Role of NADH-dependent chromium reductases,exopolysaccharides and antioxidants by Paenibacillus thiaminolyticus PS 5 against damage induced by reactive oxygen species

ABSTRACT

Cr (VI) being used in various activities of industries and its improper treatment lead to contamination of environment. Among different methods, biological is the most efficient method to control pollution from soils affected with metals. Present study was designed to assess the role of Paenibacillus thiaminolyticus PS5 for adsorption, Cr (VI) reduction and mechanism of reduction. Sorption of chromium (VI) by strain PS5 was obtained by batch equilibrium method. Cr (VI) reduction in both free and immobilised cells were evaluated by 1,5-Diphenyl Carbazide method. The formation of biofilm by Paenibacillus thiaminolyticus PS5 was observed for colour change as well as quantified spectrophotometrically. Analysis kits were used to measure the amount of eDNA, superoxide and malondialdehyde (MDA). Metal resistant strain PS5 was characterised as P. thiaminolyticus using 16S rRNA gene sequence. Maximum biosorption of Cr (VI) by strain PS5 was found at pH 6–8 and 100–400 µgCr/mL within 24 hours of incubation. Complete reduction of Cr (VI) by strain PS5 was achieved at pH 6–8 and100–300 µg/mL Cr (VI). Paenibacillus thiaminolyticus PS5 immmobilisation on sodium alginate and polyvinyl alcohol facilitated complete reduction of Cr (VI) within 18 hours due to the formation of more biofilm under metal stress conditions. Strain PS5 reduced almost all Cr (VI) into Cr (III) in supernatant, most of which was immobilised by cell debris. Experiments confirmed the reduction of Cr (VI) by cytosolic cell-free extracts which is a mechanism of detoxification. The release of exopolysaccharides and antioxidants by strain PS5 played a protective role against cell damage by Cr (VI) as Cr (VI) could not release the significant amount of eDNA, superoxide and MDA. The present study proved strain PS5 to be a super bioinoculant which has great capacity for adsorption, biotransformation and can activate cytosolic reductases, exopolysaccharides and antioxidants against oxidative damage.     

Variations in breeding success and daily nest survival of Whiskered Tern (<Emphasis Type="Italic">Chlidonias hybrida</Emphasis>) at two Iranian colonies

Variations in breeding success of the Whiskered Terns (Chlidonias hybrida) were studied in two wetlands; Anzali (2005 and 2008) and Zarivar (2007–2008) in north and west Iran. Nesting success was modeled and compared using information-theoretic approach implemented in program Mark in order to assess effects of colony locations, years and nest initiation dates on the probability of daily nest survival. Clutch size did not vary between colonies and years. Breeding success varied between colonies (Zarivar > Anzali), and years only in Anzali (2005 > 2008). Overall daily nest survival was 0.977. (95% LCI 0.973, UCI 0.981), equivalent to a Mayfield nest survival of 0.317. (95% LCI 0.255, UCI 0.387). Egg-laying periods and colony site were important covariates affecting the daily survival rates (Σω _i = 0.86 and Σω _i = 0.83, respectively), while, the support for the effect of year was less (Σω _i = 0.41). We concluded that Lake Zarivar provides a more favorable nesting location for Whiskered Terns probably because of little changes in rainfall and water depth during the breeding seasons which influence breeding performance.     

Performance evaluation of an anaerobic/aerobic landfill-based digester using yard waste for energy and compost production

The objective of this study was to evaluate a new alternative for yard waste management by constructing, operating and monitoring a landfill-based two-stage batch digester (anaerobic/aerobic) with the recovery of energy and compost. The system was initially operated under anaerobic conditions for 366 days, after which the yard waste was aerated for an additional 191 days. Off gas generated from the aerobic stage was treated by biofilters. Net energy recovery was 84.3MWh, or 46kWh per million metric tons of wet waste (as received), and the biochemical methane potential of the treated waste decreased by 83% during the two-stage operation. The average removal efficiencies of volatile organic compounds and non-methane organic compounds in the biofilters were 96-99% and 68-99%, respectively.     

Greenbelt conservation as a component of ecosystem,ecological benefits and management services: evidence from Peshawar City,Pakistan

Environment, Development and Sustainability - Conservation of greenbelts is the most enduringly successful and popular basic need for today to protect green land, preserve ecological landscape and...     

Hydrous ferric oxide nanoparticles hosted porous polyethersulfone adsorptive membrane: chromium (VI) adsorptive studies and its applicability for water/wastewater treatment

In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0–1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m² h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.

     

Improving suspended sediment measurements by automatic samplers

Suspended solids either as total suspended solids (TSS) or suspended sediment concentration (SSC) is an integral particulate water quality parameter that is important in assessing particle-bound contaminants. At present, nearly all stormwater runoff quality monitoring is performed with automatic samplers in which the sampling intake is typically installed at the bottom of a storm sewer or channel. This method of sampling often results in a less accurate measurement of suspended sediment and associated pollutants due to the vertical variation in particle concentration caused by particle settling. In this study, the inaccuracies associated with sampling by conventional intakes for automatic samplers have been verified by testing with known suspended sediment concentrations and known particle sizes ranging from approximately 20 μm to 355 μm under various flow rates. Experimental results show that, for samples collected at a typical automatic sampler intake position, the ratio of sampled to feed suspended sediment concentration is up to 6600% without an intake strainer and up to 300% with a strainer. When the sampling intake is modified with multiple sampling tubes and fitted with a wing to provide lift (winged arm sampler intake), the accuracy of sampling improves substantially. With this modification, the differences between sampled and feed suspended sediment concentration were more consistent and the sampled to feed concentration ratio was accurate to within 10% for particle sizes up to 250 μm.     

Integration and evaluation of a power plant with a CaO-based CO2 capture system

This paper explores the integration and evaluation of a power plant with a CaO-based CO₂ capture system. There is a great amount of recoverable heat in the CaO-based CO₂ capture process. Five cases for the possible integration of a 600 MW power plant with CaO-based CO₂ capture process are considered in this paper. When the system is configured so that recovered heat is used to replace part of the boiler heat load (Case 2), modelling not only shows that this is the system recovering the most heat of 1008.8 MW but also results in the system with the lowest net power output of 446 MW and the second lowest of efficiency of 34.1%. It is indicated that system performance depends both on the amount of heat recovery and the type of heat utilization. When the system is configured so that a 400 MW power plant is built using the recovered heat (Case 4), modelling shows that this is the system with the most net power output of 846 MW, the highest efficiency of 36.8%, the lowest cost of electricity of 54.3 €/MWh and the lowest cost of CO₂ avoided of 28.9 €/tCO₂. This new built steam cycle will not affect the operation of the reference plant which vents its CO₂ to the atmosphere, highly reducing the connection between the CO₂ capture process and the reference plant which vents its CO₂ to the atmosphere. The average cost of electricity and the cost of CO₂ avoided of the five cases are about 58.9 €/kWh and 35.9 €/tCO₂, respectively.     

Catalytic evaluation of promoted CeO2-ZrO2 by transition, alkali, and alkaline-earth metal oxides for diesel soot oxidation

Series of mixed metal oxides were synthesized by gel-combustion method and their catalytic activities for soot oxidation were investigated. The catalysts were M-Ce-Zr （M = Mn, Cu, Fe, K, Ba, Sr）, and χK-20Mn-Ce-Zr （χ= 0, 5, 10, 20）, they were characterized by XRD, SEM, TPR and BET surface area techniques. The results of soot temperature programmed oxidation （TPO） in an O2 oxidizing atmosphere indicate that K-Ce-Zr has the highest catalytic activity for soot oxidation under loose contact condition, due to enhancement of the soot and catalyst contacts. On the other hand, under a tight contact condition, Mn-Ce-Zr and Cu-Ce-Zr nano-composites have high activities for soot oxidation and lower the soot TPO peak temperatures by about 280 and 270℃, respectively, as compared to non-catalytic soot oxidation. Furthermore, the addition of up to 10 wt.% potassium oxides into Mn-Ce-Zr increases its catalytic activity and further reduces the soot TPO peak temperature by about 40℃ under loose contact condition.     

Sustainability of winter tourism in a changing climate over Kashmir Himalaya

Mountain areas are sensitive to climate change. Implications of climate change can be seen in less snow, receding glaciers, increasing temperatures, and decreasing precipitation. Climate change is also a severe threat to snow-related winter sports such as skiing, snowboarding, and cross-country skiing. The change in climate will put further pressure on the sensitive environment of high mountains. Therefore, in this study, an attempt has been made to know the impact of climate change on the snow precipitation, water resources, and winter tourism in the two famous tourist resorts of the Kashmir Valley. Our findings show that winters are getting prolonged with little snow falls on account of climate change. The average minimum and maximum temperatures are showing statistically significant increasing trends for winter months. The precipitation is showing decreasing trends in both the regions. A considerable area in these regions remains under the snow and glacier cover throughout the year especially during the winter and spring seasons. However, time series analysis of LandSat MODIS images using Normalized Difference Snow Index shows a decreasing trend in snow cover in both the regions from past few years. Similarly, the stream discharge, comprising predominantly of snow- and glacier-melt, is showing a statistically significant declining trend despite the melting of these glaciers. The predicted futuristic trends of temperature from Predicting Regional Climates for Impact Studies regional climate model are showing an increase which may enhance snow-melting in the near future posing a serious threat to the sustainability of winter tourism in the region. Hence, it becomes essential to monitor the changes in temperature and snow cover depletion in these basins in order to evaluate their effect on the winter tourism and water resources in the region.     

Fluoride distribution and the effect of some ions along Alexandria coastal Mediterranean seawater of Egypt

The coastal seawater of Mediterranean of Alexandria receives large amount of discharged waters containing industrial wastes, sewage, and agricultural and domestic drainage. Fluoride and some parameters were( chemical and physical) determined. The data gave indication that the content and the amount of the discharged water largely affect the chemical composition of the coastal water. Stepwise regression analysis was highly significant and the model was very fruitful, where the observed and calculated values were mostly concordant. This may indicated that there was a relation between fluoride content in cosslal seawater and its content in the discharged water.