Thermoplastic vulcanizates from post consumer computer plastics/nitrile rubber blends by dynamic vulcanization

Due to depletion of natural resources and increasing greenhouse emissions, new technologies for the transformation of waste polymers into valuable materials represent one of our greatest current needs. Acrylonitrile–butadiene–styrene terpolymer (ABS) is one of the most widely used engineering plastics and is used as outer casing for electronic equipment. Nitrile rubber (NBR) is used in many applications that demand oil resistance. In an attempt to explore whether these materials can be successfully recycled, we prepared blends of scrap computer plastics (SCP) based on ABS with NBR and waste NBR powder (w-NBR), and investigated their mechanical properties and recyclability. Specifically, we assessed the effect of dynamic vulcanization and replacement of virgin NBR with w-NBR on the properties of 60/40, 70/30, and 80/20 NBR/SCP blends. These blends exhibited thermoplastic elastomeric behavior. The thermoplastic elastomeric blends showed excellent swelling resistance to standard lubricant oil (namely, IRM 903 oil).     

A Composting Study of Membrane-Like Polyvinyl Alcohol Based Resins and Nanocomposites

This study presents the effect of biodegradation, in a composting medium, on properties of membrane-like crosslinked and noncrosslinked polyvinyl alcohol (PVA) and nanocomposites. The composting was carried out for 120 days and the biodegradation of these materials was characterized using various techniques. The changes in the PVA resin and nanocomposite surface topography and microstructure during composting were also characterized. The results from the analyses suggest biodegradation of PVA based materials in compost medium was mainly by enzymes secreted by fungi. The results also indicate that the enzymes degraded the amorphous regions of the specimens first and that the PVA crystallinity played an important role in its biodegradation. The surface roughness of the specimens was seen to increase with composting time as the microbial colonies grew which in turn facilitated further microorganism growth. All specimens broke into small pieces between 90 and 120 days of composting as a result of deep biodegradation. Glyoxal and malonic acid crosslinking decreased the PVA biodegradation rate slightly. Addition of highly crystalline microfibrillated cellulose and naturally occurring halloysite nanotubes in PVA based nanocomposites also decreased the biodegradation rate. The three factors: PVA crystallinity, crosslinking and additives, may be utilized effectively to extend the life of these materials in real life applications.     

Leachability of dissolved chromium in asphalt and concrete surfacing materials

Leachate metal pollutant concentrations produced from different asphalt and concrete pavement surfacing materials were measured under controlled laboratory conditions. The results showed that, in general, the concentrations of most metal pollutants were below the reporting limits. However, dissolved chromium was detected in leachate from concrete (but not asphalt) specimens and more strongly in the early-time leachate samples. As the leaching continued, the concentration of Cr decreased to below or close to the reporting limit. The source of the chromium in concrete pavement was found to be cement. The concentration of total Cr produced from leachate of different cement coming from different sources that was purchased from retail distributors ranged from 124 to 641 μg/L. This result indicates that the potential leachability of dissolved Cr from concrete pavement materials can be reduced through source control. The results also showed that the leachability of dissolved Cr in hardened pavement materials was substantially reduced. For example, the concentration of dissolved Cr measured in actual highway runoff was found to be much lower than the Cr concentration produced from leachate of both open and dense graded concrete pavement specimens under controlled laboratory study. It was concluded that pavement materials are not the source of pollutants of concern in roadway runoff; rather most pollutants in roadway surface runoff are generated from other road-use or land-use sources, or from (wet or dry) atmospheric deposition.     

Assessment and spatial distribution of groundwater quality in industrial areas of Ghaziabad, India

An attempt has been made in this study to evaluate the groundwater quality in two industrial blocks of Ghaziabad district. Groundwater samples were collected from shallow wells, deep wells and hand pumps of two heavily industrialized blocks, namely Bulandshahar road industrial area and Meerut road industrial area in Ghaziabad district for assessing their suitability for various uses. Samples were collected from 30 sites in each block before and after monsoon. They were analyzed for a total of 23 elements, namely, Ag, Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, U, V, and Zn. In addition to these elements, some other parameters were also studied viz: color, odor, turbidity, biological oxygen demand, chemical oxygen demand (COD), dissolved oxygen, total dissolved solids and total suspended solid. The water quality index was also calculated based on some of the parameters estimated. Out of the 23 elements, the mean values of 12 elements, namely, Al, As, Ca, Cd, Cr, Mg, Mn, Na, Ni, Pb, Se, and U, were higher than the prescribed standard limits. The concentrations (in milligram per liter) of highly toxic metals viz., Al, As, Cd, Cr, Ni, Pb, Se, and U, ranged from 1.33–6.30, 0.04–0.54, 0.005–0.013, 4.51–7.09, 0.14–0.27, 0.13–0.32, 0.16–2.11, and 0.10–1.21, respectively, in all groundwater samples, while the permissible limits of these elements as per WHO/BIS standards for drinking are 0.2, 0.01, 0.003, 0.05, 0.07, 0.01, 0.04, and 0.03 mg L^?1, respectively. The EC, pH, and COD in all samples varied from 0.74–4.21, 6.05–7.72, and 4.5–20.0 while their permissible limits are 0.7 dS m^?1, 6.5–8.5, and 10 mg L^?1, respectively. On the basis of the above-mentioned parameters, the water quality index of all groundwater samples ranged from 101 to 491, and 871 to 2904 with mean value of 265 and 1,174 based on two criteria, i.e., physico-chemical and metal contaminations, respectively while the prescribed safe limit for drinking is below 50. The results revealed that the groundwater in the two blocks is unfit for drinking as per WHO/BIS guidelines. The presence of elements like As, Se, and U in toxic amounts is a matter of serious concern.     

Urinary fluoride as a monitoring tool for assessing successful intervention in the provision of safe drinking water supply in five fluoride-affected villages in Dhar district, Madhya Pradesh, India

Endemic fluorosis was detected in 31 villages in the Dhar district of Madhya Pradesh, Central India. Out of the 109 drinking water sources that were analyzed, about 67 % were found to contain high concentration of fluoride above the permissible level of 1.0 mg/l. Dental fluorosis among the primary school children in the age between 8 and 15 served as primary indicator for fluoride intoxication among the children. Urinary fluoride levels among the adults were found to be correlated with drinking water fluoride in 10 villages affected by fluoride. Intervention in the form of alternate safe water supply in five villages showed significant reduction in the urinary fluoride concentration when compared to the control village. Urinary fluoride serves as an excellent marker for assessing the effectiveness of intervention program in the fluoride-affected villages.     

Influence of microbial and synthetic surfactant on the biodegradation of atrazine

The present study reports the effect of surfactants (rhamnolipids and triton X-100) on biodegradation of atrazine herbicide by strain A6, belonging to the genus Acinetobacter. The strain A6 was able to degrade nearly 80 % of the 250-ppm atrazine after 6 days of growth. The bacterium degraded atrazine by de-alkylation process. Bacterial cell surface hydrophobicity as well as atrazine solubility increased in the presence of surfactant. However, addition of surfactant to the mineral salt media reduced the rate and extent of atrazine degradation by decreasing the bioavailability of herbicide. On the contrary, addition of surfactant to atrazine-contaminated soil increased the rate and extent of biodegradation by increasing the bioavailability of herbicide. As compared to triton X-100, rhamnolipids were more efficient in enhancing microbial degradation of atrazine as a significant amount of atrazine was removed from the soil by rhamnolipids. Surfactants added for the purpose of hastening microbial degradation may have an unintended inhibitory effect on herbicide degradation depending upon contiguous condition, thus highlighting the fact that surfactant must be judiciously used in bioremediation of herbicides.     

Bioefficacy of insecticides against Leucinodes orbonalis on brinjal

Studies on bioefficacy of insecticides against brinjal shoot and fruit borer, Leucinodes orbonalis Guenee on brinjal were carried out during 2007 and 2008. The results on bioefficacy of insecticides showed that in terms of shoot infestation, emamectin benzoate (0.002%), endosulfan (0.05%), novaluron (0.01%) and lambda-cyhalothrin (0.004%) were found superior. The total number of drooping shoots was minimum (4.17) in emamectin benzoate followed by endosulfan (6.83) and novaluron (7.00), as compared to spinosad (9.17), deltamethrin (11.67) and Bacillus thuringiensis (13.17). In terms of reduction in fruit infestation, emamectin benzoate (0.002%) was highly effective followed by endosulfan (0.05%), agrospray oil T (0.2%) and spinosad (0.0024%). However, cost benefit ratio was highest in agrospray oil T (0.2%) followed by lambda-cyhalothrin (0.004%), endosulfan (0.05%) and deltamethrin (0.0028%).     

Minimizing changing climate impact on buildings using easily and economically feasible earth to air heat exchanger technique

The biggest challenge of the 21st century is to satisfy the escalating demand of energy and minimize the globally changing climate impact. Earth to air heat exchanger (EAHE) system can effectively reduce heating affects on buildings. An experimental study was carried out by designing EAHE system using low cost building materials like Bamboo (Bambuseae) and hydraform (cement and soil plaster) to reduce the energy consumption of buildings and minimize the impact of climate change. This system utilizes earth’s constant subterranean temperature for naturally heating or cooling the inlet air. This study was carried out in the North Eastern part of India. An open loop EAHE system was developed to predict the heating and cooling potential of the system. Within the system locally available bamboos were used for constructing the tunnel pipes and soil-cement mixture plaster was used to enhance the conductivity of the bamboo pipes. Soil-cement mixtures are capable of decreasing the humidity by 30 to 40 %. Majority of the North Eastern region of India, have humid climatic conditions through out the year. Experiment was performed continuously for 7 days and the result shows that irrespective to the inlet air temperature (ranges from 35 °C to 42 °C), outlet air temperature was recorded between 25 °C and 26 °C, which shows the effectiveness of the system. After a series of experimental analysis the study reveals that underground tunnel based fresh air delivery system is one of the easily feasible and economically feasible techniques which can drastically reduce the energy consumption of the buildings and help in addressing the continuously escalating demand of power and minimizing the impact of changing climatic conditions on buildings.     

Influence of real and synthetic municipal solid waste leachates on consolidation and shear strength behaviour of bentonites

Environmental Science and Pollution Research - For safe disposal of wastes in landfills, compacted bentonite is recommended as bottom liners due to their significant cation exchange (CEC) and...     

Possible maternal offloading of metals in the plasma,uterine and capsule fluid of pregnant ragged-tooth sharks (Carcharias taurus) on the east coast of South Africa

Environmental Science and Pollution Research - We studied the possible metal offloading onto the progeny of three pregnant female ragged-tooth sharks (Carcharias taurus) (C. taurus). The presences...