Fast response measurements of the dispersion of nanoparticles in a vehicle wake and a street canyon

The distributions of nanoparticles (below 300 nm in diameter) change rapidly after emission from the tail pipe of a moving vehicle due to the influence of transformation processes. Information on this time scale is important for modelling of nanoparticle dispersion but is unknown because the sampling frequencies of available instruments are unable to capture these rapid processes. In this study, a fast response differential mobility spectrometer (Cambustion Instruments DMS500), originally designed to measure particle number distributions (PNDs) and concentrations in engine exhaust emissions, was deployed to measure particles in the 5–1000 nm size range at a sampling frequency of 10 Hz. This article presents results of two separate studies; one, measurements along the roadside in a Cambridge (UK) street canyon and, two, measurements at a fixed position (20 cm above road level), centrally, in the wake of a single moving diesel-engined car. The aims of the first measurements were to test the suitability and recommend optimum operating conditions of the DMS500 for ambient measurements. The aim of the second study was to investigate the time scale over which competing influences of dilution and transformation processes (nucleation, condensation and coagulation) affect the PNDs in the wake of a moving car. Results suggested that the effect of transformation processes was nearly complete within about 1 s after emission due to rapid dilution in the vehicle wake. Furthermore, roadside measurements in a street canyon showed that the time for traffic emissions to reach the roadside in calm wind conditions was about 45 ± 6 s. These observations suggest the hypothesis that the effects of transformation processes are generally complete by the time particles are observed at roadside and the total particle numbers can then be assumed as conserved. A corollary of this hypothesis is that complex transformation processes can be ignored when modelling the behaviour of nanoparticles in street canyons once the very near-exhaust processes are complete.     

An Approach for Evaluating the Repeatability of Rapid Wetland Assessment Methods: The Effects of Training and Experience

We sampled 92 wetlands from four different basins in the United States to quantify observer repeatability in rapid wetland condition assessment using the Delaware Rapid Assessment Protocol (DERAP). In the Inland Bays basin of Delaware, 58 wetland sites were sampled by multiple observers with varying levels of experience (novice to expert) following a thorough training workshop. In the Nanticoke (Delaware/Maryland), Cuyahoga (Ohio), and John Day (Oregon) basins, 34 wetlands were sampled by two expert teams of observers with minimal protocol training. The variance in observer to observer scoring at each site was used to calculate pooled standard deviations (SD_pool), coefficients of variation, and signal-to-noise ratios for each survey. The results showed that the experience level of the observer had little impact on the repeatability of the final rapid assessment score. Training, however, had a large impact on observer to observer repeatability. The SD_pool in the Inland Bay survey with training (2.2 points out of a 0–30 score) was about half that observed in the other three basins where observers had minimal training (SD_pool = 4.2 points). Using the results from the survey with training, we would expect that two sites assessed by different, trained observers who obtain DERAP scores differing by more than 4 points are highly likely to differ in ecological condition, and that sites with scores that differ by 2 or fewer points are within variability that can be attributed to observer differences.     

Exploring the Crowding–Satisfaction Relationship in Recreational Boating

Along with the growing boating population and the number of boats in use on limited inland waterways, boater expectations of setting density, safety perceptions, and the associated impacts on their experience (e.g., satisfaction) are becoming increasingly important. The primary purpose of this article was to explore a recreational boating crowding–satisfaction model derived from previous work using safety and enjoyment as mediating variables. We also tested our crowding–satisfaction model among day and overnight users. Our analysis revealed no significant difference between day and overnight users for any of the relationships tested in our model. Our final model indicated as respondents’ expectations for seeing people increased along with their feelings of being crowded, they were more inclined to consider the conditions on the lake as being unsafe. They were also more inclined to indicate that the number of people they had seen on the lake detracted from their boating experience. Respondents’ satisfaction was tied to their perceptions of crowding. Mediating variables illustrated that the relationship was conditioned by perceptions of safety and enjoyment. Analysis of the indirect effect observed in our study illustrate that when the number of people seen on the lake exceed respondents’ expectations, their perceptions of safety and enjoyment both decline, resulting in lower satisfaction. These findings have implications for managing recreational boating use on inland lake systems. Given the role played by expectations in our model, efforts to communicate with boaters about conditions on these waterways is important for helping them plan their boating experience and avoid situations they consider unsafe or unsatisfactory.     

Review of Russian-language studies on radionuclide behaviour in agricultural animals: part 4. Transfer to poultry

Data on radionuclide transfer to domestic chickens and ducks obtained from research performed in the former Soviet Union were reviewed to provide transfer coefficient values (Ff) to poultry and edible egg contents. The majority of the data are from experiments with ⁹⁰Sr and ¹³⁷Cs, reflecting the importance of these radionuclides after global fallout and major radiation accidents. Data for ³H, ⁵⁴Mn, ⁵⁹Fe, ⁶⁰Co, ²²Na ⁶⁵Zn, ¹³¹I and U are also given. The values derived have been compared with those in the current IAEA Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS 364) and the recent revision which incorporates the values from this paper. The Russian-language data give improved estimates for many radionuclides and the revised handbook is now based on the better quality data given for chronic administration.     

Review of Russian language studies on radionuclide behaviour in agricultural animals: 3. Transfer to muscle

Over 150 publications reporting studies conducted in the former USSR were reviewed to provide transfer coefficients (F_f) to the muscle of domestic animals from experiments using chronic administration, often for long timescales in large scale experiments. Only a few of these studies were made available in the English language literature or taken into account in international reviews. The values derived have been compared with expected values reported by the IAEA's Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS 364) where possible. The information presented here has been used in the current updating of parameters recommended for environmental assessments by the IAEA. Many of the reported values are for Sr due to the Mayak accident and Cs due to the Chernobyl accident. Nevertheless, the reported data for a wide range of radionuclides, in particular for Ru, Sb, and Zn markedly improve the extent of available data.     

Radionuclide transfer to animal products: revised recommended transfer coefficient values

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as ‘TRS 364’. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 ‘expected’ values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.     

Conversion of a Missouri River Dam and Reservoir to a Sustainable System: Sediment Management1

Abstract: A present and future challenge for water resources engineers is to extend the useful life of our dams and reservoirs. Ongoing reservoir sedimentation in impoundments must be addressed; sedimentation in many reservoirs already limits project benefits and effective project life. Sustainability requires that incoming sediment be moved downstream past the impounding dam. We use Lewis and Clark Lake, the most downstream of the six Missouri River main stem reservoirs, to demonstrate how a reservoir in advanced stages of its project life could be converted to a sustainable system with local benefits exceeding costs by a factor of 1.5. Full consideration of benefits would further enhance project justification. The proposed strategy involves four phases that will take about 50 years to complete. Cost estimates for this potential project range from the quantitative to the plausible, but it is clear that the results justify a full engineering, environmental, and economic study of this model project. If implemented, the project will create scientific knowledge and develop technologies useful for achieving sustainability at many other reservoirs in the Mississippi River basin and beyond.     

Metal-contaminated potato crops and potential human health risk in Bolivian mining highlands

This study assessed metals in irrigation water, soil and potato crops impacted by mining discharges, as well as potential human health risk in the high desert near the historic mining center of Potosí, Bolivia. Metal concentrations were compared with international concentration limit guidelines. In addition, an ingested average daily dose and minimum risk level were used to determine the hazard quotient from potato consumption for adults and children. Irrigation water maximum concentrations of Cd, Pb and Zn in mining-impacted sites were elevated 20- to 1100-fold above international concentration limit guidelines. Agricultural soils contained total metal concentrations of As, Cd, Pb and Zn that exceeded concentration limits in agricultural soil guidelines by 22-, 9-, 3- and 12-fold, respectively. Potato tubers in mining-impacted sites had maximum concentrations of As, Cd, Pb and Zn that exceeded concentration limits in commercially sold vegetables by 9-, 10-, 16- and fourfold, respectively. Using conservative assumptions, hazard quotients (HQ) for potatoes alone were elevated for As, Cd and Pb among children (range 1.1–71.8), in nearly all of the mining-impacted areas; and for As and Cd among adults (range 1.2–34.2) in nearly all of the mining-impacted areas. Only one mining-impacted area had a Pb adult HQ for potatoes above 1 for adults. Toxic trace elements in a major regional dietary staple may be a greater concern than previously appreciated. Considering the multitude of other metal exposure routes in this region, it is likely that total HQ values for these metals may be substantially higher than our estimates.     

Comparison of analytical descriptions of nocturnal low-level jets within the Ekman model framework

This study focuses on the inertial oscillation aspect of the nocturnal low-level jet (NLLJ). In the context of the Ekman model solutions, conceptual NLLJ inertial oscillation analytical frameworks proposed by Blackadar in 1957 and Shapiro and Fedorovich and van de Wiel et al. in 2010 are compared. Considering a NLLJ produced via direct numerical simulation over flat terrain with no baroclinic influence as a reference case, the deficiencies of each framework in representing a realistic NLLJ are assessed. The Blackadar theory results in unrealistic wind profiles near the surface. While extensions of Blackadar’s framework by Shapiro and Fedorovich and van de Wiel et al. produce more realistic NLLJs, the simpler approach taken by van de Wiel et al. does not describe the NLLJ wind hodograph at later times sufficiently in qualitative terms.