization of Petroleum Exporting Countries (OPEC). To realize the study’s aims a time series model is built based on the period 1977–2008, utilizing the ecological footprint as an environmental indicator and income, labour, capital, oil consumption and oil price as economic indicators. Employing the Autoregressive Distributed Lag (ARDL) approach, by comparing the short and long-run income elasticities, the EKC hypothesis is present in six OPEC countries namely Algeria, Iraq, Venezuela, Nigeria, Qatar and Kuwait. Moreover, the Toda–Yamamoto–Dolado–Lütkepohl (TYDL) causality tests outcome show that, after oil consumption, the most significant factors in increasing ecological footprint are labor and capital. This implies the relocation of pollution intensive industries to almost all of the OPEC countries. However, oil prices reduce environmental damage by its negative effect on the ecological footprint. From the outcome of this study it is important for the investigated countries to reduce their consumption of fossil fuel energy since it represents an important source of pollution. This can be achieved by allocating more labor and capital in projects and investments on renewable energy, energy efficiency and energy saving.     

Mangrove forest decline: consequences for livelihoods and environment in South Sulawesi

Mangrove forests in the tropics and subtropics grow in saline sediments in coastal and estuarine environments. Preservation of mangrove forests is important for many reasons, including the prevention of coastal erosion and seawater intrusion; the provision of spawning, nursery, and feeding grounds of diverse marine biota; and for direct use (such as firewood, charcoal, and construction material)—all of which benefit the sustainability of local communities. However, for many mangrove areas of the world, unsustainable resource utilization and the profit orientation of communities have often led to rapid and severe mangrove loss with serious consequences. The mangrove forests of the Takalar District, South Sulawesi, are studied here as a case area that has suffered from degradation and declining spatial extent during recent decades. On the basis of a post-classification comparison of change detection from satellite imagery and a survey of households, we provide an estimate of the mangrove change in the Takalar District during 1979–2011 and the consequences of those changes. Mangrove forest areas were reduced by 66.05 % (3344 hectares) during the 33-year period of analysis, and the biggest annual negative change in dense mangrove forest cover (8.37 %) occurred during the period 2006–2011. The changes were caused mainly by the mangrove clearing and conversion to aquaculture, and consequences have been increasing forest degradation, coastal abrasion, seawater intrusion, a decline in fish capture, a reduction in juvenile shrimp and milkfish, and outbreaks of shrimp disease. On the other hand, the clearing and impoundment of mangrove forests for shrimp and seaweed culture have provided a source of foreign exchange and new opportunities for employment in the study area.     

Effect of pH and alum dosage on the efficiency of microalgae harvesting via flocculation technique

Microalgae biomass is well known as a potential sustainable product for bio-based industry, which has reported encountering numerous difficulties during biomass harvesting and recovering. This study examined the effect of pH (5–12) and alum dosage (30–180 mg/L) for microalgae Botryococcus sp. harvested via flocculation technique. The optimum pH condition for Botryococcus sp. harvesting was measured to be 9.2, and the alum dosage was 100 mg/L. Both optimum values successfully harvested up to 95% microalgae biomass. This study revealed that flocculation efficiencies for alum are highly dependent on the range of pH and coagulant dosage that were applied during the process. Use of flocculation technique with alum as a coagulant represents a convenient technique for Botryococcus sp. biomass harvesting and is recommended for use in both small- and large-scale biomass industries.     

Marble industry effluents cause an increased bioaccumulation of heavy metals in Mahaseer (Tor putitora) in Barandu River,district Buner,Pakistan

Environmental Science and Pollution Research - The present study was conducted to evaluate the impact of marble industry effluents on the accumulation of heavy metals in selected tissues of...