Assessment of compost quality for its environmentally safe use by means of an ecotoxicological test on a soil organism

A research project was carried out to evaluate toxicological effects of compost addition to agricultural soil using the earthworm Eisenia foetida (Annellida) as a representative organism of the soil fauna. Moreover, the correlation between compost biochemical stabilization and toxicity at different phases of the composting process was assessed. Samples were collected from three composting plants at three different maturation levels (beginning of the composting process, intermediate compost after bio-oxidation, and mature refined compost). Two tests were performed: a standard chronic solid-phase test and an acute solid-phase test (developed originally by the authors). In the first test, the measured end-points were mortality, growth and reproduction; while in the second test earthworms’ behavior was evaluated. The chosen compost concentrations in soil ranged from 2.5 to 100 %, with the aim of obtaining the toxicological parameters (LC50) and to mimic real agricultural dosages for the lower concentrations. Results indicated an increase in compost toxicity with greater compost concentrations; in particular, agricultural compost dosage below 10 % showed no toxicity. Moreover, toxicity did not decrease during composting; intermediate compost showed the highest LC50 values. As a consequence, no correlation was ascertained between the results of ecotoxicological analysis and waste biochemical stability parameters during the composting process.     

Performance of a Semi-Industrial Scale Gasification Process for the Destruction of Polychlorinated Biphenyls

Abstract

A semi-industrial scale test was conducted to thermally treat mixtures of spent oil and askarels at a concentration of 50,000 ppm and 100,000 ppm of polychlorinated biphenyls (PCBs) under a reductive atmosphere. In average, the dry-basis composition of the synthesis gas (syngas) obtained from the gasification process was: hydrogen 46%, CO 34%, CO₂ 18%, and CH₄ 0.8%. PCBs, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans (PCDDs/PCDFs) in the gas stream were analyzed by high-resolution gas chromatography (GC)-mass spec-trometry. The coplanar PCBs congeners 77, 105, 118, 156/157, and 167 were detected in the syngas at concentrations <2 ×10^?7 mg/m³ (at 298 K, 1 atm, dry basis, 7% O₂). The chlorine released in the destruction of the PCBs was transformed to hydrogen chloride and separated from the gas by an alkaline wet scrubber. The concentration of PCBs in the water leaving the scrubber was below the detection limit of 0.002 mg/L, whereas the destruction and removal efficiency was >99.9999% for both tests conducted. The concentration of PCDDs/PCDFs in the syngas were 8.1 ×10^?6 ng-toxic equivalent (TEQ)/m³ and 7.1 × 10^?6 ng-TEQ/m³ (at 298 K, 1 atm, dry basis, 7% O₂) for the tests at 50,000 ppm and 100,000 ppm PCBs, respectively. The only PCDD/F congener detected in the gas was the octachloro-dibenzo-p-dioxin, which has a toxic equivalent factor of 0.001. The results obtained for other pollutants (e.g., metals and particulate matter) meet the maximum allowed emission limits according to Mexican, U.S., and European regulations for the thermal treatment of hazardous waste (excluding CO, which is a major component of the syngas, and total hydrocarbons, which mainly represent the presence of CH₄).     

Method of median semi-variance for the analysis of left-censored data: Comparison with other techniques using environmental data

In environmental monitoring, variables with analytically non-detected values are commonly encountered. For the statistical evaluation of these data, most of the methods that produce a less biased performance require specific computer programs. In this paper, a statistical method based on the median semi-variance (SemiV) is proposed to estimate the position and spread statistics in a dataset with single left-censoring. The performances of the SemiV method and 12 other statistical methods are evaluated using real and complete datasets. The performances of all the methods are influenced by the percentage of censored data. In general, the simple substitution and deletion methods showed biased performance, with exceptions for L/2, Inter and L/√2 methods that can be used with caution under specific conditions. In general, the SemiV method and other parametric methods showed similar performances and were less biased than other methods. The SemiV method is a simple and accurate procedure that can be used in the analysis of datasets with less than 50% of left-censored data.     

Microalgae biosynthesis of silver nanoparticles for application in the control of agricultural pathogens

The occurrence of diseases in cultivars has caused significant losses in global food production. The advancement of nanobiotechnology makes it possible to obtain new products to be used in the control of pathogens in cultivars. Silver nanoparticles can be synthesized by microalgae and are widely known for their antimicrobial activity. In addition, the biomass produced in microalgal culture for the biosynthesis of the nanoparticles also demonstrates antimicrobial properties, as it can increase the antibacterial and antifungal potential of the silver nanoparticles. In this context, this article addresses the use of microalgae to biosynthesize silver nanoparticles simultaneously with biomass production. In addition, we demonstrate the antimicrobial potential of these nanomaterials, as well as of the microalgal biomass produced in biosynthesis, to use in the control of pathogens in agriculture.     

Real-world vehicle emissions: a summary of the Sixteenth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council held its 16th workshop in March 2006, with 83 presentations describing the most recent mobile source-related emissions research. In this paper, we summarize the presentations from researchers who are engaged in improving our understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed evaluation of in-use emissions control programs, effects of fuels on emissions, emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

Records of polychlorinated biphenyls (PCBs) in sediments of four remote Chilean Andean Lakes

Sediment cores from four Chilean lakes along the Andes Chain (Chungará, Laja, Castor and Venus) were analysed in order to investigate PCB concentrations and distributions in sediment samples. Sediment cores were analysed for PCBs using gas chromatography (GC-ECD/MS) and radioisotopically dated using 210Pb. Organic carbon content (OC) and 210Pb fluxes were also measured. Results showed that sediment PCB concentrations (ngg(-1) d.w.) at Lake Chungará (1.2 +/- 1) in northern Chile, Laja (5 +/- 4) in central, and in Lake Castor (3.5 +/- 4) in southern Chile (the eastern side of the Andes Mountain) were lower than sediments collected from Lake Venus (64 +/- 30) located in southern Chile (the western side) which contained 15-fold higher concentrations of PCBs. The percentage (%) of organic carbon was variable and showed a high range of values in the sediment fluctuating from 2% (Lake Laja) to 22% (Lake Chungará). Analysis of 210Pb fluxes, presented a decrease trend following Lake Laja>Castor>Chungará with a positive correlation with rainfall at each site. Sedimentation rates in Lake Castor (1846 gm(-2)yr(-1)) were higher than at Chungará (748 gm(-2)yr(-1)) and Lake Laja (508 gm(-2)yr(-1)). Focusing factor (FF) is used as a tool to elucidate PCB input in the aquatic ecosystem. FF were lower (<1) for the shallower lakes (Lakes Chungará and Castor). This study provides background levels of PCBs at remote lakes in Chile. Differences in geographical characteristics (orographic effect) might play an important role in the arrival of PCBs, particularly into the southern lakes. PCB fluxes indicated deposition of PCBs in recent sediments is higher than in previous years with peaks of PCB between 1991 and 1998. The continuing increase of PCB inputs in remote Chilean lakes, could be associated with long range atmospheric transport (LRAT).     

Ferronickel slag as free-draining rockfill dike material: a novel waste solution for mining regions

Journal of Material Cycles and Waste Management - Mining sites are vulnerable to erosion and siltation of rivers. While the construction of rockfill dikes can mitigate siltation, existing rockfill...     

Differential aggregation of polystyrene and titanium dioxide nanoparticles under various salinity conditions and against multiple proteins types

The interaction of nanoplastics (NPls) and engineered nanoparticles (ENPs) with organic matter and environmental pollutants is particularly important. Therefore, their behavior should be investigated under the different salinity conditions, mimicking rivers and coastal environments, to understand this phenomenon in those areas. In this work, we analyzed the elementary characteristics of polystyrene-PS (unmodified surface and modified with amino or carboxyl groups) and titanium dioxide-TiO2 nanoparticles. The effect of salinity on their colloidal properties was studied too. Also, the interaction with different types of proteins (bovine serum albumin-BSA and tilapia proteins), as well as the formation of the BSA corona and its effect on the colloidal stability of nanoparticles, were evaluated. The morphology and dispersion of sizes were more uniform in unmodified-surface PS-NPs (70.5?±?13.7 nm) than in TiO2-NPs (131.2?±?125.6 nm). Likewise, Rama spectroscopy allowed recognizing peaks associated with the PS phenyl group aromatic ring in unmodified-surface PS-NPs (621, 1002, 1582, and 1602 cm^?1). For TiO2-NPs, the data suggest belonging to the tetragonal form, also known as rutile (445, 610 cm^?1). The elevation of salinity dose-dependently decreased NP colloid stability, with more significant variation in the PS-NPs compared to TiO2-NPs. The organic matter is also involved in this phenomenon, differentially as a function of time compared to its absence (unmodified-surface PS-NPs 30 psu/TOC 5 mgL^?1/24 h: 2876.6?±?378.03 nm; unmodified-surface PS-NPs 30 psu/24 h: 2133?±?49.57 nm). In general, the TiO2-NPs demonstrated greater affinity with all proteins tested (0.066 g/L). It was observed that morphology, size, and surface chemical modification intervene in a relevant way in the interaction of the nanoparticles with bovine serum albumin (unmodified-surface PS-NPs 298 K: 6.08E⁺⁰²; 310 K: 6.63E⁺⁰²; TiO2-NPs 298 K: 8.76E⁺⁰²; 310 K: 1.05E⁺⁰³ L mol^?1) and tilapia tissues proteins (from blood, gills, liver, and brain). Their morphology and size also determined the protein corona formation and the NPs’ agglomeration. These findings can provide references during knowledge transfer between NPls and ENPs.

     

Starch-Based Materials Encapsulating Anthocyanins: A Review

Journal of Polymers and the Environment - Anthocyanins (ACNs) are natural pigments broadly used in the food industry due to their color, antioxidant, and antimicrobial properties, however, these...     

Lateral flow assay applied to pesticides detection: recent trends and progress

Environmental Science and Pollution Research - Devices based on lateral flow assay (LFA) have been gaining more and more space in the detection market mainly due to their simplicity, speed, and low...