Automobile Shredder Residues in Italy: characterization and valorization opportunities

At the moment Automobile Shredder Residue (ASR) is usually landfilled worldwide, but European draft Directive 2000/53/CE forces the development of alternative solutions, stating the 95%-wt recovery of an End of Life Vehicle (ELV) weight to be fulfilled by 2015. This work describes two industrial tests, each involving 250-300 t of ELVs, in which different pre-shredding operations were performed. The produced ASR materials underwent an extended characterization and some post-shredding processes, consisting of dimensional, magnetic, electrostatic and densimetric separation phases, were tested on laboratory scale, having as main purpose the enhancement of ASR recovery/recycling and the minimization of the landfilled fraction. The gathered results show that accurate depollution and dismantling operations are mandatory to obtain a high quality ASR material which may be recycled/recovered and partially landfilled according to the actual European Union regulations, with particular concern for Lower Heating Value (LHV), heavy metals content and Dissolved Organic Carbon (DOC) as critical parameters. Moreover post-shredding technical solutions foreseeing minimum economic and engineering efforts, therefore realizable in common European ELVs shredding plants, may lead to multi-purposed (material recovery and thermal valorization) opportunities for ASR reuse/recovery.     

Strategies for the enhancement of automobile shredder residues (ASRs) recycling: Results and cost assessment

With reference to the European regulation about the management of End-of-Life Vehicles (ELVs), Directive 2000/53/EC imposes the achievement of a recycling target of 85%, and 95% of total recovery by 2015. Over the last few years many efforts have been made to find solutions to properly manage the waste coming from ELVs with the aim of complying with the targets fixed by the Directive.This paper focuses on the economical evaluation of a treatment process, that includes physical (size and density), magnetic and electrical separations, performed on the light fraction of the automobile shredder residue (ASR) with the aim of reducing the amount of waste to dispose of in a landfill and enhancing the recovery of valuable fractions as stated by the EU Directive. The afore mentioned process is able to enhance the recovery of ferrous and non-ferrous metals of an amount equal to about 1% b.w. (by weight) of the ELV weight, and to separate a high energetic-content product suitable for thermal valorization for an amount close to (but not higher than) 10% b.w. of the ELV weight.The results of the economical assessment led to annual operating costs of the treatment ranging from 300,000 €/y to 350,000 €/y. Since the considered plant treats about 13,500 metric tons of ASR per year, this would correspond to an operating cost of approximately 20–25 €/t. Taking into account the amount and the selling price of the scrap iron and of the non magnetic metal recovered by the process, thus leading to a gain of about 30 €/t per ton of light ASR treated, the cost of the recovery process is balanced by the profit from the selling of the recovered metals. On the other hand, the proposed treatment is able to achieve the fulfillment of the targets stated by Directive 2000/53/EC concerning thermal valorization and reduce the amount of waste generated from ELV shredding to landfill.     

Saturated and unsaturated hydrocarbons in marine benthic algae

Saturated and olefinic hydrocarbons were determined in 24 species of green, brown and red benthic marine algae from the Cape Cod area (Massachusetts, USA). Among the saturated hydrocarbons, n-pentadecane predominates in the brown and n-heptadecane in the red algae. A C₁₇ alkyleyclopropane has been identified tentatively in Ulvalactuca and Enteromorpha compressa, two species of green algae. Mono-and diolefinic C₁₅ and C₁₇ hydrocarbons are common. The structures of several new C₁₇, C₁₉ and C₂₁ mono-to hexaolefins have been elucidated by gas chromatography, mass spectrometry and ozonolysis. In fruiting Ascophyllum nodosum, the polyunsaturated hydrocarbons carbons occur exclusively in the reproductive structures. The rest of the plant contains n-alkanes from C₁₅ to C₂₁. A link between the reproductive chemistry of benthic and planktonic algae and their olefin content is suggested. An intriguing speculation is based on Paffenhöfer's (1970) observation that the sex ratio of laboratory reared Calanus helgolandicus depends upon the species of algae fed to the nauplii. The percentage of males produced correlates with our analyses of heneicosahexaene in the algal food. Our analyses of the hydrocarbons in benthic marine algae from coastal environments should aid studies of the coastal food web and should enable us to distinguish between hydrocarbon pollutants and the natural hydrocarbon background in inshore waters.Contribution No. 2582 of the Woods Hole Oceanographic Institution; and Contribution No. 227, Systematics-Ecology Program.     

Evaluating approaches for scaling-up community-based marine-protected areas into socially equitable and ecologically representative networks

Marine-protected areas (MPAs) are vital to marine conservation, but their coverage and distribution is insufficient to address declines in global biodiversity and fisheries. In response, many countries have committed through the Aichi Target 11 of the Convention on Biological Diversity to conserve 10% of the marine environment through ecologically representative and equitably managed MPAs by 2020. The rush to fulfill this commitment has raised concerns on how increasing MPA coverage will affect other elements of Target 11, including representation and equity. We examined a Philippines case study to assess and compare 3 MPA planning approaches for biodiversity representation and equitable distribution of costs to small-scale fishers. In the opportunistic approach, MPAs were identified and supported by coastal communities. The donor-assisted approach used local knowledge to select MPAs through a national-scale and donor-assisted conservation project. The systematic conservation planning approach identified MPA locations with the spatial prioritization software Marxan with Zones to achieve biodiversity objectives with minimal costs to fishers. We collected spatial data on biodiversity and fisheries features and performed a gap analysis to evaluate MPAs derived from different approaches. We assessed representation based on the proportion of biodiversity features conserved in MPAs and distribution equity by the distribution of opportunity costs (fishing areas lost in MPAs) among fisher stakeholder groups. The opportunistic approach did not ineffectively represent biodiversity and resulted in inequitable costs to fishers. The donor-assisted approach affected fishers disproportionately but provided near-optimal regional representation. Only the systematic approach achieved all representation targets with minimal and equitable costs to fishers. Our results demonstrate the utility of systematic conservation planning to address key elements of Target 11 and highlight opportunities (e.g., integration of local and scientific knowledge can address representation and equity concerns) and pitfalls (e.g., insufficient stakeholder considerations can exacerbate social inequalities) for planning MPAs in similar contexts.     

Synthesis of zeolite from Italian coal fly ash: Differences in crystallization temperature using seawater instead of distilled water

In this study Italian coal fly ash was converted into several types of zeolite in laboratory experiments with temperatures of crystallization ranging from 35 up to 90 °C. Distilled and seawater were used during the hydrothermal synthesis process in separate experiments, after a pre-treatment fusion with NaOH.The results indicate that zeolites could be formed from different kind of Italian coal fly ash at low temperature of crystallization using both distilled and seawater. SEM data and the powder patterns of X-ray diffraction analysis show that faujasite, zeolite ZK-5 and sodalite were synthesized when using both distilled and seawater; zeolite A crystallized only using distilled water. In particular the experiments indicate that the synthesis of zeolite X and zeolite ZK-5 takes place at lower temperatures when using seawater (35 and 45 °C, respectively). The formation of sodalite is always competitive with zeolite X which shows a metastable behaviour at higher temperatures (70–90 °C).The chemical composition of the fly ash source could be responsible of the differences on the starting time of synthesized zeolite with distilled water, in any case our data show that the formation of specific zeolites takes place always at lower temperatures when using seawater.     

Effect of MBT on landfill behavior: an Italian case study

Bad choices in municipal waste (MW) management cause negative effects on sustainability. Evolving regulation has identified prevention and recycling as the best strategies; nevertheless, disposal in landfilling sites plays an essential role since a complete zero-waste scenario is not realistic, currently. Nowadays, policies require a preliminary waste stabilization to decrease the putrescible content. Therefore, mechanical biological treatment (MBT) has replaced the previous crushing, aimed at simple volume reduction. Literature has proved the effectiveness of MBT when MW collection system is ineffective. The present paper considered a facility in an area with a high-performance MW collection system. A long-term (1999–2019) on-site sampling allowed the comparison between two sites of the facility: the old site (before the MBT activation) and the new area, where the stabilized waste is disposed of. Monitoring of biogas, leachate (analyzed parameters: pH, BOD₅, COD, ammonia-nitrogen) and odorous emissions was performed to verify the effect of the stabilization process. The considered long period and the on-site sampling support the relevance of the results, compared to the available literature, often referred to as laboratory scale. The results proved the relatively low benefit of stabilization at the considered facility, which cannot justify the energy consumption of MBT.

     

Non-toxic,high selectivity process for the extraction of precious metals from waste printed circuit boards

● Au, Ag and Pd were recovered from WPCBs with high efficiencies. ● Au leaching is strictly dependent on WPCB size and reagent concentration. ● High Ag extraction efficiencies are achieved regardless of the WPCB size. ● Pd leaching works better with small and medium WPCB sizes. ● The leaching results suggest the possibility of selective recovery of metals. The work presented here focused on the extraction of gold (Au), silver (Ag) and palladium (Pd) from electronic waste using a solution of ammonium thiosulfate. Thiosulfate was used as a valid alternative to cyanide for precious metal extractions, due to its non-toxicity and high selectivity. The interactions between sodium thiosulfate, total ammonia/ammonium, precious metal concentrations and the particle size of the waste printed circuit boards (WPCBs) were studied by the response surface methodology (RSM) and the principal component analysis (PCA) to maximize precious metal mobilization. Au extraction reached a high efficiency with a granulometry of less than 0.25 mm, but the consumption of reagents was high. On the other hand, Ag extraction depended neither on thiosulfate/ammonia concentration nor granulometry of WPCBs and it showed efficiency of 90% also with the biggest particle size (0.50 < Ø < 1.00 mm). Pd extraction, similarly to Au, showed the best efficiency with the smallest and the medium WPCB sizes, but required less reagents compared to Au. The results showed that precious metal leaching is a complex process (mainly for Au, which requires more severe conditions in order to achieve high extraction efficiencies) correlated with reagent concentrations, precious metal concentrations and WPCB particle sizes. These results have great potentiality, suggesting the possibility of a more selective recovery of precious metals based on the different granulometry of the WPCBs. Furthermore, the high extraction efficiencies obtained for all the metals bode well in the perspective of large-scale applications.