Intertidal macroinvertebrate community structure in a subtropical channel is driven by sediment properties across different land-use types

Environmental Science and Pollution Research - Macroinvertebrate community in the intertidal setup plays an important role in coastal ecosystem functions and biogeochemical cycle. However,...     

Laser cutting of alumina tiles: Heating and stress analysis

Laser cutting of alumina tiles is carried out, and the temperature and stress fields developed in the cutting section are predicted numerically using ABAQUS finite element code. The morphological changes along the cut edge surfaces are examined using the optical and scanning electron microscopes. The residual stress formed in the cutting section is obtained after incorporating the XRD technique. The residual stress predicted is compared with the experimental data. It is found that the residual stress predicted agrees well with the experimental results. The dross attachment at the kerf exit is observed, which is associated with the high melting temperature of the workpiece.     

Stimulating student’s pro-environmental behavior in higher education institutions: an ability–motivation–opportunity perspective

Environment, Development and Sustainability - The slow and inadequate environmental performance of higher education institutions is attracting the consideration of researchers toward a behavioral...     

Potential of immobilized bitter gourd (Momordica charantia) peroxidases in the decolorization and removal of textile dyes from polluted wastewater and dyeing effluent

Immobilized peroxidases from Momordica charantia were highly effective in decolorizing reactive textile dyes compared to its soluble counterpart. Dye solutions, 50-200 mg/l, were treated with soluble and immobilized bitter gourd peroxidases (specific activity of 99.0 EU per mg protein). The decolorization of dyes with soluble and immobilized enzyme was maximum in the range of pH 3.0-4.0. The effect of different temperatures on the dye decolorization was monitored and it was observed that all the dyes were maximally decolorized at 40 degrees C. In order to examine the operational stability of the immobilized preparation, the enzyme was repeatedly exploited for the decolorization of the dyes from fresh batch of dye solutions. Even after 10 cycles in each case the immobilized preparation retained nearly 50% of the initial enzyme activity. The immobilized enzyme exhibited more than 90% of the original activity while the soluble enzyme lost 33% of the initial activity when stored for 40 d at room temperature. Mixtures of three, four and eight dyes were prepared and treated with soluble and immobilized bitter gourd peroxidase. Each mixture was decolorized by more than 80% when treated with immobilized enzyme. Dyeing effluent collected from local dyers was treated with both types of enzyme preparations. Immobilized enzyme was capable of removing remarkably high concentration of color from the effluent. TOC content of soluble and immobilized enzyme treated individual dyes, mixture of dyes and dyeing effluent was determined and it was observed that higher TOC was removed after treatment with immobilized enzyme.     

Field dissipation of 4-nonylphenol, 4-t-octylphenol, triclosan and bisphenol A following land application of biosolids

The persistence of contaminants entering the environment through land application of biosolids needs to be understood to assess the potential risks associated. This study used two biosolids treatments to examine the dissipation of four organic compounds: 4-nonylphenol, 4-t-octylphenol, bisphenol A and triclosan, under field conditions in South Australia. The pattern of dissipation was assessed to determine if a first-order or a biphasic model better described the data. The field dissipation data was compared to previously obtained laboratory degradation data. The concentrations of 4-nonylphenol, 4-t-octylphenol and bisphenol A decreased during the field study, whereas the concentration of triclosan showed no marked decrease. The time taken for 50% of the initial concentration of the compounds in the two biosolids to dissipate (DT50), based on a first-order model, was 257 and 248 d for 4-nonylphenol, 231 and 75 d for 4-t-octylphenol and 289 and 43 d for bisphenol A. These field DT50 values were 10- to 20-times longer for 4-nonylphenol and 4-t-octylphenol and 2.5-times longer for bisphenol A than DT50 values determined in the laboratory. A DT50 value could not be determined for triclosan as this compound showed no marked decrease in concentration. The biphasic model provided a significantly improved fit to the 4-t-octylphenol data in both biosolids treatments, however, for 4-nonylphenol and bisphenol A it only improved the fit for one treatment. This study shows that the use of laboratory experiments to predict field persistence of compounds in biosolids amended soils may greatly overestimate degradation rates and inaccurately predict patterns of dissipation.     

Development of controlled release formulations of thiram employing amphiphilic polymers and their bioefficacy evaluation in seed quality enhancement studies

Controlled release formulations of Thiram (Dimethylcarbamothioylsulfanyl-N,N-dimethylcarbamodithioate), a contact fungicide, have been prepared using laboratory synthesized poly(ethylene glycol) (PEG) based functionalized amphiphilic copolymers. The kinetics of thiram from developed controlled release (CR) formulations were studied in comparison with that of the commercially available 75 WS. Release from the commercial formulation was faster than with the developed CR formulations. Maximum amount of thiram was released on 35th day for PEG-2000 4d, 28th day for PEG-1500 4c, 21st day for PEG-1000 4b and 15th day for PEG-600 4a in comparison to commercial formulation (7th day). The diffusion exponent (n) of thiram in water ranged from 0.356 to 0.545 in the tested formulations. The half-release (t_1/2) values ranged between 14.78 to 22.1 days, and the Period of Optimum Availability (POA) of thiram ranged from 7.79 to 25.15 days. An effort has also been made to identify the suitable polymers that could reduce the seed deterioration during storage and also act as an effective carrier of fungicide thiram. The results demonstrate that the seeds coated with the different formulations deteriorated at a slower pace as manifested in high germination percentage over control. Apart from the fungicidal effect of thiram, the polymers acted as barriers to moisture reducing the rate of seed deterioration and checked the degradation of thiram. The CR formulation 4d, with PEG 2000, was found to be most effective as seed coat.     

Bioefficacy evaluation of controlled release formulations based on amphiphilic nano-polymer of carbofuran against Meloidogyne incognita infecting tomato

In the present investigation, the bioefficacy of developed carbofuran formulations, with PEG-600 (7a, CP1) & PEG-900 (7b, CP2) @ 5, 10 and 20 ppm, along with commercial formulation of carbofuran 3G (CP0) were evaluated against the root-knot nematode, Meloidogyne incognita infecting tomato (cv. Pusa Ruby) in pot and field conditions. The bioefficacy data indicated that the formulations developed by utilizing polymers having PEG – 900 (7b) as hydrophilic segment were effective even at 14 days post inoculation (dpi) as evident from shoot and root length. Also, the reduction in penetration was found to be maximum with CP2 (3.6 – 4.6 J2s) at all concentrations compared to CP1 (6.6 – 16.4 J2s) and CP0 (29.3 – 32.6 J2s). Overall, CP2 was more effective in reducing the number of nematodes up to 14 days, compared to CP1 and CP0. Both the CR formulations (CP1 and CP2) in general significantly reduced the number of galls, when compared to CP0. However, under field conditions, lower concentrations (5, and 10 ppm) of CP2, were less effective in controlling the gall formation whereas, CP2 at 20 ppm, was most effective than other treatments. The study revealed that the developed CR formulations of carbofuran have the potential for effective management of M. incognita in tomato under field conditions.     

Low cost sorbents for the removal of methyl parathion pesticide from aqueous solutions

Sorptive potential of selected agricultural waste materials i.e. rice (Oryza sativa) bran (RB), bagasse fly ash (BFA) of sugarcane (Saccharum officinarum), Moringa oleifera pods (MOP) and rice husk (RH) for the removal of methyl parathion pesticide (MP) from surface and ground waters has been investigated. Optimization of operating parameters of sorption process, i.e. sorbent dose, agitation time, pH, initial concentration of sorbate, and temperature have been studied. The sorption data fitted to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms. The maximum capacities of RB, BFA, MOP and RH for MP were calculated to be 3.6+/-0.8, 5.3+/-1.4, 5.2+/-1.5 and 4.7+/-1.0 mmolg(-1) by Freundlich, 0.39+/-0.009, 0.39+/-0.005, 0.36+/-0.004 and 0.35+/-0.008 mmolg(-1) by Langmuir and 0.9+/-0.08, 1.0+/-0.10, 1.0+/-0.10 and 0.9+/-0.07 mmolg(-1) by D-R isotherms respectively, employing 0.1g of each sorbent, at pH 6, 90 min agitation time and at 303 K. Application of first order Lagergren and Morris-Weber equations to the kinetic data yielded correlation coefficients, close to unity. Thermodynamic parameters of sorption process, i.e. DeltaH, DeltaS and DeltaG were computed and their negative values indicated the exothermic and spontaneous nature of sorption process. The pesticide may be stripped by sonication with methanol, making the regeneration and reutilization of sorbents promising. The sorbents investigated exhibited their potential applications in water decontamination, treatment of industrial and agricultural waste waters.     

Pb-induced changes in roots of two cultivated rice cultivars grown in lead-contaminated soil mediated by smoke

Environmental Science and Pollution Research - Nowadays, public concerns regarding deleterious effect of lead (Pb) is on rise due to its abundance and toxic effect on plants and other living...