Development of a Natural Chewing Gum from Plant Based Polymer

In this study, Kenger gum obtained from Kenger plant (Gundelia tournefortii) was used in the production of biodegradable and edible chewing gum. Kenger gum was able to be softened by thermal process to improve its textural properties. 80% methanolic extract of gum showed 195.6 gallic acid equivalents (GAE) mg/100 g gum antioxidant activity and 17.9 mm inhibition zone for Escherichia coli O157:H7 as an antimicrobial activity. Softened Kenger gum was also characterized by texture properties, scanning electron microscope (SEM) images and chemical compositions. Hardness value of gum decreased from 864 to 238 g which was comparable to commercial chewing gums. Softened Kenger gum was observed to be a perfect substitute for a synthetic gum base in the production of a conventional chewing gum. Moreover, resilience value was remarkably found to be the best standard parameter to select chewing gums with desired textural properties.     

Seasonal Variability of Heavy Metals in Surface Sediment of Lake Sapanca, Turkey

Lake Sapanca is exposed to heavy urbanization and industrialization because of its natural beauty and its proximity to the metropolitan İstanbul, Turkey. In this study, it was aimed to investigate seasonal changes of some heavy metals (Pb, Cr, Cu, Mn, Ni, Zn and Cd) concentration of surface sediment. Nine different stations were chosen as sampling points. Samples were taken every three months and the seasonal and annual average concentration of the elements were determined. Seasonal highest values of heavy metals were observed as follows; Cr, Cu, Mn, Ni and Zn in Summer, Cd in Autumn. There was no seasonal difference for Pb, Cr and Cd. It seems that Lake Sapanca has not been polluted yet. However, it was found that Cu and Ni concentrations in surface sediment exceed lowest effect level.     

An investigation of heavy metal and migration through groundwater from the landfill area of Eskisehir in Turkey

This paper was conducted in order to determine the groundwater and soil pollution within and around the landfill of Eskisehir, Turkey. In this paper, mud, leachate and groundwater samples were collected seasonally a year from near Eskisehir landfill-site to investigate the possible impact of leachate which affects soil and groundwater quality. Concentrations of various heavy metals (Fe, Cu, Zn, Mn, Co, Pb, Cr, Ni and Mo) were determined in mud, leachate and groundwater samples. In addition, the heavy metal transportation infiltrated from landfill through a porous medium into the groundwater was modelled in order to determine the potential groundwater pollution caused by the leachate of the landfill. The modelling of the contaminant transportation was carried out by using a multiflow computer programme which simulates the distribution of heavy metal concentrations. As a result of this study, the distribution of the contaminant concentration was modelled and determined with respect to time and distance. Hence, the contaminant concentrations were determined at any time interval according to distance. The heavy metal contamination in groundwater does not affect the wells found at far points from the source in a short time, e.g. 10, 20 and 30 days according to the obtained experimental results. When the time intervals extended more than 1 year, heavy metal concentrations decrease with distance but the concentration of the contamination increases when it gets closer to the pollution source. In this study, the potential contamination of groundwater was effectively estimated.     

Prenatal diagnosis of Joubert syndrome: a case report

Joubert syndrome is a rare, autosomal recessive condition, first described by Joubert in 1969. We present a case of Joubert syndrome from a consanguineous family in which, apart from the cerebellar vermis agenesis, ventriculomegaly, bilateral postaxial polydactyly of hands and right foot and micropenis, episodes of fetal breathing pattern with an increased respiratory rate were also demonstrated by prenatal ultrasound scan. At birth the infant showed an odd face and bilateral fleshy nodules of the tongue. He had an abnormal breathing pattern of alternating tachypnea and apnea. Cranial MRI showed molar tooth sign, hydrocephalus and Dandy–Walker malformation. He had nystagmus, and electroretinography showed retinal dystrophy. Copyright © 2002 John Wiley & Sons, Ltd.     

Re-usage of waste foundry sand in high-strength concrete

In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and the elasticity modulus which is directly related to waste foundry inclusion in concrete. Nevertheless the concrete with 10% waste foundry sand exhibits almost similar results to that of the control one. The slump and the workability of the fresh concrete decreases with the increase of the waste foundry sand ratio. Although the freezing and thawing significantly reduces the mechanical and physical properties of the concrete. The obtained results satisfies the acceptable limits set by the American Concrete Institute (ACI).     

Response of groundwater to climate variation: fluctuations of groundwater level and well yields in the Halacli aquifer (Cankiri, Turkey)

The aim of this study was to investigate the response of groundwater level and well yields in the Halacli aquifer to climate variations in Central Anatolia, Turkey. The Halacli aquifer is a typical aquifer due to its vulnerability to the climate variations. The aquifer is shallow and its recharge area is small. The waters from rains and snow melts can rapidly infiltrate down to the groundwater body because the vadose zone is thin and formed from coarse material. Therefore, the groundwater system responds to the short-term recharges by raising its level. Although any exploitation did not occur, the groundwater levels have declined from 1989 to 1997. However, the groundwater levels began rising when the exploitation started in the summer of 1998. After the year 2000, although the amount and duration of yearly exploitation was constant, fluctuations of water level continued. Fluctuation of groundwater levels and well yields bewilders the water users and imperils the sustainable water management in the study area and also in arid and semi-arid regions of Turkey. In order to overcome this problem, behavior of groundwater level and discharges of the wells must be recorded and the water users must be informed about the current conditions and the possible trend in the future of the system.     

Pyrolysis of the tetra pak

This study deals with pyrolysis of tetra pak which is widely used as an aseptic beverage packaging material. Pyrolysis experiments were carried out under inert atmosphere in a batch reactor at different temperatures and by different pyrolysis modes (one- and two-step). The yields of char, liquid and gas were quantified. Pyrolysis liquids produced were collected as three separate phases; aqueous phase, tar and polyethylene wax. Characterization of wax and the determination of the total amount of phenols in aqueous phase were performed. Chemical compositions of gas and char products relevant to fuel applications were determined. Pure aluminum can be also recovered by pyrolysis.     

Investigation of Synthesis of Copolymers from the Waste Products of Industrial Oil Refinement having Adhesion Properties and Strength to the Thermal Destruction

In this study, the waste products of industrial vegetable oil refinement were transformed into the glycidyl ester for preventing the effects of them to the environment, the ways for evaluating them in polymer chemistry were investigated, copolymers having high adhesion property and strength to the thermal destruction were synthesized and the area of their usage was determined. For this reason, the waste product of sunflower oil refination as a vegetable oil in the industry; soap stock (SS) was converted to the unsaturated glycidyl esters by the interaction with epichlorohidrine in the alkaline medium. After that the copolymerization of synthesized unsaturated glycidyl esters and the other waste product of oil refinement fatty acid (FA) with styrene in the radicalic initiator medium were investigated and copolymers that have high strength to the thermal destruction and adhesion property were synthesized. From the results of TGA and DTA analysis, it was determined that synthesized copolymers have low loss of weight at high temperature. The structures of copolymers were fixed by spectral and chemical analysis methods.