Activated carbon from Ceiba pentandra hulls, an agricultural waste, as an adsorbent in the removal of lead and zinc from aqueous solutions

The ability of low-cost activated carbon prepared from Ceiba pentandra hulls, an agricultural waste material, for the removal of lead and zinc from aqueous solutions has been investigated. In the batch tests experimental parameters were studied, including solution pH, contact time, adsorbent dose and initial metal ions concentration. The adsorbent exhibited good sorption potential at pH 6.0. Maximum removal of lead (99.5%) and of zinc (99.1%) with 10 g/l of sorbent was observed at 50 mg/L sorbate concentration. Removals of about 60-70% occurred in 10 min, and equilibrium was attained at around 50 min for both metals. The functional groups (CO, SO,-OH) present on the carbon surface were responsible for the adsorption of metal ions. The adsorption parameters were analysed using both the Freundlich and Langmuir models. The data are better fitted by the Freundlich isotherm as compared to Langmuir model, and the adsorption capacities for lead and zinc were 25.5 and 24.1 mg/g, respectively. Kinetics of adsorption obeyed a second order rate equation and the rate constant was found to be 2.71 x 10(-2) and 2.08 x 10(-2) g/mg/min for lead and zinc, respectively. The desorption studies were carried out using dilute HCl, and the effect of HCl concentration on desorption was studied. Maximum desorptions of 85% for lead and 78% for zinc were attained with 0.15 M HCl.     

A comparative assessment of the impact of different occupations on workers' static musculoskeletal fitness.

An ergonomic assessment of the involvement of static muscular forces like back strength, grip strength and pinch strength in different occupations was made. A study was conducted on 45 normal adult males (15 subjects per group) which included video display terminal (VDT) operators, industrial workers and safety inspectors. Their maximum back strength, handgrip strength and pinch strength were measured with dynamometers. The observed values of back strength were significantly lower in VDT operators while significantly higher in safety inspectors and moderate in industrial workers. The values of grip strength and pinch strength of all sample groups were more or less similar. The findings clearly indicate that static muscular strength varies significantly in different occupations. Heavy static muscular load might lead to an accumulation of metabolic waste and toxins on the back resulting in lower back strength in VDT operators and industrial workers.     

Allelopathic response of <Emphasis Type="Italic">Vetiveria zizanioides</Emphasis> (L.) Nash on members of the family Enterobacteriaceae and <Emphasis Type="Italic">Pseudomonas</Emphasis> spp.

The biological removal of phosphates was carried as a part of treatment strategy. Vetiveria zizanioides (L.) Nash belonging to the family Poaceae was used for biological removal of biostimulants. Vetiver reportedly has mycorrhizal association; besides having potential for removal of PO₄ ⁻³ also showed allelopathic affect on the microorganisms present in the water. In fact after a period of 96 h old roots of this plant have been found to have killing effects on the E. coli, Enterobacter spp. Pseudomonas spp. belonging to the family Enterobacteriaceae. The paper is opening a new face of study.     

A study of the workload of underground trammers in the Ranigang coal field area of West Bengal, India.

Thirty healthy trammers were examined in underground haulage mines during their normal activity. Physiological strain in terms of heart rate (HR) varied between 101.6 and 104.7 beats/min with mean net cardiac cost of 33.06 and 34.06 beats/min for younger and older groups respectively. The average relative cardiac cost was lower for younger subjects than for older ones. Oxygen consumption (VO2) was measured with an Oxylog-II machine (UK); subsequently values were estimated. Maximum aerobic capacity was estimated with an indirect method following a standard step test protocol. The responses revealed that the average VO2 during the activity was 0.75 and 0.8 L/min, which corresponded to energy expenditure (EE) of 3.8 and 3.97 Kcal/min for younger and older subjects respectively. The workload in terms of HR and EE was moderate, whereas the aerobic strain experienced by aged workers was above the acceptable level.     

Genetic diversity in some perennial plant species with-in short distances

Distinct morphophysiological variations observed for over 2 years with-in short distances among four perennial plants indicated genetic diversity among the lines growing at three places. The isozyme and SDS polyacrylamide gel banding patterns as genetic markers were used to investigate four perennial species, namely Dalbergia sissoo Roxb., Delonix regia (Boj.) Refin., Cassia fistula L. and Calotropis procera R. Br. Plant materials collected from three locations (Agra, Gwalior and Lucknow) differing in climo-edaphic variables were examined for 4 enzyme systems, viz., esterase, polyphenol oxidase, peroxidase and superoxide dismutase (EST, PPO, PRX and SOD). Among the four isozymes SOD and PRX revealed best discriminating power. Protein banding patterns as well as zymogram revealed that Dalbergia sissoo growing at Gwalior was closer to that of Agra; Delonix regia depicted highest similarity between Lucknow and Agra and Calotropis procera of Lucknow location was more closer to Gwalior than Agra. The results confirm genetic diversity in the species as a means of adaptation to differing climo-edaphic variables.     

Bayesian approach to estimating margin of safety for total maximum daily load development

A Bayesian-updating approach is presented to the estimation of total uncertainty-based Margin of Safety (MOS) for Total Maximum Daily Load (TMDL) calculations. Probability distributions are presented to construct the likelihood function, the prior probability distribution, and the posterior (total uncertainty) probability distribution. The Bayesian-updating approach is demonstrated through a case study for the Lower Amite River, Louisiana. The posterior probability distribution-based on the Bayesian approach updates the standard deviation of summer dissolved oxygen in the Amite River from 1.88 mg/L to 2.10 mg/L when the total uncertainty is considered. Results from the Bayesian-updating approach are compared with two conventional methods. The dissolved oxygen reserve based on a conventional margin of safety of 20% is estimated to be 45,682.26 kg/Day. The second conventional method, where we consider the standard deviation of 1.88 mg/L, produces a dissolved oxygen reserve of 40,516.09 kg/Day. The Bayesian approach yields the dissolved oxygen reserve of 38,614.43 kg/Day with the first level (μ-σ) of MOS, producing a deficit of 5606.65 kg/Day in dissolved oxygen. The dissolved oxygen reserve deficit increases to 23,895.13 kg/Day when the second level (μ-2σ) of MOS is used, which escalated to 42,383.52 kg/Day when the highest level (μ-3σ) of MOS is used. While the total uncertainty-based Bayesian approach is demonstrated for a TMDL development on the Amite River, the overall approach could be applied in any river system with similar available data.     

Utilisation of steel slags as neutralising agents in biooxidation of a refractory gold concentrate and their influence on the subsequent cyanidation

A study on the possibilities to utilise steel slag as neutralising agent in biooxidation of a refractory gold concentrate has been done with reference to commercial grade slaked lime. The idea has been to reduce the operating costs for neutralisation in the biooxidation plant, which is known to be the second largest operating cost. Other benefits would be savings in cost for landfilling of slag, possibilities to recycle elements present in the slag and savings of virgin limestone deposits. The slags used were an EAF slag and a slag from ladle refining; both originating from Swedish scrap based steel-making. Continuous biooxidation of the refractory gold concentrate was conducted in a single-stage 5 L reactor at a retention time of 56 h. The neutralisation capacity was determined by comparing the amount needed, per ton of feed concentrate added, to maintain the desired pH of 1.5 during steady state operation. Slaked lime had the highest neutralisation capacity with 110 kg/ton feed followed by ladle slag and EAF slag with values of 152 and 267 kg/ton feed, respectively. Sulphide mineral oxidation was similar and high in all cases although the ladle slag results were slightly better. Gold recoveries after cyanide leaching on the residues obtained were also similar and were in the range of 86-89%. However, the cyanide consumption expressed as kilogram cyanide per ton of concentrate fed to biooxidation, was double in the case of ladle slag and three times as much for the EAF slag compared to the slaked lime experiment. The increased cyanide consumption could not be explained only by the increased amount of elemental sulphur obtained in the slag experiments. The elemental sulphur formed had different reactivities as seen from the thiocyanate formation and cyanide losses due to thiocyanate formation were 16%, 32% and 40% for EAF slag, slaked lime and ladle slag, respectively. It is concluded that the ladle slag could be a possible replacement for limestone if they are mixed in proper proportions so that the microbial carbon dioxide demand is met whereas the EAF slag is less suitable due to the very fine reaction products obtained which gave operational problems with filtration and washing. To come further, experiments with the normal multi-stage biooxidation set-up with total retention time of 120 h should be performed which would increase the sulphur oxidation and eventually also reduce the cyanide consumption.     

Loss of crop yields in India due to surface ozone: an estimation based on a network of observations

Surface ozone is mainly produced by photochemical reactions involving various anthropogenic pollutants, whose emissions are increasing rapidly in India due to fast-growing anthropogenic activities. This study estimates the losses of wheat and rice crop yields using surface ozone observations from a group of 17 sites, for the first time, covering different parts of India. We used the mean ozone for 7 h during the day (M7) and accumulated ozone over a threshold of 40 ppbv (AOT40) metrics for the calculation of crop losses for the northern, eastern, western and southern regions of India. Our estimates show the highest annual loss of wheat (about 9 million ton) in the northern India, one of the most polluted regions in India, and that of rice (about 2.6 million ton) in the eastern region. The total all India annual loss of 4.0–14.2 million ton (4.2–15.0%) for wheat and 0.3–6.7 million ton (0.3–6.3%) for rice are estimated. The results show lower crop loss for rice than that of wheat mainly due to lower surface ozone levels during the cropping season after the Indian summer monsoon. These estimates based on a network of observation sites show lower losses than earlier estimates based on limited observations and much lower losses compared to global model estimates. However, these losses are slightly higher compared to a regional model estimate. Further, the results show large differences in the loss rates of both the two crops using the M7 and AOT40 metrics. This study also confirms that AOT40 cannot be fit with a linear relation over the Indian region and suggests for the need of new metrics that are based on factors suitable for this region.