Improving dialogue among researchers,local and indigenous peoples and decision-makers to address issues of climate change in the North

Ambio - The Circumpolar North has been changing rapidly within the last decades, and the socioeconomic systems of the Eurasian Arctic and Siberia in particular have displayed the most dramatic...     

Assessing the Effects of Alternative Setback Channel Constraint Scenarios Employing a River Meander Migration Model

River channel migration and cutoff events within large river riparian corridors create heterogeneous and biologically diverse landscapes. However, channel stabilization (riprap and levees) impede the formation and maintenance of riparian areas. These impacts can be mitigated by setting channel constraints away from the channel. Using a meander migration model to measure land affected, we examined the relationship between setback distance and riparian and off-channel aquatic habitat formation on a 28-km reach of the Sacramento River, California, USA. We simulated 100 years of channel migration and cutoff events using 11 setback scenarios: 1 with existing riprap and 10 assuming setback constraints from about 0.5 to 4 bankfull channel widths (bankfull width: 235 m) from the channel. The percentage of land reworked by the river in 100 years relative to current (riprap) conditions ranged from 172% for the 100-m constraint setback scenario to 790% for the 800-m scenario. Three basic patterns occur as the setback distance increases due to different migration and cutoff dynamics: complete restriction of cutoffs, partial restriction of cutoffs, and no restriction of cutoffs. Complete cutoff restriction occurred at distances less than about one bankfull channel width (235 m), and no cutoff restriction occurred at distances greater than about three bankfull widths (∼700 m). Managing for point bars alone allows the setbacks to be narrower than managing for cutoffs and aquatic habitat. Results suggest that site-specific “restriction of cutoff” thresholds can be identified to optimize habitat benefits versus cost of acquired land along rivers affected by migration processes.     

Framing of Geoengineering Affects Support for Climate Change Mitigation

The growing recognition that climate change mitigation alone will be inadequate has led scientists and policymakers to discuss climate geoengineering. An experiment with a US sample found, contrary to previous research, that reading about geoengineering did not reduce conservatives’ skepticism about the existence of anthropogenic climate change. Moreover, depending on how it is framed, geoengineering can reduce support for mitigation among both conservatives and non-conservatives. When geoengineering is framed as a major solution, people worry less about climate change, leading to reduced mitigation support. When framed as disastrous, people perceived geoengineering as riskier, also leading to a decrease in mitigation support. A more moderate framing of geoengineering as a partial solution is less susceptible to moral hazard effects. Overall, results suggest that geoengineering will not lessen political polarization over anthropogenic climate change, and could undercut support for mitigation efforts. Instead, framing geoengineering as a small piece to solving a big puzzle seems to be the best strategy to weaken this potential moral hazard.     

Methodological choices in solution-oriented adaptation research: a diagnostic framework

While methodological choices are critical for solution-oriented adaptation research, the current debate on these is underdeveloped and characterized by simple dichotomies such as bottom-up and top-down as well as vaguely defined concepts such as vulnerability. Adaptation challenges and approaches for addressing them are more diverse than these labels suggest. This paper addresses this deficit by developing a diagnostic framework that helps to identify approaches suitable for addressing a given adaptation challenge. The framework was developed out of the necessity to discuss diverse approaches from natural science, social science and practice in a set of adaptation case studies conducted within the European funded MEDIATION project. Based on these case studies complemented by the literature, we iteratively abstracted typical adaptation challenges researched, typical approaches taken, and empirical, theoretical and normative criteria applied for choosing a particular approach. Our results refine the methodological debate by distinguishing between the three general adaptation challenges of identifying adaptation needs, identifying adaptation measures and appraising adaptation options. Adaptation challenges are further classified according to private and public interest involved, individual or various types of collective action involved, data/model availability, decision-making time horizon, etc. For each type of challenge and approach, we give examples and discuss salient issues. Our results point to the opportunity to apply institutional and behavioural research to support the identification of measures and possibly avoiding barriers in practice. The diagnostic framework also serves as the basis for the forthcoming guidance for assessing vulnerability, impacts and adaptation to be published by the UNEP programme of research on climate change vulnerability, impacts and adaptation.     

Rapid measurement of emissions from military aircraft turbine engines by downstream extractive sampling of aircraft on the ground: Results for C-130 and F-15 aircraft

Aircraft emissions affect air quality on scales from local to global. More than 20% of the jet fuel used in the U.S. is consumed by military aircraft, and emissions from this source are facing increasingly stringent environmental regulations, so improved methods for quickly and accurately determining emissions from existing and new engines are needed. This paper reports results of a study to advance the methods used for detailed characterization of military aircraft emissions, and provides emission factors for two aircraft: the F-15 fighter and the C-130 cargo plane. The measurements involved outdoor ground-level sampling downstream behind operational military aircraft. This permits rapid change-out of the aircraft so that engines can be tested quickly on operational aircraft. Measurements were made at throttle settings from idle to afterburner using a simple extractive probe in the dilute exhaust. Emission factors determined using this approach agree very well with those from the traditional method of extractive sampling at the exhaust exit. Emission factors are reported for CO₂, CO, NO, NO_x, and more than 60 hazardous and/or reactive organic gases. Particle size, mass and composition also were measured and are being reported separately. Comparison of the emissions of nine hazardous air pollutants from these two engines with emissions from nine other aircraft engines is discussed.     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.     

Management options and effects on a marine ecosystem: assessing the future of the Baltic

We are using the coupled models in a decision support system, Nest, to evaluate the response of the marine ecosystem to changes in external loads through various management options. The models address all the seven major marine basins and the entire drainage basin of the Baltic Sea. A series of future scenarios have been developed, in close collaboration with the Helsinki Commission, to see the possible effects of improved wastewater treatment and manure handling, phosphorus-free detergents, and less intensive land use and live stocks. Improved wastewater treatment and the use of phosphorus-free detergents in the entire region would drastically decrease phosphorus loads and improve the marine environment, particularly the occurrence of cyanobacterial blooms. However, the Baltic Sea will remain eutrophic, and to reduce other effects, a substantial reduction of nitrogen emissions must be implemented. This can only be obtained in these scenarios by drastically changing land use. In a final scenario, we have turned 50% of all agricultural lands into grasslands, together with efficient wastewater treatments and a ban of phosphorus in detergents. This scenario will substantially reduce primary production and the extension of hypoxic bottoms, increase water transparency in the most eutrophied basins, and virtually eliminate extensive cyanobacterial blooms.     

The role of periodic boundary forcing in plankton pattern formation

We consider one and two-dimensional minimal models in plankton dynamics. The influence of oscillating boundary forcing functions as agents for triggering pattern formation is discussed. In particular it is found that in these conditions population waves arise for one dimensional models, while for two dimensional models, different amplitudes and frequencies in the boundary forcing generate definite patterns, mimicking the boundary term. This happens even though the model we investigate is very simple. The emergence of these features is an interesting metaphor for the fundamental biological problem of how pattern formation processes may be inevitable in natural heterogeneous ecosystems.