Nitrogen and plant population change radiation capture and utilization capacity of sunflower in semi-arid environment

The combination of nitrogen and plant population expresses the spatial distribution of crop plants. The spatial distribution influences canopy structure and development, radiation capture, accumulated intercepted radiation (Sa), radiation use efficiency (RUE), and subsequently dry matter production. We hypothesized that the sunflower crop at higher plant populations and nitrogen (N) rates would achieve early canopy cover, capture more radiant energy, utilize radiation energy more efficiently, and ultimately increase economic yield. To investigate the above hypothesis, we examined the influences of leaf area index (LAI) at different plant populations (83,333, 66,666, and 55,555 plants ha^?1) and N rates (90, 120, and 150 kg ha^?1) on radiation interception (Fi), photosynthetically active radiation (PAR) accumulation (Sa), total dry matter (TDM), achene yield (AY), and RUE of sunflower. The experimental work was conducted during 2012 and 2013 on sandy loam soil in Punjab, Pakistan. The sunflower crop captured more than 96% of incident radiant energy (mean of all treatments), 98% with a higher plant population (83,333 plants ha^?1), and 97% with higher N application (150 kg ha^?1) at the fifth harvest (60 days after sowing) during both study years. The plant population of 83,333 plants ha^?1 with 150 kg N ha^?1 ominously promoted crop, RUE, and finally productivity of sunflower (AY and TDM). Sunflower canopy (LAI) showed a very close and strong association with Fi (R ² = 0.99 in both years), PAR (R ² = 0.74 and 0.79 in 2012 and 2013, respectively), TDM (R ² = 0.97 in 2012 and 0.91 in 2013), AY (R ² = 0.95 in both years), RUE for TDM (RUE_TDM) (R ² = 0.63 and 0.71 in 2012 and 2013, respectively), and RUE for AY (RUE_AY) (R ² = 0.88 and 0.87 in 2012 and 2013, respectively). Similarly, AY (R ² = 0.73 in 2012 and 0.79 in 2013) and TDM (R ² = 0.75 in 2012 and 0.84 in 2013) indicated significant dependence on PAR accumulation of sunflower. High temperature during the flowering stage in 2013 shortened the crop maturity duration, which reduced the LAI, leaf area duration (LAD), crop growth rate (CGR), TDM, AY, Fi, Sa, and RUE of sunflower. Our results clearly revealed that RUE was enhanced as plant population and N application rates were increased and biomass assimilation in semi-arid environments varied with radiation capture capacity of sunflower.     

Coffee,its roasted form,and their residues cause birth failure and shorten lifespan in dengue vectors

Environmental Science and Pollution Research - In dengue mosquitoes, successful embryonic development and long lifespan are key determinants for the persistence of both virus and vector. Therefore,...     

Techno-economic assessment of municipal solid waste management in Jordan

Mismanagement of solid waste leads to public health risks, adverse environmental impacts and other socio-economic problems. This is obvious in many developing countries around the world. Currently, several countries have realized that the way they manage their solid wastes does not satisfy the objectives of sustainable development. Therefore, these countries, including Jordan, which forms the case study presented here, have decided to move away from traditional solid waste management (SWM) options to more integrated solid waste management approaches. Unfortunately, in many developing countries like Jordan, the lack of adequate resources to implement the necessary changes is posing a serious obstacle. The present paper discusses the various practices and challenges of solid waste management in Jordan from both a technical and economic perspective. An overview of the current practices and their environmental implications in three major cities of the country, which generate more than 70% of the country's solid waste, is presented. Recent literature on solid waste management in Jordan has been reviewed; and data on the total amount of municipal solid waste generated, compositional variations over the last two decades, and future projections are presented. The necessity, importance and needs of solid waste recovery and reuse are identified. The review of the legal frameworks indicated that there is a need for detailed and clear regulations dealing specifically with solid waste. The service cost analysis revealed that none of the municipalities in Jordan sufficiently recover the cost of the services, with more than 50% being subsidized from the municipalities' budgets. The allocation of the available resources was analyzed and service performance indicators assessed. Factors that should be taken into consideration when making the decision to move from a traditional SWM approach to a more integrated approach are highlighted and suggestions for a more smooth transition are recommended.     

On–off control of aeration time in the simultaneous removal of ammonia and manganese using a biological aerated filter system

The biological aerated filter (BAF) system, a new alternative in drinking water treatment, was designed to remove NH₄⁺–N and Mn²⁺ simultaneously. This study aimed to control the aeration time in the BAF system for simultaneous NH₄⁺–N and Mn²⁺ removal to achieve the Malaysian effluent quality regulation for drinking water. The experiment was conducted under four strategies of S1, S2, S3 and S4. The results demonstrated that acceptable levels of NH₄⁺–N and Mn²⁺ were achieved over a 6 h aeration period (S1), producing effluent concentrations of 0.7 mg/L (93.2% removal) and 0.08 mg/L (79.6% removal), respectively. At the initial treatment of S1 and S2, the dissolved oxygen (DO) level rapidly increased until it reached a saturated concentration (6.8 mg/L DO) after 2 h period. Automatic on–off aeration time to maintain 3 mg/L DO set point (S4) resulted with a good effluent quality of NH₄⁺–N and Mn²⁺ compared with the 2 mg/L DO set point (S3) which did not meet the regulated standard limits. Through the automatic on–off aeration time, the saturated and excessive DO levels in the BAF system can be avoided consequently reduce the wastage of energy and electrical consumption for simultaneous NH₄⁺–N and Mn²⁺ removal from drinking water treatment.     

Municipal solid waste management in Malaysia: Practices and challenges

Rapid economic development and population growth, inadequate infrastructure and expertise, and land scarcity make the management of municipal solid waste become one of Malaysia’s most critical environmental issues. The study is aimed at evaluating the generation, characteristics, and management of solid waste in Malaysia based on published information. In general, the per capita generation rate is about 0.5–0.8 kg/person/day in which domestic waste is the primary source. Currently, solid waste is managed by the Ministry of Housing and Local Government, with the participation of the private sector. A new institutional and legislation framework has been structured with the objectives to establish a holistic, integrated, and cost-effective solid waste management system, with an emphasis on environmental protection and public health. Therefore, the hierarchy of solid waste management has given the highest priority to source reduction through 3R, intermediate treatment and final disposal.     

Poly(Acrylic Acid) Grafted Sodium Alginate Di-Block Hydrogels as Efficient Biosorbents; Structure-Property Relevance

Naturally-based poly(acrylic acid) grafted sodium alginate di-block hydrogels were investigated as high efficiency biosorbents for copper(II) ion. The grafted di-block hydrogel was characterized using FTIR, TGA and SEM techniques. Blank and immobilized algal biosorbent beads formed via 2.0% (w/w) calcium ions were also investigated. Batch adsorption experiments revealed optimal pH dependence of copper(II) ion biosorption at pH 5.5 with high efficient copper(II) ion uptake of 98.5 mg/g. The dynamics studies showed that the high efficiency copper(II) ion biosorption followed pseudo-second order kinetics with significant contribution of intraparticle diffusion mechanism. The equilibrium data fitted to Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) adsorption isotherm models. Thermodynamics parameters for copper(II) biosorption on blank and immobilized algal beads depicted the spontaneous nature of the biosorption process. Such high efficiency, feasibility, simplicity, and low cost properties adapt the di-block biosorbent to be the next generation promising biosorbents for water decontamination and to help in the recovery of the missing ecologic harmony.     

Epoxidised Natural Rubber Filled Spent Coffee Ground Green Biocomposites

Journal of Polymers and the Environment - This study investigates the influence of spent coffee (SC), and potassium hydroxide (KOH) modified spent coffee (ACT-SC) as fillers on the mechanical and...     

Intertidal macroinvertebrate community structure in a subtropical channel is driven by sediment properties across different land-use types

Environmental Science and Pollution Research - Macroinvertebrate community in the intertidal setup plays an important role in coastal ecosystem functions and biogeochemical cycle. However,...     

Evaluation of municipal solid waste composting kinetics

Most modern municipal solid waste (MSW) composting operations have emphasized the enhancement of decomposition of the organic fraction of the waste to comply with strict environmental regulations. This can be achieved once the composting process kinetics are well understood. This study examined process kinetics through experimentation with bench-scale reactors under controlled composting conditions to show the interdependence between biological, chemical and physical factors during composting of MSW. The effects of temperature, moisture content, waste particle size and carbon to nitrogen (C/N) ratio on process kinetics were evaluated. The results obtained revealed that these factors should be carefully controlled in order to achieve optimum process performance. It has been found that the organic matter degradation during composting follows a first-order kinetic model.     

Stochastic modeling and optimization of medical waste collection in Northern Jordan

Jordan has witnessed a rapid increase in healthcare facilities during the last two decades. As a consequence, the amount of generated medical waste have been increased rapidly and a proper management system is indeed needed to eliminate the environmental and health hazards resulted from such waste. An approved medical waste treatment facility is the incinerator located at the northern region of Jordan which serves the four northern governorates. Two trucks are used to pickup waste from the hospitals in these governorates to be treated at the incinerator. In this paper, a route scheduling model is proposed to minimize the total travel distance which in turn minimizes transportation cost and reduces emissions. The proposed model takes into account the capacity of trucks, number of visits per week, timing between visits along with the service level required by the hospitals. An optimal routing schedule was found and verified. Compared to current routing schedule, a saving of 102 km per week was achieved.