Response curves of seventeen woody species to soil factors along a riparian forest in northern Iran

The aim of this study was to determine type of response curves for seventeen woody species (10 tree and 7 shrub species) to soil factors in an intact riparian forest in Safaroud River in northern Iran using HOF function. Data were collected along transects established perpendicular to the water flow on both sides of the river. Results indicated different responses for different woody species. The most common were symmetricunimodal response curves and curves showing an increase in occurrence probability after a certain value in form of a plateau. Bimodal curves were four times more frequent in riverside than forest interior area. It seems that river flow disturbances through frequent floods effect on species tolerance and optimum in riversides.     

Characterization of exhaust particles from military vehicles fueled with diesel,gasoline, and JP-8

Diluted exhaust from selected military aircraft ground-support equipment (AGE) was analyzed for particulate mass, elemental carbon (EC) and organic carbon (OC), SO4(2-), and size distributions. The experiments occurred at idle and load conditions and utilized a chassis dynamometer. The selected AGE vehicles operated on gasoline, diesel, and JP-8. These military vehicles exhibited concentrations, size distributions, and emission factors in the same range as those reported for nonmilitary vehicles. The diesel and JP-8 emission rates for PM ranged from 0.092 to 1.1 g/kg fuel. The EC contributed less and the OC contributed more to the particulate mass than reported in recent studies of vehicle emissions. Overall, the particle size distribution varied significantly with engine condition, with the number of accumulation mode particles and the count median diameter (CMD) increasing as engine load increased. The SO4(2-) analyses showed that the distribution of SO4(2-) mass mirrored the distribution of particle mass.     

Natural radioactivity and dose assessment for phosphate rocks from Wadi El-Mashash and El-Mahamid Mines, Egypt

The activity concentrations of (226)Ra, (232)Th and (40)K have been measured by gamma spectroscopy (sodium iodide NaI(Tl) detector) in phosphate rock samples, collected from the Wadi El-Mashash, a site located in the central eastern desert, and El-Mahamid in the Nile valley, Egypt. The average activity concentrations of (226)Ra, (232)Th and (40)K (Bq kg(-1)) in phosphate rocks were 665.8+/-33.4, 329.4+/-17 and 587.6+/-29.4 for Wadi El-Mashash and 566.8+/-28.6, 217.3+/-11.8 and 560.1+/-28 for El-Mahamid, respectively. The corresponding values for shale rocks were 85.2+/-5.7, 93.3+/-5.6 and 303.1+/-15.2 Bq kg(-1), respectively. As a measure of radiation hazard to the occupational workers and public, the Ra equivalent activities, representative level index and dose rates due to natural radionuclides at 1 m above the ground surface were estimated. The calculated external gamma-radiation dose received by the workers of the phosphate mine are 538 and 418 microSv/y, which is far below the permitted dose of 20 mSv/y recommended by the International Commission of Radiation Protection [ICRP-60, 1990. Radiation Protection: 1990 Recommendation of the International Commission on Radiological Protection, Oxford, Pergamon Preis.] for workers.     

A new practical approach to risk management for underground mining project in Quebec

The mining industry worldwide is currently experiencing an economic boom that is contributing to economic recovery and social progress in many countries. For this to continue, the mining industry must meet several challenges associated with the start-up of new projects. In a highly complex and uncertain environment, rigorous management of risks remains indispensable in order to repel threats to the success of mining.In this article, a new practical approach to risk management in mining projects is presented. This approach is based on a novel concept called “hazard concentration” and on the multi-criteria analysis method known as the Analytic Hierarchy Process (AHP). The aim of the study is to extend the use of this approach to goldmines throughout Quebec. The work is part of a larger research project of which the aim is to propose a method suitable for managing practically all risks inherent in mining projects.This study shows the importance of taking occupational health and safety (OHS) into account in all operational activities of the mine. All project risks identified by the team can be evaluated. An adaptable database cataloguing about 250 potential hazards in an underground goldmine was constructed. In spite of limitations, the results obtained in this study are potentially applicable throughout the Quebec mining sector.     

Report: Combustion Byproducts and Their Health Effects: Summary of the 10th International Congress

The 10th International Congress on Combustion Byproducts and their Health Effects was held in Ischia, Italy, from June 17-20, 2007. It is sponsored by the US NIEHS, NSF, Coalition for Responsible Waste Incineration (CRWI), and Electric Power Research Institute (EPRI). The congress focused on: the origin, characterization, and health impacts of combustion-generated fine and ultrafine particles; emissions of mercury and dioxins, and the development/application of novel analytical/diagnostic tools. The consensus of the discussion was that particle-associated organics, metals, and persistent free radicals (PFRs) produced by combustion sources are the likely source of the observed health impacts of airborne PM rather than simple physical irritation of the particles. Ultrafine particle-induced oxidative stress is a likely progenitor of the observed health impacts, but important biological and chemical details and possible catalytic cycles remain unresolved. Other key conclusions were: (1) In urban settings, 70% of airborne fine particles are a result of combustion emissions and 50% are due to primary emissions from combustion sources, (2) In addition to soot, combustion produces one, possibly two, classes of nanoparticles with mean diameters of?~10?nm and?~1?nm. (3) The most common metrics used to describe particle toxicity, viz. surface area, sulfate concentration, total carbon, and organic carbon, cannot fully explain observed health impacts, (4) Metals contained in combustion-generated ultrafine and fine particles mediate formation of toxic air pollutants such as PCDD/F and PFRs. (5) The combination of metal-containing nanoparticles, organic carbon compounds, and PFRs can lead to a cycle generating oxidative stress in exposed organisms.     

Application of eggshell waste for the immobilization of cadmium and lead in a contaminated soil

Liming materials have been used to immobilize heavy metals in contaminated soils. However, no studies have evaluated the use of eggshell waste as a source of calcium carbonate (CaCO?) to immobilize both cadmium (Cd) and lead (Pb) in soils. This study was conducted to evaluate the effectiveness of eggshell waste on the immobilization of Cd and Pb and to determine the metal availability following various single extraction techniques. Incubation experiments were conducted by mixing 0-5% powdered eggshell waste and curing the soil (1,246 mg Pb kg?1 soil and 17 mg Cd kg?1 soil) for 30 days. Five extractants, 0.01 M calcium chloride (CaCl?), 1 M CaCl?, 0.1 M hydrochloric acid (HCl), 0.43 M acetic acid (CH?COOH), and 0.05 M ethylendiaminetetraacetic acid (EDTA), were used to determine the extractability of Cd and Pb following treatments with CaCO? and eggshell waste. Generally, the extractability of Cd and Pb in the soils decreased in response to treatments with CaCO? and eggshell waste, regardless of extractant. Using CaCl? extraction, the lowest Cd concentration was achieved upon both CaCO? and eggshell waste treatments, while the lowest Pb concentration was observed using HCl extraction. The highest amount of immobilized Cd and Pb was extracted by CH?COOH or EDTA in soils treated with CaCO? and eggshell waste, indicating that remobilization of Cd and Pb may occur under acidic conditions. Based on the findings obtained, eggshell waste can be used as an alternative to CaCO? for the immobilization of heavy metals in soils.     

Optimising of Scenedesmus sp. biomass production in chicken slaughterhouse wastewater using response surface methodology and potential utilisation as fish feeds

Production of Scenedesmus sp. biomass in chicken slaughterhouse wastewater (CSWW) is a promising alternative technique for commercial culture medium due to the high nutritional content of the generated biomass to be used as fish feeds. The current work deals with optimising of biomass production in CSWW using response surface methodology (RSM) as a function of two independent variables, namely temperature (10–30 °C) and photoperiod (6–24 h). The potential application of biomass yield as fish feeds was evaluated based on carbohydrate, protein and lipid contents. The results revealed that the best operating parameters for Scenedesmus sp. biomass production with high contents of carbohydrates, proteins and lipids were determined at 30 °C and after 24 h. The actual and predicted values were 2.47 vs. 3.09 g, 1.44 vs. 1.27 μg/mL, 29.9 vs. 31.60% and 25.75 vs. 28.44%, respectively. Moreover, the produced biomass has a high concentration of fatty acid methyl ester (FAME) as follows: 35.91% of C15:1; 17.58% of C24:1 and 14.11% of C18:1N9T. The biomass yields have 7.98% of eicosapentaenoic acid (EPA, C20:5N3) which is more appropriate as fish feeds. The Fourier transform infrared (FTIR) analysis of biomass revealed that the main functional groups included hydroxyl (OH), aldehyde (=C–H), alkanes and acyl chain groups. Scanning electron micrograph (SEM) and energy-dispersive X-ray spectroscopic analysis (EDS) indicated that the surface morphology and element distribution in biomass produced in BBM and CSWW were varied. The findings have indicated that the biomass produced in CSWW has high potential as fish feeds.

     

Takakura composting method for food wastes from small and medium industries with indigenous compost

Environmental Science and Pollution Research - The current work aimed to study the physical, chemical and biological properties of food wastes generated from small and medium industries by using...     

Effect of using limestone fines on the chemical shrinkage of pastes and mortars

Environmental Science and Pollution Research - The main aim of this study is to examine the effect of incorporating limestone fine (LF) on chemical shrinkage of pastes and mortars. For this...