Pre-Colombian Mercury Pollution Associated with the Smelting of Argentiferous Ores in the Bolivian Andes

The development of the mercury (Hg) amalgamation process in the mid-sixteenth century triggered the onset of large-scale Hg mining in both the Old and New Worlds. However, ancient Hg emissions associated with amalgamation and earlier mining efforts remain poorly constrained. Using a geochemical time-series generated from lake sediments near Cerro Rico de Potosí, once the world’s largest silver deposit, we demonstrate that pre-Colonial smelting of Andean silver ores generated substantial Hg emissions as early as the twelfth century. Peak sediment Hg concentrations and fluxes are associated with smelting and exceed background values by approximately 20-fold and 22-fold, respectively. The sediment inventory of this early Hg pollution more than doubles that associated with extensive amalgamation following Spanish control of the mine (1574–1900 AD). Global measurements of [Hg] from economic ores sampled world-wide indicate that the phenomenon of Hg enrichment in non-ferrous ores is widespread. The results presented here imply that indigenous smelting constitutes a previously unrecognized source of early Hg pollution, given naturally elevated [Hg] in economic silver deposits.     

Usability of food industry waste oils as fuel for diesel engines

Two cogeneration units were each fitted with a prechamber (IDI) diesel engine in order to test the feasibility of using waste oils from the food industry as a fuel source, and additionally to test emissions generated by the combustion of these fuels. Esterified waste oils and animal fats as well as mustard oil were tested and compared to the more or less "common" fuels: diesel, rapeseed oil and rapeseed methyl ester. The results show that, in principle, each of these fuels is suitable for use in a prechamber diesel engine. Engine performance can be maintained at a constant level. Without catalytic conversion, the nitrogen oxides emissions were comparable. A significant reduction in NO(x) was achieved through the injection of urea. Combining a urea injection with the SCR catalytic converter reduced NO(x) emissions between 53% and 67%. The carbon monoxide emissions from waste oils are not significantly different from those of "common" fuels and can be reduced the same way as of hydrocarbon emissions, through utilization of a catalytic converter. The rate of carbon monoxide reduction by catalytic conversion was 84-86%. A lower hydrocarbon concentration was associated with fuels of agricultural origin. With the catalytic converter a reduction of 29-42% achieved. Each prechamber diesel engine exhibited its own characteristic exhaust, which was independent of fuel type. The selective catalytic reduction of the exhaust emissions can be realized without restriction using fuels of agricultural origin.     

Trace element concentrations in feathers of seven petrels (Pterodroma spp.)

Environmental Science and Pollution Research - Gadfly petrels (Pterodroma spp.) are one of the most threatened and poorly studied seabird groups, and as marine predators, are exposed to...     

Antibacterial and Drug Elution Performance of Thermoplastic Blends

Food preservatives or drug compounds can be eluted from polymer substrates to prevent the occurrence of hospital-acquired infections and food spoilage. We investigated the antimicrobial and drug-elution properties of the albumin and zein thermoplastic blends plasticized with glycerol and mixed with varying amounts of low-density polyethylene (LDPE), food preservatives (sodium benzoate or sodium nitrite), and drugs (ampicillin or ciprofloxacin). Bacillus subtilis and Escherichia coli were utilized as Gram (+) and Gram (?) species, respectively, for antimicrobial and drug-elution analyses, since these species are common in the human body and in food environments. The amount of contamination occurring in food and medical applications could be limited with usage of plastic blends made from thermomechanical molding of proteins (albumin from hen egg white and zein from corn), drug eluting compounds, and low-density polyethylene.     

The effect of the initial concentration of glycerol on the hydrogen produced by strains of the genus Clostridium spp.

Hydrogen produced by microorganisms is a topic of growing interest because of its potential for derivation from several agro-industrial by-products. In this study, we evaluated the hydrogen production of strains of genus Clostridium (Clostridium acetobutylicum and Clostridium butyricum) using glycerol as a carbon source. Fermentation studies were conducted using three initial concentrations of glycerol: 10, 30 and 50 g/L. The micro-organism growth kinetics and the amounts of solvents and gases were recorded over 48 h. The strain C. acetobutylicum exhibited the best results in terms of hydrogen production, the highest production yield (Y _p/s) of 0.37 mol H₂/mol glycerol and the highest level of productivity (0.75 mg H₂/(L·h)). Based on these results, it is reasonable to conclude that glycerol could be effectively exploited as a carbon source for hydrogen production, which adds value to this primary by-product of standard biodiesel processes.     

Farm‐level Economic and Water Quality Impacts of Comprehensive Nutrient Management Plan Implementation in the Ohio River Basin

In this article, we provide an assessment of comprehensive nutrient management plans (CNMPs) as a tool for addressing nonpoint nutrient and sediment losses from the animal feeding operations (AFOs) in the Ohio River Basin. We employ a macro modeling system to determine the aggregate economic and water quality impacts of CNMP implementation on AFOs in the entire basin. Results of the study indicate that implementing CNMPs on AFOs will help reduce sediment and organic nutrient losses from their current levels at moderate cost. The flexibility inherent in CNMP designs means farmers may be able to achieve water quality and other conservation goals at less cost with CNMPs than with other less flexible policy options.     

Catalase and ascorbate peroxidase—representative H<Subscript>2</Subscript>O<Subscript>2</Subscript>-detoxifying heme enzymes in plants

Plants have to counteract unavoidable stress-caused anomalies such as oxidative stress to sustain their lives and serve heterotrophic organisms including humans. Among major enzymatic antioxidants, catalase (CAT; EC 1.11.1.6) and ascorbate peroxidase (APX; EC 1.11.1.11) are representative heme enzymes meant for metabolizing stress-provoked reactive oxygen species (ROS; such as H₂O₂) and controlling their potential impacts on cellular metabolism and functions. CAT mainly occurs in peroxisomes and catalyzes the dismutation reaction without requiring any reductant; whereas, APX has a higher affinity for H₂O₂ and utilizes ascorbate (AsA) as specific electron donor for the reduction of H₂O₂ into H₂O in organelles including chloroplasts, cytosol, mitochondria, and peroxisomes. Literature is extensive on the glutathione-associated H₂O₂-metabolizing systems in plants. However, discussion is meager or scattered in the literature available on the biochemical and genomic characterization as well as techniques for the assays of CAT and APX and their modulation in plants under abiotic stresses. This paper aims (a) to introduce oxidative stress-causative factors and highlights their relationship with abiotic stresses in plants; (b) to overview structure, occurrence, and significance of CAT and APX in plants; (c) to summarize the principles of current technologies used to assay CAT and APX in plants; (d) to appraise available literature on the modulation of CAT and APX in plants under major abiotic stresses; and finally, (e) to consider a brief cross-talk on the CAT and APX, and this also highlights the aspects unexplored so far.     

In situ treatment of a dilute chlorinated solvent plume in an acidic aerobic aquifer

In situ bioremediation was selected in the Record of Decision (ROD) as the remedial technology for a 29‐acre dilute, acidic and aerobic, chlorinated solvent plume (principally trichloroethylene [TCE] and 1,1‐dichloroethylene) for a Superfund site located in central New Jersey. Implementation of the remedy at full‐scale began in late 2010, using reductive dechlorination and bioaugmentation, and treatment has continued steadily over the last 9 years. The amendments injected include electron donor and alkaline (bicarbonate) buffer solution and, once anaerobic aquifer conditions became established, a bioaugmentation culture. Amendment injections occurred in multilevel injection wells (IWs), to maintain control over the vertical interval of amendment delivery. The areal coverage of the plume has been reduced by 59% based on the 10 µg/L TCE isocontour and the contaminant mass has been reduced by 79% through the 9 years of treatment. Lessons learned from this project include the need for bioaugmentation in the acidic aquifer and an efficient and effective manner of well construction and amendment injection using multiscreen single casing IWs and packer systems. Additional lessons learned include differences in longevity of the electron donor amendment versus the bicarbonate neutralization additive, and the need for varied amendment delivery techniques (IWs, direct injection, horizontal well installation) in selected lower permeable zones to attain treatment.     

Highly charged swelling mica reduces Cu bioavailability in Cu-contaminated soils

This is the first test of a highly charged swelling mica's (Na-2-mica) ability to reduce the plant-absorbed Cu in Cu-contaminated soils from Chile. Perennial ryegrass (Lolium perenne L.) was grown in two acid soils (Sector 2: pH 4.2, total Cu = 172 mg Cu kg⁻¹ and Sector 3: pH 4.2, total Cu = 112 mg Cu kg⁻¹) amended with 0.5% and 1% (w/w) mica, and 1% (w/w) montmorillonite. At 10 weeks of growth, both mica treatments decreased the shoot Cu of ryegrass grown in Sector 2 producing shoot Cu concentrations above 21-22 mg Cu kg⁻¹ (the phytotoxicity threshold for that species), yet the mica treatments did not reduce shoot Cu concentrations when grown in Sector 3, which were at a typical level. The mica treatments improved shoot growth in Sector 3 by reducing free and extractable Cu to low enough levels where other nutrients could compete for plant absorption and translocation. In addition, the mica treatments improved root growth in both soils, and the 1% mica treatment reduced root Cu in both soils. This swelling mica warrants further testing of its ability to assist re-vegetation and reduce Cu bioavailability in Cu-contaminated surface soils.     

Contamination from electrically conductive silicone tubing during aerosol chemical analysis

Electrically conductive silicone tubing is used to minimize losses in sampling lines during the analysis of airborne particle size distributions and number concentrations. We report contamination from this tubing using gas chromatography–mass spectrometry (GC–MS) of filter-collected samples as well as by particle mass spectrometry. Comparison of electrically conductive silicone and stainless steel tubing showed elevated siloxanes only for the silicone tubing. The extent of contamination increased with length of tubing to which the sample was exposed, and decreased with increasing relative humidity.