To assess the effect of changes in traffic density and fuels used for heating at the beginning of the 1990s, 1992–2005 monthly
averages of PM10, SO2, NO2, NO, CO and O3 from Prague, the Czech capital, were analyzed together with long term trends in emissions of major pollutants, fuel consumption
and number of vehicles registered in Prague. The data from all monitoring stations were retrieved from the database of the
state automated monitoring system. Correlation coefficients between ambient monthly averaged temperature and all pollutants
of concern showed distinct seasonal trends. The results showed that while SO2 and to some extent also CO concentrations dropped namely in the first half of the analyzed period (1992–1997) as a result
decreased fossil fuel consumption for local heating, the behaviour of other pollutant concentrations followed a different
pattern. PM10 concentrations decreased during the beginning of the 1990s but showed a sign of increase after 2000. Concentrations of ozone
and NO2 did not reveal any significant change throughout the whole studied period. It can be concluded that during the studied period
traditional urban sources of pollution, such as coal and oil combustion, lost their importance but were simultaneously substituted
by pollutants from automotive transport (namely PM and NO2) making the problem of air quality even worse. 相似文献
Environmental Science and Pollution Research - The most common mycotoxin found in European foodstuffs, especially unprocessed grains, is deoxynivalenol (DON), which inhibits proteosynthesis and... 相似文献
This study monitored particle size-dependent variations in atmospheric polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Two gas/particle partitioning models, the subcooled liquid vapor pressure (P(L)(0)) and the octanol-air partition coefficient (K(OA)) model, were applied to each particle sizes. The regression coefficients of each fraction against the gas/particle partition coefficient (K(P)) were similar for separated particles within the same sample set but differed for particles collected during different periods. Gas/particle partitioning calculated from the integral of fractions was similar to that of size-segregated particles and previously measured bulk values. Despite the different behaviors and production mechanisms of atmospheric particles of different sizes, PCDD/F partitioning of each size range was controlled by meteorological conditions such as atmospheric temperature, O(3) and UV, which reflects no source related with certain particle size ranges but mixed urban sources within this city. Our observations emphasize that when assessing environmental and health effects, the movement of PCDD/Fs in air should be considered in conjunction with particle size in addition to the bulk aerosol. 相似文献
Environmental Science and Pollution Research - Materials held within mine tailings pose a serious risk to the environment in cases of tailings dam failure. Collapse of the tailing dam at the... 相似文献
Photocatalytic properties of titanium (IV) oxide (TiO2) in anatase form can be used for various purposes, including photocatalytic purification of water. For such an application, suspended or fixed photocatalytic reactors are used. Those with fixed phase seem to be preferred due to some advantages, one of which is the avoidance of photocatalyst filtration. To avoid leaching and exfoliation of the fixed phase, an immobilization procedure leading to a good adhesion of a catalyst to a substrate is crucial. Within this work, we present physical and photocatalytic characterization results of five commercially available TiO2 photocatalysts (P25, P90, PC500, KRONOClean 7000, VPC-10) and one pigment (Hombitan LO-CR-S-M), which were successfully immobilized on glass slides by a “sol suspension” procedure. Different mechanical tests and characterization methods were used to evaluate the stability and morphology of the layers. Evaluation of photocatalytic activity was done by tests under UVA and UV–vis irradiation, using a method based on the detection of the fluorescent oxidation product of terephthalic acid (TPA), i.e., hydroxyterephthalic acid (HTPA). Aeroxide® P90 incorporated into the silica-titania binder was the most photocatalytically active layer and, unlike the others, showed significant increase of photocatalytic activity through the entire range of tested UVA irradiation intensities (2.3 mW/cm2–6.1 mW/cm2). The high mechanical stability of some photocatalytic layers allows using them in water photocatalytic purification reactions. 相似文献
Flora of the still unchanged or slightly modified floodplains is particularly valuable. Such are the natural, periodically flooded riparian ecosystems within the Mid-Pripyat river valley in Belarus. Distinctive elements of that area are ‘periodic islands’, which arise from the most elevated parts of the riverbed during flooding and have a specific microtopography. The aim of the research was to recognize floristic composition and ecological conditions of the ‘islands.’ Noted plants were mainly photophilous, by clearly varied in soil moisture, acidity and fertility requirements. 相似文献
The aim of research was to assess the changes of annual radial increment of Scots pine forests in the vicinity of intensive and moderate industrial pollution of “Achema” factory producing mineral fertilizers. Our results indicate that the radial growth of the pine tree can be divided into three different periods: growth promotion, growth inhibition and growth recovery. Low levels of nitrogen emissions were beneficial for tree growth: the radial increment in the intensive and moderate pollution zones increased by 15–25% and 10%, respectively compared to control. During the growth inhibition period, the total annual industrial emission was 37–40 kt, and 40–45% radial growth loss was observed for the closest and 15–20% for the most distant stands. The radial growth decrease slowed down and the recovery of damaged stands began in 1990–1992 then air pollution was considerably reduced. The rate of forest recovery was high for the most damaged stands: their radial growth was close to control in 2000–2011. 相似文献
Detailed SEM/EDS investigation of used dental amalgams was carried out in order to characterise morphology and chemical composition of secondary metal-bearing phases resulting from long-term exposure of dental amalgam to oral environment, and assess their solubility in gastric environment. The investigation revealed numerous secondary phases, represented by compositionally and morphologically complex Hg-, Cu-, Sn-, Ag-, Zn-bearing sulphides and oxides/hydroxides, while sulphates and phosphates are scarce. Secondary metal-bearing phases mostly occur at the amalgam/tooth interface; however, some phases were found only on the occlusal surfaces of amalgam. Secondary phases mostly form porous aggregates of minute crystallites and micro- or nanocrystalline crusts. In oral environment, these phases are mostly stable and represent trapping media for dissolved potentially toxic metals released during amalgam corrosion. Simplified PHREEQC calculations of solubility of secondary metal-bearing phases in aqueous environment under conditions similar to those in gastric environment showed that secondary phases are more soluble in gastric environment than in oral solutions, which is mostly due to their forms of occurrence. Secondary phases in gastric environment thus act as secondary sources of potentially toxic metals, particularly Sn, Zn and also Cu, which are released both under reducing and oxidising conditions especially in acidic environment. Only very small amounts of Hg are potentially released and should not represent serious threat. Secondary phases that contribute the most to bioaccessibility of these metals are Sn hydroxychlorides, Sn oxides/hydroxides, Sn sulphates/hydroxysulphates, Sn oxides, Zn sulphides and Cu sulphides (Cu2S).