Regional Monitoring of Ambient Air Carbon Monoxide in Fairbanks,Alaska

A method employing the timed fill of Mylar bags was used to obtain average carbon monoxide concentration values for ten locations in the Fairbanks, Alaska, area. The method is shown to be accurate, reliable, and inexpensive. The correlation coefficient between the bag sampling method and a continuous carbon monoxide analyzer was 0.945; correlation of carbon monoxide data from several locations to a reference in downtown Fairbanks showed a general decrease with distance from the reference analyzer. Analysis of data from Fairbanks shows that carbon monoxide concentrations during the winter months may have to be reduced 50-75% to achieve the State and National Ambient Air Quality Standards; the high levels of carbon monoxide are the result of emissions from automobile traffic during periods of severe inversion in the Fairbanks basin.     

A Simple Method of Calculating Dispersion from Urban Area Sources

A simple but physically realistic model is shown to be adequate for estimating pollutant concentrations due to area sources in cities. In this model, the surface concentration is directly proportional to the local area source strength and inversely proportional to the wind speed. The model performs nearly as well as much more complex models that require the use of digital computers.     

Effect on water resources from upstream water diversion in the Ganges basin

Bangladesh faces at least 30 upstream water diversion constructions of which Farakka Barrage is the major one. The effects of Farakka Barrage on water resources, socioeconomy, and culture have been investigated downstream in the basins of the Ganges and its distributaries. A diversion of up to 60% of the Ganges water over 25 yr has caused (i) reduction of water in surface water resources, (ii) increased dependence on ground water, (iii) destruction of the breeding and raising grounds for 109 species of Gangetic fishes and other aquatic species and amphibians, (iv) increased malnutrition, (v) deficiency in soil organic matter content, (vi) change in the agricultural practices, (vii) eradication of inland navigable routes, (viii) outbreak of waterborne diseases, (ix) loss of professions, and (x) obstruction to religious observances and pastimes. Further, arsenopyrites buried in the prebarrage water table have come in contact with air and formed water-soluble compounds of arsenic. Inadequate recharging of ground water hinders the natural cleansing of arsenic, and threatens about 75,000,000 lives who are likely to use water contaminated with up to 2 mg/L of arsenic. Furthermore, the depletion of surface water resources has caused environmental heating and cooling effects. Apart from these effects, sudden releases of water by the barrage during the flood season cause devestating floods. In consideration of such a heavy toll for the areas downstream, strict international rules have to be laid down to preserve the riparian ecosystems.     

Fetal hypothyroidism as a complication of amiodarone treatment for persistent fetal supraventricular tachycardia

We present a case of persistent fetal supraventricular tachycardia where transplacental and direct fetal treatment with amiodarone caused an iatrogenic hypothyroidism. This condition was successfully managed with the intra-amniotic instillation of 250 μg of L-thyroxine weekly, for 3 weeks. A male infant was delivered at 32 weeks by Caesarean section. The neonatal electrocardiogram showed Wolf-Parkinson-White (WPW) syndrome, which was controlled by digoxin alone. Thyroid function normalized quickly and the baby is developing normally.     

Ozone and other air quality-related variables affecting visibility in the southeast United States

An analysis of ozone (O3) concentrations and several other air quality-related variables was performed to elucidate their relationship with visibility at five urban and semi-urban locations in the southeast United States during the summer seasons of 1980-1996. The role and impact of O3 on aerosols was investigated to ascertain a relationship with visibility. Regional trend analysis over the 1980s reveals an increase in maximum O3 concentration coupled with a decrease in visibility. However, a similar analysis for the 1990s shows a leveling-off of both O3 and visibility; in both cases, the results were not statistically significant at the 5% level. A case study of site-specific trends at Nashville, TN, followed similar trends. To better understand the relationships between O3 concentration and visibility, the analysis was varied from yearly through daily to hourly averaged values. This increased temporal resolution showed a statistically significant inverse relationship between visibility and O3. Site-specific hourly r2 values ranged from 0.02 to 0.43. Additionally, by performing back-trajectory analysis, it was found that the visibility degraded by air mass migration over polluted areas.     

The interaction of heavy metals with urban soils: sorption behaviour of Cd, Cu, Cr, Pb and Zn with a typical mixed brownfield deposit

This study investigated the sorption characteristics and release of selected heavy metals (Cd, Cu, Cr, Pb and Zn) from a typical urban soil material from a derelict brownfield site in Western Scotland, UK. The study aimed to evaluate contaminant interactions with an urban substrate, comprising a mix of mineral soil and residue materials (e.g. brick, concrete, wood). This type of material has received little consideration in the literature to date. Soil samples were subject to a sequence of test involving batch equilibration and dynamic leaching, in single (non-competitive) and multi-element (competitive) solutions. The batch experiments were carried out in unadjusted and close to soil field pH conditions (pH 2 and 7, respectively). The equilibrium adsorption capacity for heavy metals was measured and extrapolated using the Langmuir isotherm. The parameters of the isotherms x(m) (the maximum amount adsorbed per unit mass of adsorbent (mg/g)) and b (adsorption constant (m(3)/g)) were calculated for Cd, Cu, Cr, Pb as single-element and multi-element solutions. The adsorption from the single-element solution was more effective than adsorption under multi-element conditions, due to competitive effects. For example, the adsorption of copper from a single-element solution was over four times greater than for a multi-element solution. In the case of Cr and Zn, migration of metal from soil to solution was observed. Adsorption capacity at pH 2 followed the order Cr>Cu>Pb>Cd and at pH 7 Cd>Zn, with precipitation affecting Cu and Pb behaviour. During the column leaching experiment, most of the heavy metals were irreversibly bound to the soil, but in the case of Cr some movement from soil into solution was observed. The results also showed that Cd, Cu, Pb and Zn were removed from the solution and adsorbed on the soil. No significant difference in the metal removal from single- and multi-element solutions was observed. Overall, the urban residue behaved in a similar manner to mineral soils despite a significant component of anthropogenic solid materials.     

Functional Properties of Extruded Starch Acetate Blends

Starch acetate, with degree of substitution of 2, was blended with 0, 7.5 and 15% polylactic acid (PLA), Eastar Bio Copolyester 14766 (EBC) or Mater-Bi ZF03U (MBI) and 10%, 13%, or 16% (d.b.) ethanol and twin-screw extruded at 160°C barrel temperature. Physical characteristics of the extrudates, such as radial expansion ratio, unit and bulk densities, and of the mechanical properties, including unit spring index and bulk spring index, were measured. Type of polymer, polymer content, and ethanol content significantly affected the physical characteristics and mechanical properties. The sample extruded with 7.5% PLA and 13% ethanol had the highest expansion ratio and bulk spring index. The sample with 15% MBI and 16% ethanol had the lowest unit density, while the sample with 7.5% PLA and 16% ethanol had lowest bulk denisty. The highest unit spring index was expressed in the sample containing 7.5% PLA and 10% ethanol.