Study on gas diffusion emitted from different height of point source

The flow and dispersion of stack-gas emitted from different elevated point source around flow obstacles in an urban environment have been investigated, using computational fluid dynamics models (CFD). The results were compared with the experimental results obtained from the diffusion wind tunnel under different conditions of thermal stability (stable, neutral or unstable). The flow and dispersion fields in the boundary layer in an urban environment were examined with different flow obstacles. Gaseous pollutant was discharged in the simulated boundary layer over the flat area. The CFD models used for the simulation were based on the steady-state Reynolds-Average Navier-Stoke equations (RANS) with kappa-epsilon turbulence models; standard kappa-epsilon and RNG kappa-epsilon models. The flow and dispersion data measured in the wind tunnel experiments were compared with the results of the CFD models in order to evaluate the prediction accuracy of the pollutant dispersion. The results of the CFD models showed good agreement with the results of the wind tunnel experiments. The results indicate that the turbulent velocity is reduced by the obstacles models. The maximum dispersion appears around the wake region of the obstacles.     

Seasonal variation of oxidative stress biomarkers in clams Ruditapes decussatus sampled from Tunisian coastal areas

Seven (7) sites from to the Tunisian coastal area were monitored through four seasons using several oxidative stress biomarkers including lipid peroxidation. Catalase (CAT) specific activity was determined in clam Ruditapes decussatus digestive gland. Lipid peroxidation was assessed in the same tissues using malondialdehyde (MDA) concentration, neutral lipid (NL) and lipofuscin accumulation. Results show that catalase specific activity varies between sites and fluctuates in time. The highest CAT activities were recorded in sites from Bizerta Lagoon and sites neighbouring Sfax city. Malondialdehyde accumulation in digestive gland cells seems to be very pronounced in animals sampled in summer and autumn. Digestive gland sections of clams sampled from reported heavy metal polluted sites exhibited higher volume density of residual bodies. Our results showed that the neutral lipids and lipofuscin content in clam's digestive gland are more sensitive to general stress as compared to other biomarkers, and could be used successfully in clams as early warning tools in field biomonitoring programs.     

Heavy metal and polycyclic aromatic hydrocarbons in Ebrié lagoon sediments, Côte d’Ivoire

Surface sediments throughout Ebrié lagoon, Côte d’Ivoire were collected in 2001 and analyzed for their heavy metal and polycyclic aromatic hydrocarbons (PAH) contaminant content. Geochemical maps of heavy metals (Cd, Cu, Zn, Fe, and Mn) in the surface sediment were produced based on geographical information system (GIS) technology. Heavy metals and PAH were detected at high concentration and provide evidence for several anthropogenic inputs to the lagoon. A significant spatial relationship was found for Fe, Zn, and Cu in the sediment using a GIS-based analysis, suggesting that these metal contaminants in the sediments of the Biétri bay had common sources.     

Atmospheric deposition of major and trace elements in Amman, Jordan

Wet and dry deposition samples were collected in the capital of Jordan, Amman. Concentrations of Al, Ba, Bi, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, V, Zn, Fe, Sr, Mg²⁺, Ca²⁺, Na⁺, K⁺, Cl⁻, NO₃ ⁻ and SO₄ ²⁻, along with pH were determined in collected samples. Mean trace metal concentrations were similar or less than those reported for other urban regions worldwide, while concentrations of Ca²⁺ and SO₄ ²⁻ were among the highest. High Ca²⁺ concentrations were attributed to the calcareous nature of the local soil and to the influence of the Saharan dust. However, high SO₄ ²⁻ concentrations were attributed to the influence of both anthropogenic and natural sources. Except for Cl⁻, NO₃ ⁻, SO₄ ²⁻ and Cu, monthly dry deposition fluxes of all measured species were higher than wet deposition fluxes. The annual wet deposition fluxes of trace metals were much lower than those reported for other urban areas worldwide.     

Environmental and socio-economic impacts of pipe drainage in Pakistan

Many drainage schemes and salinity control projects have been executed world wide. Pipe drainage has widely been used in Pakistan, Egypt and India to control waterlogging. The impact of pipe drainage on land and water was evaluated in this paper using data of three pipe drainage projects in Pakistan namely Khushab Salinity Control and Reclamation Project, Fourth Drainage Project in Faisalabad and Swabi Salinity Control and Reclamation Project. Data by regular monitoring of these projects were collected. The effect of pipe drainage on water table depth at these three locations has been compared. Water quality and soil salinity improvement due to the pipe drainage has also been investigated. Data, related to water table depths and discharges from drain pipes/wells, was collected. Observation wells, installed at various places by the Water and Power Development Authority, were used for collection of this data. To evaluate the impact of the projects on salinity, soil samples from all the three locations were tested. A questionnaire was prepared to get the view of the people about the projects. It was revealed that in these areas, due to subsurface pipe drainage, the percentage of the abandoned land has been considerably decreased. Over drainage was observed in a few places of the projects. The farmers at such places were asked to change their cropping patterns. Ultimately, there has been an increase in area under cultivation, crop yields and cropping intensity in the projects’ area.     

Assessment of radiological hazard of NORM in Margalla Hills limestone, Pakistan

Studies on naturally occurring radioactive material (NORM) in the limestone from the Margalla Hills have been carried out by measuring gamma activity and to access its radiological implications if any. For data acquisition, a High-Purity Germanium detector was employed. The activity concentrations of (226)Ra, (232)Th, and (40)K were found to be 14.32?±?0.24, 2.05?±?0.04, and 13.80?±?0.20 Bq kg(-1), respectively. These values are relatively lower as compared to that in the limestone of other countries and much lower than the values reported for the natural building stones. The average specific activities due to (226)Ra were found to be higher when compared with (40)K and (232)Th. Indices of radium equivalent activity (Ra(eq)), internal hazard (H(in)), indoor absorbed gamma dose rate (D(R,)), and corresponding annual effective dose (E(eff)) were also determined for the limestone-made rooms. All of these indices were found to be in the lower ranges. The Margalla Hills limestone does not pose any excessive radiological health hazard as a building material and in industrial uses for a common man.     

Integrating geospatial and ground geophysical information as guidelines for groundwater potential zones in hard rock terrains of south India

The increasing demand of water has brought tremendous pressure on groundwater resources in the regions were groundwater is prime source of water. The objective of this study was to explore groundwater potential zones in Maheshwaram watershed of Andhra Pradesh, India with semi-arid climatic condition and hard rock granitic terrain. GIS-based modelling was used to integrate remote sensing and geophysical data to delineate groundwater potential zones. In the present study, Indian Remote Sensing RESOURCESAT-1, Linear Imaging Self-Scanner (LISS-4) digital data, ASTER digital elevation model and vertical electrical sounding data along with other data sets were analysed to generate various thematic maps, viz., geomorphology, land use/land cover, geology, lineament density, soil, drainage density, slope, aquifer resistivity and aquifer thickness. Based on this integrated approach, the groundwater availability in the watershed was classified into four categories, viz. very good, good, moderate and poor. The results reveal that the modelling assessment method proposed in this study is an effective tool for deciphering groundwater potential zones for proper planning and management of groundwater resources in diverse hydrogeological terrains.     

Influence of multi-industrial activities on trace metal contamination: an approach towards surface water body in the vicinity of Dhaka Export Processing Zone (DEPZ)

Industrial wastewater discharged into aquatic ecosystems either directly or because of inadequate treatment of process water can increase the concentrations of pollutants such as toxic metals and others, and subsequently deteriorate water quality, environmental ecology and human health in the Dhaka Export Processing Zone (DEPZ), the largest industrial belt of 6-EPZ in Bangladesh. Therefore, in order to monitor the contamination levels, this study collected water samples from composite effluent points inside DEPZ and the surrounding surface water body connected to effluent disposal sites and determined the environmental hazards by chemical analysis and statistical approach. The water samples were analysed by inductively coupled plasma mass spectrometry to determine 12 trace metals such as As, Ag, Cr, Co, Cu, Li, Ni, Pb, Se, Sr, V and Zn in order to assess the influence of multi-industrial activities on metal concentrations. The composite effluents and surface waters from lagoons were characterized by a strong colour and high concentrations of biochemical oxygen demand, chemical oxygen demand, electrical conductivity, pH, total alkalinity, total hardness, total organic carbon, Turb., Cl(-), total suspended solids and total dissolved solids, which were above the limit of Bangladesh industrial effluent standards, but dissolved oxygen concentration was lower than the standard value. The measurement of skewness and kurtosis values showed asymmetric and abnormal distribution of the elements in the respective phases. The mean trend of variation was found in a decreasing order: Zn > Cu > Sr > Pb > Ni > Cr > Li > Co > V > Se > As > Ag in composite industrial effluents and Zn > Cu > Sr > Pb > Ni > Cr > Li > V > As > Ag > Co > Se in surface waters near the DEPZ. The strong correlations between effluent and surface water metal contents indicate that industrial wastewaters discharged from DEPZ have a strong influence on the contamination of the surrounding water bodies by toxic metals. The average contamination factors were reported to be 0.70-96.57 and 2.85-1,462 for industrial effluents and surface waters, respectively. The results reveal that the surface water in the area is highly contaminated with very high concentrations of some heavy/toxic metals like Zn, Pb, Cu, Ni and Cr; their average contamination factors are 1,460, 860, 136, 74.71 and 4.9, respectively. The concentrations of the metals in effluent and surface water were much higher than the permissible limits for drinking water and the world average concentrations in surface water. Therefore, the discharged effluent and surface water may create health hazards especially for people working and living inside and in the surrounding area of DEPZ.     

Transformation of nitrogen dioxide into ozone and prediction of ozone concentrations using multiple linear regression techniques

Analysis and forecasting of air quality parameters are important topics of atmospheric and environmental research today due to the health impact caused by air pollution. This study examines transformation of nitrogen dioxide (NO₂) into ozone (O₃) at urban environment using time series plot. Data on the concentration of environmental pollutants and meteorological variables were employed to predict the concentration of O₃ in the atmosphere. Possibility of employing multiple linear regression models as a tool for prediction of O₃ concentration was tested. Results indicated that the presence of NO₂ and sunshine influence the concentration of O₃ in Malaysia. The influence of the previous hour ozone on the next hour concentrations was also demonstrated.     

Abundances, distribution, and sources of trace metals in Nakaumi–Honjo coastal lagoon sediments, Japan

Bottom sediments from Nakaumi Lagoon and the Honjo Area in southwest Japan were analyzed to determine their geochemical compositions and to assess potential impacts by comparison with sediment quality guidelines. Present-day water quality was also assessed. Results showed that the water quality of Nakaumi Lagoon and the Honjo area contrasts between their upper and lower parts. Average abundances of As, Pb, Zn, Cu, Ni, and Cr in the Nakaumi sediments were 12, 25, 135, 32, 21, and 46 ppm, respectively, compared to 10, 24, 110, 26, 20, and 38 ppm in the Honjo area. All averages are greater than those of the upper continental crust. The elevated metal concentrations are probably related to the fine-grained nature of the sediments, reducing bottom conditions produced by abundant organic matter and possibly minor non-point anthropogenic sources. Trace metal contents are strongly correlated with Fe₂O₃, suggesting that Fe oxides play a role in controlling abundances. Metal concentrations exceed the NYSDEC lowest effect level and CCME interim sediment quality guidelines that indicate moderate impact on aquatic organisms. Average abundances of As and Zn are comparable to the Coastal Ocean Sediment Database threshold, whereas maximum concentrations exceed that value, indicating that the concentrations of these metals are potentially toxic. These enrichments suggest that regular monitoring may be desirable even where no point sources of metal pollution exist.