Recursive Operability Analysis as a decision support tool for Risk-Based Maintenance

This work was developed with the support of MEMC, one of the most important producers of ultra-pure silicon wafers for electronic applications throughout the world. The availability of ultra-pure water is of prime importance in the silicon production process. In order to maximize the availability of UP water, MEMC has developed a preventive maintenance program and a detailed record of each maintenance intervention is recorded. This has allowed a complete failure rate data bank to be developed. In order to optimize the maintenance intervention, a Recursive Operability Analysis (ROA) has been used as a decision support tool. The results of the ROA, coupled with the failure rates, have made it possible to calculate the expected number of events (ENE) of various top events (TEs). The magnitude of each TE has been estimated on the basis of the monetary losses provoked by each event. The risk then has been calculated and the events ranked on this basis. Maintenance policies have been optimized with the aim of reducing the risk of the top ranked events.     

Municipal solid waste management in Pudong New Area, China

The increase in population, the rapid economic growth and the rise in community living standards accelerate municipal solid waste (MSW) generation in developing cities. This problem is especially serious in Pudong New Area, Shanghai, China. The daily amount of MSW generated in Pudong was about 1.11 kg per person in 2006. According to the current population growth trend, the solid waste quantity generated will continue to increase with the city's development. In this paper, we describe a waste generation and composition analysis and provide a comprehensive review of municipal solid waste management (MSWM) in Pudong. Some of the important aspects of waste management, such as the current status of waste collection, transport and disposal in Pudong, will be illustrated. Also, the current situation will be evaluated, and its problems will be identified.     

PCDD/Fs and PCBs in ambient air in a highly industrialized city in Northern Italy

Ambient air samples were collected in five locations around a polychlorobiphenyl (PCB) production plant in a highly industrialized city in the north of Italy, for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) and PCBs.PCDD/F atmospheric concentrations were lower than those generally detected in urban areas, while PCB concentrations were higher than in urban and industrialized areas in other countries, especially in the locations closest to the plant. To identify source emissions responsible for air pollution we used principal component analysis (PCA) to compare the “fingerprint” of the air in Brescia with some source-related experimental and published data. This analysis showed that the PCDD/F fingerprints were more similar to steel plant emission data, while none of the PCB air patterns were comparable to emission profiles, indicating that different sources are responsible for the concentration of these two pollutants. The highest PCB concentrations detected in the areas closest to the chemical plant are indicative of its impact on the surrounding environment.     

Results of the monitoring program of pesticide residues in organic food of plant origin in Lombardy (Italy)

Organic agriculture, with its restrictions on the use of synthetic chemical inputs, seems to offer a low-residue alternative to conventional methods. In Europe, the Council Regulation n. 2092/91/EEC regulates the production and trade of organic products and foodstuffs; national and regional legislation in Italy gives specific guidance on the surveillance of organic agriculture. However, monitoring of specific chemical residues in organic foodstuffs is part of the regular controls on food, aiming to safeguard consumer's health. Monitoring programs are coordinated at the national level by the Ministry of Health and at local level by Regional authorities. In Lombardy, in accordance with the provisions of the General Directorate of Health of the Region and under the supervision of the 15 Local Health Units, a monitoring program of pesticide residues in food of plant origin is undertaken every year. The International Centre for Pesticides and Health Risk Prevention (ICPS), on behalf of the General Directorate of Health of the Region of Lombardy, has been collecting and elaborating the data resulting from the analysis of food samples, carried out by the local laboratories. During the period 2002-2005, a total of 3508 samples food of plant origin were analyzed for pesticide residues, among which were 266 samples of organic farming products. Commodities were classified into groups (citrus fruits, legumes, vegetables, potatoes, processed products, cereals, and fruit other than citrus) and the outcomes of the analyses were reported by year, origin of the sample and presence/absence of pesticide residues. Results showed that the vast majority of organic farming products were in conformity with the relevant legislation and did not contain detectable pesticide residues. A limited amount of samples had residues at concentration below the Maximum Residue Limit (MRL). Only in one sample the residue level was above the MRL, however it did not pose a concern for public health, as demonstrated by the outcomes of dietary risk assessment. Organic fruits and vegetables can be expected to contain fewer agrochemical residues than conventionally grown alternatives. There is a widespread belief that organic agriculture products are safer and healthier than conventional foods. It is difficult to come to conclusions, but what should be made clear to the consumer is that "organic" does not automatically equal "safe". In the absence of adequate comparative data, additional studies in this area of research are required.     

Influence of weight on the content of trace metals in tissues of Mytilus galloprovincialis (Lamarck, 1819): a forecast model

Fifty seven samples of Mytilus galloprovincialis (Lamarck, 1819) collected along the breakwater barriers of Fano (station 1) and Pesaro (station 2), Adriatic Sea, Marche Region, central Italy, were analyzed by atomic absorption spectrometry and Cd, Cu, Pb and Zn concentrations in the soft tissues were measured. The aims of this work were the statistical analysis of Cd-weight, Cu-weight, Pb-weight, Zn-weight relationships, and the building of a tendency function that allows assessing with a good approximation the concentrations of a metal in different weight organisms. In Mytilus galloprovincialis the content of Cd proportionally grew with the weight and therefore its concentration was independent from this factor; while the concentration of Pb decreased as the weight increased. In both cases the accuracy of multiple regression models improved considering the variable ‘site’, while the same approach appeared not reliable for Cu and Zn, that were two essential metals. Our results showed that a tendency function was reliable, solid and able to predict to a very satisfying extent the concentration of non-physiological metals, like Cd and Pb; while it did not show a good approximation with real Cu and Zn contents.     

Survey on fluoride, bromide and chloride contents in public drinking water supplies in Sicily (Italy)

Six hundred and sixty-seven water samples were collected from public drinking water supplies in Sicily and analysed for electric conductivity and for their Cl(-), Br(-) and F(-) contents. The samples were, as far as possible, collected evenly over the entire territory with an average sampling density of about one sample for every 7,600 inhabitants. The contents of Cl(-) and Br(-), ranging between 5.53 and 1,302 mg/l and between <0.025 and 4.76 mg/l respectively, correlated well with the electric conductivity, a parameter used as a proxy for water salinity. The highest values were found both along the NW and SE coasts, which we attributed to seawater contamination, and in the central part of Sicily, which we attributed to evaporitic rock dissolution. The fluoride concentrations ranged from 0.023 to 3.28 mg/l, while the highest values (only three exceeding the maximum admissible concentration of 1.5 mg/l) generally correlated either with the presence in the area of crystalline (volcanic or metamorphic) or evaporitic rocks or with contamination from hydrothermal activity. Apart from these limited cases of exceeding F(-) levels, the waters of public drinking water supplies in Sicily can be considered safe for human consumption for the analysed parameters. Some limited concern could arise from the intake of bromide-rich waters (about 3% exceeding 1 mg/l) because of the potential formation of dangerous disinfection by-products.     

Macrodispersion by diverging radial flows in randomly heterogeneous porous media

Radial flow takes place in a heterogeneous porous formation where the transmissivity T is modelled as a stationary random space function (RSF). The steady flow is driven by a given rate, and the mean velocity is radial. A pulse-like of a tracer is injected in the porous formation, and the thin plume spreads due to the fluctuations of the velocity which results a RSF as well. Transport is characterized by the mean front, and by the second spatial moment of the plume. We are primarily interested in tracer macrodispersion modelling. With the neglect of pore-scale dispersion, macrodispersion coefficients are computed at the second order of approximation, without neglecting the head-gradient fluctuations. Although transport is non-ergodic at the source, it is shown that ergodicity is achieved at small distances from the source. This is due to the fact that close to the source local velocities are quite large, and therefore solute particles become uncorrelated very soon. Under ergodic conditions, we compare macrodispersion mechanism in radial flows with that occurring in mean uniform flows. At short distances the spreading effect is highly enhanced by the large variability of the flow field, whereas at large distances transport exhibits a lesser dispersion due to the reduction of velocities. This supports the explanation provided by Indelman and Dagan (1999) to justify why the macrodispersivity is found smaller than that pertaining to mean uniform flows. The model is tested against a tracer transport experiment (Fernàndez-Garcia et al., 2004) by comparing the theoretical and experimental breakthrough curves. The accordance with real data, that is achieved without any fitting to concentration values, strengthens the capability of the proposed model to grasp the main features of such an experiment, the approximations as well as experimental uncertainties notwithstanding.     

Recovery of MSWI and soil washing residues as concrete aggregates

The aim of the present work was to study if municipal solid waste incinerator (MSWI) residues and aggregates derived from contaminated soil washing could be used as alternative aggregates for concrete production.Initially, chemical, physical and geometric characteristics (according to UNI EN 12620) of municipal solid waste incineration bottom ashes and some contaminated soils were evaluated; moreover, the pollutants release was evaluated by means of leaching tests. The results showed that the reuse of pre-treated MSWI bottom ash and washed soil is possible, either from technical or environmental point of view, while it is not possible for the raw wastes.Then, the natural aggregate was partially and totally replaced with these recycled aggregates for the production of concrete mixtures that were characterized by conventional mechanical and leaching tests. Good results were obtained using the same dosage of a high resistance cement (42.5R calcareous Portland cement instead of 32.5R); the concrete mixture containing 400 kg/m³ of washed bottom ash and high resistance cement was classified as structural concrete (C25/30 class). Regarding the pollutants leaching, all concrete mixtures respected the limit values according to the Italian regulation.     

Waste collection multi objective model with real time traceability data

Waste collection is a highly visible municipal service that involves large expenditures and difficult operational problems, plus it is expensive to operate in terms of investment costs (i.e. vehicles fleet), operational costs (i.e. fuel, maintenances) and environmental costs (i.e. emissions, noise and traffic congestions). Modern traceability devices, like volumetric sensors, identification RFID (Radio Frequency Identification) systems, GPRS (General Packet Radio Service) and GPS (Global Positioning System) technology, permit to obtain data in real time, which is fundamental to implement an efficient and innovative waste collection routing model. The basic idea is that knowing the real time data of each vehicle and the real time replenishment level at each bin makes it possible to decide, in function of the waste generation pattern, what bin should be emptied and what should not, optimizing different aspects like the total covered distance, the necessary number of vehicles and the environmental impact. This paper describes a framework about the traceability technology available in the optimization of solid waste collection, and introduces an innovative vehicle routing model integrated with the real time traceability data, starting the application in an Italian city of about 100,000 inhabitants. The model is tested and validated using simulation and an economical feasibility study is reported at the end of the paper.     

Evaluation of ABC efflux transporters genes expression in kidney of rainbow trout (Oncorhynchus mykiss) fed with melamine and cyanuric acid diets

Gene expression experiments were targeted in order to monitor the ABC efflux transporters, which is potentially involved in cellular detoxification/defense. Changes in expression levels of different ABC genes in kidney of Oncorhynchus mykiss fed with melamine and melamine + cyanuric acid enriched diets were recorded in both treated groups by mRNA ΔΔ_CT relative quantification method. Expression profiles of eight different ABC genes basically showed low alterations in melamine group and more consistent changes in melamine + cyanuric acid treated fish, compared with own control. In the last group ABCC2 gene over expression was the more evident alteration. These results suggest that ABC efflux system could be involved in mobilization of hydrophilic molecules in the forcing condition of chronic exposure.