Functional Properties of Extruded Starch Acetate Blends

Starch acetate, with degree of substitution of 2, was blended with 0, 7.5 and 15% polylactic acid (PLA), Eastar Bio Copolyester 14766 (EBC) or Mater-Bi ZF03U (MBI) and 10%, 13%, or 16% (d.b.) ethanol and twin-screw extruded at 160°C barrel temperature. Physical characteristics of the extrudates, such as radial expansion ratio, unit and bulk densities, and of the mechanical properties, including unit spring index and bulk spring index, were measured. Type of polymer, polymer content, and ethanol content significantly affected the physical characteristics and mechanical properties. The sample extruded with 7.5% PLA and 13% ethanol had the highest expansion ratio and bulk spring index. The sample with 15% MBI and 16% ethanol had the lowest unit density, while the sample with 7.5% PLA and 16% ethanol had lowest bulk denisty. The highest unit spring index was expressed in the sample containing 7.5% PLA and 10% ethanol.     

Bayesian methods for analyzing movements in heterogeneous landscapes from mark-recapture data

Spatially referenced mark-recapture data are becoming increasingly available, but the analysis of such data has remained difficult for a variety of reasons. One of the fundamental problems is that it is difficult to disentangle inherent movement behavior from sampling artifacts. For example, in a typical study design, short distances are sampled more frequently than long distances. Here we present a modeling-based alternative that combines a diffusion-based process model with an observation model to infer the inherent movement behavior of the species from the data. The movement model is based on classifying the landscape into a number of habitat types, and assuming habitat-specific diffusion and mortality parameters, and habitat selection at edges between the habitat types. As the problem is computationally highly intensive, we provide software that implements adaptive Bayesian methods for effective sampling of the posterior distribution. We illustrate the modeling framework by analyzing individual mark-recapture data on the Glanville fritillary butterfly (Melitaea cinxia), and by comparing our results with earlier ones derived from the same data using a purely statistical approach. We use simulated data to perform an analysis of statistical power, examining how accuracy in parameter estimates depends on the amount of data and on the study design. Obtaining precise estimates for movement rates and habitat preferences turns out to be especially challenging, as these parameters can be highly correlated in the posterior density. We show that the parameter estimates can be considerably improved by alternative study designs, such as releasing some of the individuals into the unsuitable matrix, or spending part of the recapture effort in the matrix.     

Spatial and temporal variability in urban fine particulate matter concentrations

Identification of hot spots for urban fine particulate matter (PM(2.5)) concentrations is complicated by the significant contributions from regional atmospheric transport and the dependence of spatial and temporal variability on averaging time. We focus on PM(2.5) patterns in New York City, which includes significant local sources, street canyons, and upwind contributions to concentrations. A literature synthesis demonstrates that long-term (e.g., one-year) average PM(2.5) concentrations at a small number of widely-distributed monitoring sites would not show substantial variability, whereas short-term (e.g., 1-h) average measurements with high spatial density would show significant variability. Statistical analyses of ambient monitoring data as a function of wind speed and direction reinforce the significance of regional transport but show evidence of local contributions. We conclude that current monitor siting may not adequately capture PM(2.5) variability in an urban area, especially in a mega-city, reinforcing the necessity of dispersion modeling and methods for analyzing high-resolution monitoring observations.     

Mapping uncertainties in the future provision of ecosystem services in a mountain region in Switzerland

Regional Environmental Change - Ecosystem services (ES) management has to cope with a high degree of uncertainty related to changes in socio-economic and climatic conditions as well as in societal...     

Removal of PCBs in contaminated soils by means of chemical reduction and advanced oxidation processes

Although the chemical reduction and advanced oxidation processes have been widely used individually, very few studies have assessed the combined reduction/oxidation approach for soil remediation. In the present study, experiments were performed in spiked sand and historically contaminated soil by using four synthetic nanoparticles (Fe⁰, Fe/Ni, Fe₃O₄, Fe_3???x Ni _x O₄). These nanoparticles were tested firstly for reductive transformation of polychlorinated biphenyls (PCBs) and then employed as catalysts to promote chemical oxidation reactions (H₂O₂ or persulfate). Obtained results indicated that bimetallic nanoparticles Fe/Ni showed the highest efficiency in reduction of PCB28 and PCB118 in spiked sand (97 and 79 %, respectively), whereas magnetite (Fe₃O₄) exhibited a high catalytic stability during the combined reduction/oxidation approach. In chemical oxidation, persulfate showed higher PCB degradation extent than hydrogen peroxide. As expected, the degradation efficiency was found to be limited in historically contaminated soil, where only Fe⁰ and Fe/Ni particles exhibited reductive capability towards PCBs (13 and 18 %). In oxidation step, the highest degradation extents were obtained in presence of Fe⁰ and Fe/Ni (18–19 %). The increase in particle and oxidant doses improved the efficiency of treatment, but overall degradation extents did not exceed 30 %, suggesting that only a small part of PCBs in soil was available for reaction with catalyst and/or oxidant. The use of organic solvent or cyclodextrin to improve the PCB availability in soil did not enhance degradation efficiency, underscoring the strong impact of soil matrix. Moreover, a better PCB degradation was observed in sand spiked with extractable organic matter separated from contaminated soil. In contrast to fractions with higher particle size (250–500 and <500 μm), no PCB degradation was observed in the finest fraction (≤250 μm) having higher organic matter content. These findings may have important practical implications to promote successively reduction and oxidation reactions in soils and understand the impact of soil properties on remediation performance.     

A comparative study of trace metals in male and female Caspian kutum (<Emphasis Type="Italic">Rutilus frisii kutum</Emphasis>) from the southern basin of Caspian Sea

This study focuses on the extent of zinc (Zn), copper (Cu), cadmium (Cd), cobalt (Co), manganese (Mn), lead (Pb), mercury (Hg), and arsenic (As) bioaccumulation in edible muscles of Caspian kutum (Rutilus frisii kutum), in both male and female sexes at Noor and Babolsar coastal regions from the southern basin of Caspian Sea. These values were compared with the WHO and the UNFAO safety standards regarding the amount of the abovementioned heavy metals in fish tissues (mg/kg ww). Results showed that the accumulation of these elements (except for Zn) was not significantly different between sexes of male and female in Babolsar coastal regions (P?>?0.05). In the other hand, accumulation of Hg and As at edible muscles of Caspian kutum has significant difference between two sexes of male and female in Noor coastal regions (P?<?0.05), the female had higher concentration than the male. Furthermore, it was not significantly correlated with sex and rivers in length and weight of fish (R ²?<?0.50; P?>?0.05). Based on the results, the concentration of heavy metals in the studied fish tissues proved to be significantly lower than international standards (P?<?0.05), so its consumption is not a threat to the health of consumers.     

Linking fine-scale sub-arctic vegetation distribution in complex topography with surface-air-temperature modelled at 50-m resolution

Recent studies have shown that the complexities of the surface features in mountainous terrain require a re-assessment of climate impacts at the local level. We explored the importance of surface-air-temperature based on a recently published 50-m-gridded dataset, versus soil variables for explaining vegetation distribution in Swedish Lapland using generalised linear models (GLMs). The results demonstrated that the current distribution of the birch forest and snowbed community strongly relied on the surface-air-temperature. However, temperature alone is a poor predictor of many plant communities (wetland, meadow). Because of diminishing sample representation with increasing altitude, the snowbed community was under-sampled at higher altitudes. This results in underestimation of the current distribution of the snowbed community around the mountain summits. The analysis suggests that caution is warranted when applying GLMs at the local level.     

Monitoring of atrazine in milk using a rapid tube-based ELISA and validation with HPLC

Although atrazine has been banned in the European Union since 2007 it still persists in soil from where it can enter the food chain. Milk-producing animals accumulate atrazine from contaminated feed and water and since large quantities of milk and milk products are consumed its quality should be constantly monitored. The objective of this investigation was to develop a simple tube ELISA procedure suitable for use in non-specialised laboratories and in the field. A polyclonal antibody raised in sheep and the hapten-gelatine conjugate was immobilised onto polystyrene tubes. This enables the colour produced to be read on a basic spectrophotometer. Milk samples were collected from three farms in different regions of Poland and diluted before immunoassay was performed. Samples were extracted with hexane-acetone for HPLC analysis. The amount of fat in the milk samples interferes with the dose response so it essential that the standards are prepared in the same samples matrix. A good correlation between 1% and 2% was found between the two methods in the analysis of real samples. However the ELISA procedure was more sensitive that the HPLC method since atrazine was detected in some samples by the ELISA but was not confirmed by the HPLC method. The study demonstrated that the simple antigen-coated tube assay provides a cost effective and valuable screening test that can be easily modified for direct use as a screening tool in the field.     

CFD model simulation of dispersion from chlorine railcar releases in industrial and urban areas

To assist in emergency response decisions and planning in case of releases of pressurized liquefied chlorine from railroad tank cars in industrial sites and cities, the FLACS Computational Fluid Dynamics (CFD) model has been used to simulate the transport and dispersion of the dense chlorine cloud. Two accident locations are studied: an actual railcar accident at an industrial site in Festus, MO, and a hypothetical railcar accident at a rail junction in the Chicago urban area. The results show that transport of a large dense gas release at ground level in an industrial site or large city could initially extend a hundred meters or more in the upwind and crosswind directions. The dense cloud may follow terrain drainage, such as river channels. Near the source, the obstacles tend to slow down the dense gas cloud and may constrain it and cause increased concentrations. Farther downwind, the obstacles may cause enhanced mixing and dilution once the cloud has grown larger. In some cases, significant amounts of cloud mass may become “trapped” in obstacle wakes for many minutes after the main cloud has passed. Although the CFD model can account for the details of the flow and dispersion much better than standard widely-used simple dense gas models, many similarities are found among the various models in their simulated variations with downwind distance of the maximum cloud centerline concentration.     

A Template for Integrated Community Sustainability Planning

This article describes a template for implementing an integrated community sustainability plan. The template emphasizes community engagement and outlines the components of a basic framework for integrating ecological, social and economic dynamics into a community plan. The framework is a series of steps that support a sustainable community development process. While it reflects the Canadian experience, the tools and techniques have applied value for a range of environmental planning contexts around the world. The research is case study based and draws from a diverse range of communities representing many types of infrastructure, demographics and ecological and geographical contexts. A critical path for moving local governments to sustainable community development is the creation and implementation of integrated planning approaches. To be effective and to be implemented, a requisite shift to sustainability requires active community engagement processes, political will, and a commitment to political and administrative accountability, and measurement.