BTEX exposures in an area impacted by industrial and mobile sources: Source attribution and impact of averaging time

The impacts of emissions plumes from major industrial sources on black carbon (BC) and BTEX (benzene, toluene, ethyl benzene, xylene isomers) exposures in communities located >10 km from the industrial source areas were identified with a combination of stationary measurements, source identification using positive matrix factorization (PMF), and dispersion modeling. The industrial emissions create multihour plume events of BC and BTEX at the measurement sites. PMF source apportionment, along with wind patterns, indicates that the observed pollutant plumes are the result of transport of industrial emissions under conditions of low boundary layer height. PMF indicates that industrial emissions contribute >50% of outdoor exposures of BC and BTEX species at the receptor sites. Dispersion modeling of BTEX emissions from known industrial sources predicts numerous overnight plumes and overall qualitative agreement with PMF analysis, but predicts industrial impacts at the measurement sites a factor of 10 lower than PMF. Nonetheless, exposures associated with pollutant plumes occur mostly at night, when residents are expected to be home but are perhaps unaware of the elevated exposure. Averaging data samples over long times typical of public health interventions (e.g., weekly or biweekly passive sampling) misapportions the exposure, reducing the impact of industrial plumes at the expense of traffic emissions, because the longer samples cannot resolve subdaily plumes. Suggestions are made for ways for future distributed pollutant mapping or intervention studies to incorporate high time resolution tools to better understand the potential impacts of industrial plumes.

Implications: Emissions from industrial or other stationary sources can dominate air toxics exposures in communities both near the source and in downwind areas in the form of multihour plume events. Common measurement strategies that use highly aggregated samples, such as weekly or biweekly averages, are insensitive to such plume events and can lead to significant under apportionment of exposures from these sources.     

Socio-economic Impacts on Flooding: A 4000-Year History of the Yellow River, China

We analyze 4000-year flood history of the lower Yellow River and the history of agricultural development in the middle river by investigating historical writings and quantitative time series data of environmental changes in the river basin. Flood dynamics are characterized by positive feedback loops, critical thresholds of natural processes, and abrupt transitions caused by socio-economic factors. Technological and organizational innovations were dominant driving forces of the flood history. The popularization of iron plows and embankment of the lower river in the 4th century BC initiated a positive feedback loop on levee breaches. The strength of the feedback loop was enhanced by farming of coarse-sediment producing areas, steep hillslope cultivation, and a new river management paradigm, and finally pushed the flood frequency to its climax in the seventeenth century. The co-evolution of river dynamics and Chinese society is remarkable, especially farming and soil erosion in the middle river, and central authority and river management in the lower river.     

Evaluation of simplified mass transfer models to simulate the impacts of source zone architecture on nonaqueous phase liquid dissolution in heterogeneous porous media

Nonaqueous phase liquid (NAPL) dissolution was studied in three-dimensional (3D) heterogeneous experimental aquifers (25.5 cm x 9 cm x 8.5 cm) with two different longitudinal correlation lengths (2.1 cm and 1.1 cm) and initial spill volumes (22.5 ml and 10.5 ml). Spatial and temporal distributions of NAPL during dissolution were measured using magnetic resonance imaging (MRI). At high NAPL spill volume, average effluent concentrations initially increased during dissolution, as NAPL pools transitioned to NAPL ganglia, and then decreased as the total NAPL-water interfacial area decreased over time. Experimental results were used to test six dissolution models: (i and ii) a one-dimensional (1D) model using either specific NAPL-water interfacial area values estimated from MR images at each time step (i.e., 1D quasi-steady state model), or an empirical mass transfer (Sh') correlation (i.e., 1D transient model), (iii and iv) a multiple analytical source superposition technique (MASST) using either the NAPL distribution determined from MR images at each time step (i.e., MASST steady state model), or the NAPL distribution determined from mass balance calculations (i.e., MASST transient model), (v) an equilibrium streamtube model, and (vi) a 3D grid-scale pool dissolution model (PDM) with a dispersive mass flux term. The 1D quasi-steady state model and 3D PDM captured effluent concentration values most closely, including some concentration fluctuations due to changes in the extent of flow reduction. The 1D transient, MASST steady state and transient, and streamtube models all showed a monotonic decrease in effluent concentration values over time, and the streamtube model was the most computationally efficient. Changes during dissolution of the effective NAPL-water interfacial area estimated from imaging data are similar to changes in effluent concentration values. The 1D steady state model incorporates estimates of the effective NAPL-water interfacial area directly at each time point; the 3D PDM does so indirectly through mass balance and a relative permeability function, which causes reduced water flow through high saturation NAPL regions. Hence, when model accuracy is required, the results indicate that a surrogate of this effective interfacial area is required. Approaches to include this surrogate in the MASST and streamtube models are recommended.     

A Thermal Desorption Procedure for Determining Residual Blowing Agent (CFC-11) in Rigid Foam

A method for measuring the cell gas content in rigid foams has been developed. A unique foam extraction device and a thermal desorption system were developed to expedite gas extraction and analysis. CFC-11 found by this method was in excellent agreement with the calculated value in a commercially formulated foam (7.1 versus 7.8 percent). Average method precision (i.e., relative standard deviation) from processing nine foam samples (in duplicate) was 1.9 percent. The method has also been successfully applied to foams containing non-GFC blowing agents.     

LC–ICP–MS analysis of arsenic compounds in dominant seaweeds from the Thermaikos Gulf (Northern Aegean Sea,Greece)

The content of total arsenic and arsenic compounds in the dominant seaweed species in the Thermaikos Gulf, Northern Aegean Sea was determined in samples collected in different seasons. Total arsenic was determined by acid digestion followed by ICP–MS. Arsenic speciation was analyzed by water extraction followed by LC–ICP–MS. Total arsenic concentrations in the seaweeds ranged from 1.39 to 55.0 mg kg⁻¹. Cystoseira species and Codium fragile showed the highest total As contents, while Ulva species (U. intestinalis, U. rigida,U. fasciata) had the lowest Arsenosugars, the most common arsenic species in seaweeds, were found in all samples, and glycerol-arsenosugar was the most common form; however, phosphate-arsenosugar and sulfate-arsenosugar were also present. Inorganic arsenic was measured in seven algae species and detected in another. Arsenate was the most abundant species in Cystoseira barbata (27.0 mg kg⁻¹). Arsenobetaine was measured in only one sample. Methylated arsenic species were measured at very low concentrations. The information should contribute to further understanding the presence of arsenic compounds in dominant seaweeds from the Thermaikos Gulf.     

Methods to determine response factors for infrared gas imagers used as quantitative measurement devices

Response factors (RF) can be used to characterize relative sensitivity of one compound vs. another compound for the same measurement instrument. Use of RF allows the analysts/operators to calibrate the instrument with one compound and make measurement for a large number of compounds. This method is adopted for Flame Ionization Detector (FID) based survey instruments used in the Leak Detection and Repair (LDAR) practice for control of fugitive emissions of volatile organic compounds. Gas detecting Infrared (IR) cameras have been used for leak detection. However, the RF for IR cameras has not been well established despite some attempt to develop a method for IR camera RF. In addition to a method proposed earlier (Method 1), two new methods for IR camera RF are proposed in this paper: Method 2 based on theoretical approach and Method 3 based on experimental approach. All three methods are examined and compared. Both Methods 2 and 3 have shown the ability to characterize the behavior of RF for various compounds and substantially higher accuracy than Method 1. Method 2 provides a mechanism to generate RF for a large number of compounds without conducting experiments, and is recommended for implementation. The RF derived from this method can be used both in the emerging field of Quantitative Optical Gas Imaging (QOGI) and to answer the most common question that IR camera users ask—whether a particular compound can be imaged by a particular IR camera.Implications: Infrared imager is an efficient tool for detecting gas leaks from process equipment and has been used in leak detection and repair (LDAR) programs for control of fugitive emissions. However, the information regarding which chemical compounds can be imaged and how sensitive a given infrared imager is for various compounds is limited. A theoretical method is presented in this paper that can answer these questions without conducting resource-intensive experiment. The results of this theoretical method has good agreement with experimental data. The method has been used to predict relative sensitivity for 398 compounds.     

Assessment of five bioaccessibility assays for predicting the efficacy of petroleum hydrocarbon biodegradation in aged contaminated soils

In this study, the bioaccessibility of petroleum hydrocarbons in aged contaminated soils (1.6-67gkg(-1)) was assessed using four non-exhaustive extraction techniques (100% 1-butanol, 100% 1-propanol, 50% 1-propanol in water and hydroxypropyl-β-cyclodextrin) and the persulfate oxidation method. Using linear regression analysis, residual hydrocarbon concentrations following bioaccessibility assessment were compared to residual hydrocarbon concentrations following biodegradation in laboratory-scale microcosms in order to determine whether bioaccessibility assays can predict the endpoint of hydrocarbon biodegradation. The relationship between residual hydrocarbon concentrations following microcosm biodegradation and bioaccessibility assessment was linear (r(2)=0.71-0.97) indicating that bioaccessibility assays have the potential to predict the extent of hydrocarbon biodegradation. However, the slope of best fit varied depending on the hydrocarbon fractional range assessed. For the C(10)-C(14) hydrocarbon fraction, the slope of best fit ranged from 0.12 to 0.27 indicating that the non-exhaustive or persulfate oxidation methods removed 3.5-8 times more hydrocarbons than biodegradation. Conversely, for the higher molecular weight hydrocarbon fractions (C(29)-C(36) and C(37)-C(40)), biodegradation removed up to 3.3 times more hydrocarbons compared to bioaccessibility assays with the resulting slope of best fit ranging from 1.0-1.9 to 2.0-3.3 respectively. For mid-range hydrocarbons (C(15)-C(28)), a slope of approximately one was obtained indicating that C(15)-C(28) hydrocarbon removal by these bioaccessibility assays may approximate the extent of biodegradation. While this study demonstrates the potential of predicting biodegradation endpoints using bioaccessibility assays, limitations of the study include a small data set and that all soils were collected from a single site, presumably resulting from a single contamination source. Further evaluation and validation is required using soils from a range of hydrocarbon contamination sources in order to develop robust assays for predicting bioremediation endpoints in the field.     

Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg⁻¹, respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB.     

Environmental metabolites of fluoroquinolones: synthesis, fractionation and toxicological assessment of some biologically active metabolites of ciprofloxacin

Background, aim, and scope

Biowastes produced by humans and animals are routinely disposed of on land, and concern is now growing that such practices provide a pathway for fluoroquinolone (FQs) antibacterial agents and their environmental metabolites (FQEMs) to contaminate the terrestrial environment. The focus of concern is that FQs and FQEMs may accumulate in amended soils to then adversely impact on the terrestrial environment. One postulated impact is the development of a selective environment in which FQ-resistant bacteria may grow. To find evidence in support of an accumulation of antibacterial-like activity, it was first necessary to establish whether any biologically active FQEMs could be synthesized by physicochemical factors that are normally present in the environment. However, many FQEMs are not commercially available to be used as standards in such studies. FQEMs were therefore synthesized using well-defined processes. They were subsequently analyzed using spectroscopy (UV-vis) and high performance liquid chromatography with mass spectral detection. The antibacterial-like activities of fractionated FQEMs were then assessed in novel bacterial growth inhibition bioassays, and results were compared to those obtained from instrumental analyses.

Materials and Methods

Parent FQs were either exposed to sunlight or were synthesized using defined aerobic microbial (Mycobacterium gilvum or a mixed culture derived from an agricultural soil) fermentation processes. Mixtures of FQEMs derived from photo- and (intracellular) microbial processes were isolated by preparative chromatography and centrifugation techniques, respectively. Mixtures were subsequently fractionated using analytical high-performance thin layer chromatography (HPTLC), and excised analytes were tested in bioautography assays for their antibacterial-like activities. Two bacteria, Escherichia coli (E. coli) and Azospirillum brasilense (A. brasilense) were used as reporter organisms in testing FQ standards and any subtle differences between biologically active FQEMs of ciprofloxacin (CF).

Results and discussion

FQEMs produced in the photo-synthetic process had UV-vis profiles that were indistinguishable from the parent FQs, and yet mass spectral data revealed the presence of N-formylciprofloxacin (FCF). In contrast, the UV-vis profiles of FQEMs synthesized by M. gilvum and a mixed culture of microorganisms had UV-vis profiles that were similar to one another and markedly different to the parent fluoroquinolones. Mass spectral studies confirmed the presence of FCF and N-acetylciprofloxacin in both microbial ferments. In addition, a photo-FQEM (Cp 6), three M. gilvum FQEMs (Cm 5, Cm 8, and Cm 10) and a mixed culture FQEM (Cs 6) of CF and many other FQEMs of CF, norfloxacin (NF), and enrofloxacin (EF) were fractionated using HPTLC, although their identities have yet to be confirmed. Differences between bioautography results were obtained when E. coli or A. brasilense were used as reporter organisms. Parent FQs (CF and EF) and the FQEMs of CF (Cp 6, Cm 8, and Cs 6) displayed antibacterial-like activity when using E. coli as the reporter organism. In contrast, A. brasilense was insensitive to parent CF and sensitive to EF and all tested FQEMs of CF. Results are consistent with photo- and microbial processes modifying CF in different ways, with the latter changing the UV-vis chromophores. It can be inferred that a lack of detection of analytes (especially photo-FQEMs) when using UV-vis does not necessarily indicate an absence of analyte. Additionally, similarities between the UV-vis profiles of FQEMs extracted from the (monoculture) M. gilvum and the mixed culture microbial aerobic ferments are consistent with similar processes operating in both ferments. Results of HPTLC and bioautography studies revealed that mixtures of (photo- and microbial) FQEMs could be fractionated into individual components.

Conclusions

Bioactive FQEMs of ciprofloxacin, as a representative FQ, can be synthesized by photo- and microbial processes, and their detection required the use of both instrumental and bioautography analytical techniques. It is likely that such FQEMs will also be present on agricultural land that has been repeatedly amended with FQ-contaminated biosolids.

Recommendations and perspectives

The use of instrumental analytical techniques alone and especially photometric detection techniques will underestimate antibacterial-like activities of FQEMs. Moreover, the extraction technique(s) and the selected toxicological endpoint(s) require careful consideration when assessing bioactivity. It is therefore recommended that instrumental analytical techniques and several bioautography assays be performed concurrently, and bioautography assays should use a variety of reporter organisms. Two types of bacterial growth bioassays are recommended in any assessment of antibacterial-like activity derived from CF (and possibly from other FQs). A standardized E. coli bioassay should be used as a general screening procedure to facilitate intra- and inter-laboratory exchange of data. Additionally, soil-specific (region-specific) growth inhibition bioassays should be undertaken using several species of endemic soil bacteria. It is likely that the two sets of data will be useful in future risk assessment processes.     

Role of waste management with regard to climate protection: a case study.

According to the Kyoto Protocol and the burden-sharing agreement of the European Union, Austria is required to cut greenhouse gas (GHG) emissions during the years 2008 to 2012 in order to achieve an average reduction of 13%, based on the level of emissions for the year 1990. The present contribution gives an overview of the history of GHG emission regulation in Austria and identifies the progress made towards the realization of the national climate strategy to attain the GHG emission targets. The contribution uses Austria as an example of the way in which proper waste management can help to reduce GHG emissions. The GHG inventories show that everything must be done to minimize the carbon input due to waste deposition at landfill sites. The incineration of waste is particularly helpful in reducing GHG emissions. The waste-to-energy by incineration plants and recovery of energy yield an ecologically proper treatment of waste using state-of-the-art techniques of a very high standard. The potential for GHG reduction of conventional waste treatment technologies has been estimated by the authors. A growing number of waste incinerators and intensified co-incineration of waste in Austrian industry will both help to reduce national GHG emissions substantially. By increasing the number and capacity of plants for thermal treatment of waste the contribution of proper waste management to the national target for reduction of GHG emissions will be in the range of 8 to 14%. The GHG inventories also indicate that a potential CO2 reduction of about 500 000 t year(-1) is achievable by co-incineration of waste in Austrian industry.