Nocturnal accumulation of CO2 underneath a tropical forest canopy along a topographical gradient

Flux measurements of carbon dioxide and water vapor above tropical rain forests are often difficult to interpret because the terrain is usually complex. This complexity induces heterogeneity in the surface but also affects lateral movement of carbon dioxide (CO2) not readily detected by the eddy covariance systems. This study describes such variability using measurements of CO2 along vertical profiles and along a toposequence in a tropical rain forest near Manaus, Brazil. Seasonal and diurnal variation was recorded, with atmospheric CO2 concentration maxima around dawn, generally higher CO2 build-up in the dry season and stronger daytime CO2 drawdown in the wet season. This variation was reflected all along the toposequence, but the slope and valley bottom accumulated clearly more CO2 than the plateaus, depending on atmospheric stability. Particularly during stable nights, accumulation was along lines of equal altitude, suggesting that large amounts of CO2 are stored in the valleys of the landscape. Flushing of this store only occurs during mid-morning, when stored CO2 may well be partly transported back to the plateaus. It is clear that, for proper interpretation of tower fluxes in such complex and actively respiring terrain, the horizontal variability of storage needs to be taken into account not only during the night but also during the mornings.     

Odorous emission reduction from a waste landfill with an optimal protection system based on fuzzy logic

Effective landfill management and operation require an accurate evaluation of the occurrence and extent of odour emission events, which are among the main causes of resident complaints and concerns, in particular in densely urbanised areas. This paper proposes a fuzzy optimal protection system (FOPS) based on fuzzy logic to manage odour production from a municipal solid waste (MSW) landfill. The case study is a MSW landfill in an old quarry site located 6 km north-west of Naples city centre (Italy). The aim is to reduce the odour nuisance in the area surrounding the landfill where there are several sensitive receptors. FOPS is based on logical relationships between local atmospheric dynamics, number and intensity of odour pollution events detected by certain fixed receptors and odour emission rate via an optimal fuzzy approach. Such system allows to start, in real time, established mitigation actions required to further reduce the odorous emissions from the landfill itself (e.g. spraying of perfumed substances and activation of extraction wells), especially when weather conditions might not be favourable and cause by causing a higher odour perception. The fuzzy system was coupled with the air pollutant transport software CALPUFF to simulate the odour dispersion in the considered area taking into account both different odour emission rates and local weather conditions. FOPS results show that this approach can be very useful as, by measuring the odour concentrations, a significant reduction of the odour exceedances over the thresholds fixed, to minimise the olfactory harassment, was observed in the whole area studied.

     

Microplastics in seawater: sampling strategies,laboratory methodologies,and identification techniques applied to port environment

Environmental Science and Pollution Research - The European Interreg Italy–France 2014–2020 Maritime Project SPlasH! (Stop to Plastics in H2O!) focused on the study of microplastics...     

Evaluation of concrete production with solid residues obtained from fluidized-bed incineration of MSW-derived solid recovered fuel (SRF)

The aim of this work was to evaluate the use of solid residues derived from municipal solid waste-derived solid recovered fuel incinerated in a circulating fluidized-bed boiler for concrete production. The concrete mixtures casted by partially replacing the natural aggregates with bottom ash (27 %) and exhausted sand (13 %), according to the European standards for concrete, may be classified in the C16/20 class. The leaching tests performed on monolithic concrete samples showed that the concentrations measured in the leachates were lower than limit values for waste recovery, with the only exception of nickel for the mixture made with the exhausted sand.     

Kyoto commitments: macro and micro insights on trading and the Clean Development Mechanism

The purpose of this paper is twofold. First, we raise some issues related to the expected dimension of the carbon market. This analysis is based on a survey of model results on the implementation of the Kyoto goal with and without reliance on emissions trading. In particular, we consider both the emissions and the financial implications associated with different trading scenarios. Transfers related to international GHG trading might be equivalent to a 400% increase in foreign direct investment to countries with economies in transition. A closer look at the GHG reductions expected from the developing world also suggests that global models may be overly optimistic in their assessment of the contribution of flexibility mechanisms in meeting the Kyoto emission goals. OECD countries may need to rely more on domestic policies to reduce their emissions than what has so far been projected by global models. Second, we use a simple microeconomic model to test the potential contribution of typical power generation technologies in the context of the Clean Development Mechanism. Projects that are defined as additional in terms of the environment but already profitable can bring about significant results at a relatively low price of certified emission reductions. To assume that the contribution of the CDM will come close to what is projected by global models (both for prices and quantities) is to assume that such projects could be credited under the CDM. This revised version was published online in July 2006 with corrections to the Cover Date.     

Monitoring of total and bioavailable heavy metals concentration in agricultural soils

The aim of this paper is to evaluate total and bioavailable concentration of heavy metals in agricultural soils in order to estimate their distribution, to identify the possible correlations among toxic elements and the pollution sources, to distinguish the samples in relation to sampling site or to sampling depth, and to evaluate the available fraction providing information about the risky for plants. In particular, we reinvestigated total concentrations of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, V, and Zn and available concentrations of As, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, and Zn in soil from Apulia (Southern Italy). Analytical results showed that total concentrations, for all soils, are in the range permitted by regulations in force in Italy, but some soils evidence slight enrichment of Cd, Cr, Cu, Pb, and Zn. All the heavy metals in the available fraction were below the detection limits of the analytical techniques used except Cu, Ni, Pb, and Zn.     

Vehicular particulate matter emissions in road tunnels in Sao Paulo, Brazil

In the metropolitan area of S?o Paulo, Brazil, ozone and particulate matter (PM) are the air pollutants that pose the greatest threat to air quality, since the PM and the ozone precursors (nitrogen oxides and volatile organic compounds) are the main source of air pollution from vehicular emissions. Vehicular emissions can be measured inside road tunnels, and those measurements can provide information about emission factors of in-use vehicles. Emission factors are used to estimate vehicular emissions and are described as the amount of species emitted per vehicle distance driven or per volume of fuel consumed. This study presents emission factor data for fine particles, coarse particles, inhalable particulate matter and black carbon, as well as size distribution data for inhalable particulate matter, as measured in March and May of 2004, respectively, in the Janio Quadros and Maria Maluf road tunnels, both located in S?o Paulo. The Janio Quadros tunnel carries mainly light-duty vehicles, whereas the Maria Maluf tunnel carries light-duty and heavy-duty vehicles. In the Janio Quadros tunnel, the estimated light-duty vehicle emission factors for the trace elements copper and bromine were 261 and 220 microg km(-1), respectively, and 16, 197, 127 and 92 mg km(-1), respectively, for black carbon, inhalable particulate matter, coarse particles and fine particles. The mean contribution of heavy-duty vehicles to the emissions of black carbon, inhalable particulate matter, coarse particles and fine particles was, respectively 29, 4, 6 and 6 times higher than that of light-duty vehicles. The inhalable particulate matter emission factor for heavy-duty vehicles was 1.2 times higher than that found during dynamometer testing. In general, the particle emissions in S?o Paulo tunnels are higher than those found in other cities of the world.     

Atmospheric concentrations, occurrence and deposition of persistent organic pollutants (POPs) in a Mediterranean coastal site (Etang de Thau, France)

Atmospheric concentrations and deposition fluxes of PCDD/F and PCB have been evaluated over a 1-year period in a Mediterranean coastal lagoon (Etang de Thau, France). Indicative PBDE air concentrations in the hot season are also reported in this work. ∑2,3,7,8-PCDD/Fs and ∑18PCBs (gas + particulate) air concentrations ranged from 67 to 1700 fg m⁻³ and from 13 to 95 pg m⁻³, respectively whereas ∑8PBDEs (gas + particulate) summer time levels varied from 158 to 230 pg m⁻³. The PCDD/F and PCB atmospheric occurrence over Thau lagoon and subsequent inputs to the surface waters are determined by an assemble of factors, being the seasonality of atmospheric concentration, the air mass origin and meteorological conditions important drivers. Total (wet + dry) ∑2,3,7,8-PCDD/Fs and ∑18PCBs deposition fluxes to Thau Lagoon waters are 117 and 715 pg m⁻² d⁻¹, respectively.     

Chemometric data analysis application to Sparus aurata samples from two offshore farming plants along the Apulian (Italy) coastline

The levels of polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), dioxin-like polychlorobiphenyls (DL-PCBs), non-dioxin-like polychlorobiphenyls (NDL-PCBs), and polybromodiphenyl ethers (PBDEs) in fish collected from two marine offshore farming plants were determined. Each sample was constituted by specimens of the same size collected at the same time in four different seasons along the farming year. The feeds given were of industrial origin and the plants were positioned in two different sites respectively exposed to different environmental characteristics. A chemometric approach was applied to interpret the subtle differences observed in fish body burdens across the three chemical groups taken into consideration. The approach consisted in a stepwise multivariate process including a hierarchical cluster analysis (CA) and a linear discriminant analysis (DA). The two main clusters determined by CA were subjected to the canonical DA, backward and forward selection procedures to select the best discriminative functions. A clear temporal and spatial discrimination was found among the samples. Across the three chemical groups, the monthly separation seemed to depend on the growth process and the main exposure was due to the feed. In addition, the two plants differed significantly from the environmental point of view and the most important discriminating group of chemicals were the NDL-PCBs. The approach resulted really effective in discriminating the subtle differences and in individuating suggestions to improve the quality of culturing conditions.     

Rapid determination of residues of pesticides in honey by µGC-ECD and GC-MS/MS: Method validation and estimation of measurement uncertainty according to document No. SANCO/12571/2013

A simple and straightforward method for simultaneous determination of residues of 13 pesticides in honey samples (acrinathrin, bifenthrin, bromopropylate, cyhalothrin-lambda, cypermethrin, chlorfenvinphos, chlorpyrifos, coumaphos, deltamethrin, fluvalinate-tau, malathion, permethrin and tetradifon) from different pesticide classes has been developed and validated. The analytical method provides dissolution of honey in water and an extraction of pesticide residues by n-Hexane followed by clean-up on a Florisil SPE column. The extract was evaporated and taken up by a solution of an injection internal standard (I-IS), ethion, and finally analyzed by capillary gas chromatography with electron capture detection (GC-µECD). Identification for qualitative purpose was conducted by gas chromatography with triple quadrupole mass spectrometer (GC-MS/MS). A matrix-matched calibration curve was performed for quantitative purposes by plotting the area ratio (analyte/I-IS) against concentration using a GC-µECD instrument. According to document No. SANCO/12571/2013, the method was validated by testing the following parameters: linearity, matrix effect, specificity, precision, trueness (bias) and measurement uncertainty. The analytical process was validated analyzing blank honey samples spiked at levels equal to and greater than 0.010 mg/kg (limit of quantification). All parameters were satisfactorily compared with the values established by document No. SANCO/12571/2013. The analytical performance was verified by participating in eight multi-residue proficiency tests organized by BIPEA, obtaining satisfactory z-scores in all 70 determinations. Measurement uncertainty was estimated according to the top-down approaches described in Appendix C of the SANCO document using the within-laboratory reproducibility relative standard deviation combined with laboratory bias using the proficiency test data.