This article presents a review of anaerobic treatment technologies to treat slaughterhouse wastewater including its advantages and disadvantages. Physico-chemical characteristics and biochemical methane potential (BMP) of slaughterhouse wastewater are addressed. Various anaerobic treatment technologies are presented with the related operating parameters, viz., hydraulic retention time (HRT), organic loading rate (OLR), upflow velocity (Vup), and biogas yield vis-a-vis treatment efficiency in terms of chemical oxygen demand (COD). In addition, various factors that affect the anaerobic treatment of slaughterhouse wastewater such as high oil & grease (O & G) concentration in influent, inhibitors, volatile fatty acids (VFAs), and the loading rate are also addressed. The literature review indicated that the slaughterhouse wastewater can be treated effectively by employing any anaerobic treatment technologies at OLRs up to 5 kg COD/m3.d with more than 80% COD removal efficiency without experiencing operational problems. Anaerobic hybrid reactors (AHRs) were found the most effective among various reviewed technologies because of their ability to operate at higher OLRs (8 to 20 kg COD/m3.d) and lower HRTs (8 to 12 hrs).
Environmental Science and Pollution Research - Antimicrobial resistance (AMR) in cattle is widespread because of the increased use of antibiotics to combat microbial diseases and enhance milk... 相似文献
The biodegradability of calcium stearate (CaSt) and cobalt stearate (CoSt) filled polypropylene (PP) films were investigated in this work. The PP films were prepared using melt blending technique followed by hot press moulding. On the basis of their tensile properties, the optimum amount of pro-oxidants was taken as 0.2 phr. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used for the characterization of optimized films. Presence of pro-oxidant in the PP was confirmed by the FTIR studies. Addition of pro-oxidants in the films decreased the thermal stability as revealed by TGA analysis. Crystallinity of the pro-oxidant filled PP decreased with addition of pro-oxidants as showen by DSC. The maximum biodegradation of CaSt and CoSt containing PP films was showen 7.65 and 8.34%, respectively with 0.2 phr. Both the microbial test and plant growth test (on corn and tomato) indicated that biodegradation intermediates were non toxic. 相似文献
Protected areas have been earmarked throughout the world for the purpose of conserving the biodiversity. The protected areas are facing serious threats due to rapid urban growth, especially in the developing countries like India. The current threats and impacts of urbanization on the Okhla Bird Sanctuary (Delhi, India) have been presented in this paper as a case in point. Uncontrolled urbanization and the lack of policy implementation have been identified as one of the major contributors to incessant biodiversity loss in India and other countries. In addition, a possible management framework for a smaller protected area in an urban setting is presented in brief. 相似文献
Forest road design and construction are time-consuming and complicated because various risk factors can be encountered during the process. The aim of this study is to comprehensively assess the risk factors in forest road design and construction using the fuzzy analytic hierarchy process (AHP) method in Turkey, thus contributing to the proper performance of these activities. Within the scope of the study, six main risk factors and 22 sub-risk factors were identified based on literature review. In order to determine the weights of the relevant risk factors, the opinions of three different groups [(group 1: academicians), (group 2: forest engineers (private sector employees + public sector employees)), (group 3: group 1 + group 2)] about the risk factors were obtained. Relevant risk factor weights were determined using the fuzzy AHP method. According to group 3, the most important main risk factors are technical risks and environmental risks. In addition, the most important sub-risk factors for each relevant main risk factor were incorrect road alignment, inadequate work safety in the field, insufficient capital, legal problems on the road alignment, landslide risk during road construction, and illegal logging. Differences were observed between groups 1 and 2 in the weight rankings of relevant risk factor. The results demonstrate that the fuzzy AHP method can be used effectively to assess the risks of forest road design and construction. 相似文献
Bioelectrochemical systems (BES) have been extensively studied for resource recovery from wastewater. By taking advantage of interactions between microorganisms and electrodes, BES can accomplish wastewater treatment while simultaneously recovering various resources including nutrients, energy and water (“NEW”). Despite much progress in laboratory studies, BES have not been advanced to practical applications. This paper aims to provide some subjective opinions and a concise discussion of several key challenges in BES-based resource recovery and help identify the potential application niches that may guide further technological development. In addition to further increasing recovery efficiency, it is also important to have more focus on the applications of the recovered resources such as how to use the harvested electricity and gaseous energy and how to separate the recovered nutrients in an energy-efficient way. A change in mindset for energy performance of BES is necessary to understand overall energy production and consumption. Scaling up BES can go through laboratory scale, transitional scale, and then pilot scale. Using functions as driving forces for BES research and development will better guide the investment of efforts.
Water availability in arid regions is both sporadic and highly variable in quantity. If the water quality shows large variations
of salinity and concentration of other chemical constituents with depth and time span, it has considerable effect on the entire
hydrological set up of the area. In the Saidabad tahsil area, the deep aquifers that supply water to borewells in the alluvial
plain of the Mathura region, Uttar Pradesh, have higher salinity than those of the dugwells from the shallow aquifers. The
excessive drilling of tubewells and high yield tubewells are resulting in deterioration of water quality of the shallow aquifers.
On the contrary, the chemical constituents such as, Na+, K+, Cl-, andHCO3- show higher concentration in shallow aquifers than deep aquifers. A study carried out to monitor water quality in this region
reveals that the groundwater quality varies with depth and time span in shallow and deep aquifers. Factors controlling variations
in salinity and concentration of chemical constituents of the water in the two types of aquifers are discussed. The relative
merits of the shallow water for potability are pointed out with respect to salinity concentrations and public health. 相似文献
Supervised field trials were conducted at four different agro-climatic locations of India to evaluate the dissipation pattern and risk assessment of spiromesifen on tomato. Spiromesifen 240 SC was sprayed on tomato at 150 and 300 g a.i.?ha?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10 and 15 days after treatment and soil at 15 days after treatment. Quantification of residues was done on gas chromatograph–mass spectrophotometer in selective ion monitoring mode in the mass range of 271–274 (m/z). The limit of quantification of the method was found to be 0.05 mg kg?1, while the limit of determination was 0.015 mg kg?1. Residues were found below the LOQ of 0.05 mg kg?1 in 10 days at both the doses of application at all the locations. Spiromesifen dissipated with a half-life of 0.93–1.38 days at the recommended rate of application and 1.04–1.34 days at the double the rate of application. Residues of spiromesifen in soil were detectable level (<0.05 mg kg?1) after 15 days of treatment. A preharvest interval (PHI) of 1 day has been recommended on tomato on the basis of data generated under All India Network Project on Pesticide Residues. Spiromesifen 240 SC has been registered for its use on tomato by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of spiromesifen on tomato has been fixed by Food Safety Standard Authority of India, Ministry of Health and Family Welfare, Government of India as 0.3 μg/g after its risk assessment. 相似文献
This study investigated dioxins and dioxin-like polychlorinated biphenyls in gasses emitted from waste incinerators and thermal processes in central and western parts of India. The concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/DFs) ranged from 0.0070 to 26.8140 ng toxicity equivalent (TEQ)/Nm3, and those of dioxin-like polychlorinated biphenyls (PCBs) ranged from 0.0001?×?10?1 to 0.0295 ng TEQ/Nm3. The characteristics of mean PCDD/F I-TEQ concentration and congener profiles were studied over all the samples of air. In particular, a pattern consisting of a low proportion of dioxin-like PCBs and high proportion of PCDDs/DFs was common for all the samples from incinerators and high-temperature processes. 相似文献