Characterization of urease activity in three marine phytoplankton species,<Emphasis Type="Italic"> Aureococcus anophagefferens</Emphasis>,<Emphasis Type="Italic"> Prorocentrum minimum</Emphasis>, and<Emphasis Type="Italic"> Thalassiosira weissflogii</Emphasis>

The availability of different forms of nitrogen in coastal and estuarine waters may be important in determining the abundance and productivity of different phytoplankton species. Although urea has been shown to contribute as much as 50% of the nitrogen for phytoplankton nutrition, relatively little is known of the activity and expression of urease in phytoplankton. Using an in vitro enzyme assay, urease activities were examined in laboratory cultures of three species: Aureococcus anophagefferens Hargraves et Sieburth, Prorocentrum minimum (Pavillard) Schiller, and Thalassiosira weissflogii (Grunow) Fryxell et Hasle. Cultures of P. minimum and T. weissflogii were grown on three nitrogen sources (NO₃^m, NH₄⁺, and urea), while A. anophagefferens was grown only on NO₃^m and urea. Urease was found to be constitutive in all cultures, but activity varied with growth rate and assay temperature for the different cultures. For A. anophagefferens, urease activity varied positively with growth rate regardless of the N source, while for P. minimum, urease activity varied positively with growth rate only for cultures grown on urea and NH₄⁺. In contrast, for T. weissflogii, activity did not vary with growth rate for any of the N sources. For all species, urease activity increased with assay temperature, but with different apparent temperature optima. For A. anophagefferens, in vitro activity increased from near 0-30°C, and remained stable to 50°C, while for P. minimum, increased in vitro activity was noted from near 0-20°C, but constant activity was observed between 20°C and 50°C. For T. weissfloggii, while activity also increased from 0°C to 20°C, subsequent decreases were noted when temperature was elevated above 20°C. Urease activity had a half-saturation constant of 120-165 wg atom N l^у in all three species. On both an hourly and daily basis, urease activity in A. anophagefferens exceeded nitrogen demand for growth. In P. minimum, urease activity on an hourly basis matched the nitrogen demand, but was less than the demand on a daily basis. For T. weissflogii, urease activity was always less than the nitrogen demand. These patterns in urease activity in three different species demonstrate that while apparently constitutive, the regulation of activity was substantially different in the diatom. These differences in the physiological regulation of urease activity, as well as other enzymes, may play a role in their ecological success in different environments.     

Structure and function of the third maxillipeds of the banana prawn Penaeus merguiensis

The functions of the third maxilliped of Penaeus merguiensis de Man are described. It has a 6-segmented endopodite which is used in feeding, grooming and possible pheromone reception. In feeding, large pieces of food are gripped by the stout spines on inner borders of the ischia which hold them to the mouth so that particles can be torn off and ingested. All the distal segments have long setae used in grooming chelate pereiopods and the antennules. In mature males there is a tuft of about 300 slender setae at the end of the propus, but its function remains obscure.     

Air pollution in Athens basin and health risk assessment

An inventory of air pollution sources within the Athens basin is carried out for the years 1989, 1992 and 1998 and the results areinputted in a climatological model for predicting ambient concentrations. Despite of the significant growth in the numberof road vehicles and the deteriorating traffic, the emissions andambient concentrations of fine particulates, CO, NO_x and VOCappear to remain reasonably constant over for the period 1989 to 1998, while these of SO₂ and Pb are reduced, mainly due to the renewal of vehicle fleet, the use of catalytic technologies and the improved quality of the used fuel. The results further indicate that for CO, NO_x and VOC the major source is road traffic, while for PM_2.5 and SO₂ both space heating andtraffic share responsibility. The air pollutant concentrations monitored by the network of 11 stations are reviewed and statistics related to air quality guidelines are presented. As fine particulate levels are not monitored, approximate PM_2.5and PM₁₀ concentrations are derived from black smoke ones on basis of experimentally determined conversion factors. The computed and monitored air pollution levels are compared and found in reasonable agreement. The results of the above analysisshow that the levels of all `classical' pollutants, with the exception of SO₂ and Pb, exceed significantly the WHO guidelines and are thus expected to exert a significant healthimpact. The latter could be quantified in relation to the PM_2.5 or PM₁₀ levels on the basis of risk assessment information developed by the World Health Organization (WHO). The results show that the existing levels of fine particle concentrations in Athens increase significantly the mortality and morbidity, and reduce the average longevity of the entirepopulation from 1.3 to 1.7 years.     

The heterogeneous composition of working place aerosols in a nickel refinery: a transmission and scanning electron microscope study

Size, morphology and chemical composition of individual aerosol particles collected in a nickel refinery were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis (EDX). The phase composition was determined by selected area electron diffraction and EDX in a transmission electron microscope. Most particles are heterogeneous on a nanometer scale and consist of various phases. Nickel phases observed in the roasting and anode casting departments include metallic nickel, bunsenite (NiO), trevorite (Ni,Cu)Fe2O4, heazlewoodite Ni3S2, godlevskite (Ni,Cu)9S8, orthorhombic NiSO4 and an amorphous Ni,Cu.Al,Pb sulfate of variable composition. Additional phases encountered include corundum (Al2O3), murdochite (PbCu6O8), hexagonal Na2SO4, anhydrite (CaSO4), graphite (C) and amorphous carbon. The implications of the occurrence of the different Ni phases and their nanometer size for the study of adverse health effects are explored.     

Development of perfluorocarbon tracer technology for underground leak location

A method has been developed for the atmospheric sampling and analysis of four perfluorocarbon tracer (PFT) compounds simultaneously at the parts per trillion (ppt) level. PFTs were pre-concentrated using adsorbent tube air sampling. Analysis was achieved by thermal desorption (TD) and gas chromatography (GC) with electron capture detection (ECD). Efficient separation of the PFTs from the other sample constituents was achieved by use of a capillary porous layer open tubular (PLOT) GC column without the need to cool the GC oven to sub-ambient temperatures using liquid coolants (M. de Bortoli and E. Pecchio, J. High Resolut. Chromatogr., 1985, 8, 422) or for a catalytic destruction step to remove interferents (T. W. D'Ottavio, R. W. Goodrich and R. N. Dietz, Environ. Sci. Technol., 1986, 20, 100). Results from test field trials with two volatile PFTs that were buried to simulate an underground leaking cable were successful. The PFTs were detected above ground level to pinpoint the leak position. The highest tracer concentrations were detected within 1 m of the simulated leak positions 2 days after tracer burial. The developed technology was applied to an oil leaking high voltage electricity cable. One PFT was added to the cable oil which enabled detection of the oil leak to within 3 m. The reported method has many advantages over currently used leak detection methods and could, in the future, be applied to the detection of underground leaks in a variety of cables and pipes.     

Large-scale production of poly(3-hydroxyvaleric acid) by fermentation ofChromobacterium violaceum,processing, and characterization of the homopolyester

A fed-batch process was developed, which allowed biotechnological production of the homopolyester poly(3-hydroxyvaleric acid) [poly(3HV)], in a mineral salts medium containing valeric acid as carbon source and complex nutrients as supplements byChromobacterium violaceum at a 10- and 300-L fermentation scale. This process yielded up to 40 g dry cell matter per L fermentation broth, and the cells contained up to 70% (w/w) poly(3HV). Poly(3HV), which was extracted from the cells with chloroform and was precipitated from this solvent with ethanol, was processed to test bars by injection molding or by press processing and to fibers by melt spinning. The unprocessed and processed poly(3HV) material was characterized with respect to the molecular weight and with respect to thermal, rheological, and mechanical properties. It was shown that it is possible to process biodegradable poly(3HV) thermoplastically and to obtain a polymer suitable for applications with low strength requirements.     

The “data-rich but information-poor” syndrome in water quality monitoring

Water quality monitoring conducted routinely over time at fixed sites has been a part of most water quality management efforts for many years. It has been assumed that such monitoring plays a major role in management. However, the lack of routine data analysis, and reporting of information derived from such analysis, points up the fact that the exact nature of the role of routine, fixed-station monitoring is poorly defined.There is a need to very clearly define this role in the design of such systems if routine monitoring is to efficiently and effectively meet the information expectations placed on it. Design of routine monitoring systems will therefore have to consider not only the where, what, and when of sampling, but also why. A framework for including the why of monitoring in the design process is proposed and experience with using the framework in New Zealand is discussed.     

Preventing highway crashes by raising the legal minimum age for drinking: An empirical confirmation

In recent years there has been increased interest in reducing the massive social costs due to alcohol-related motor vehicle crashes. Raising the legal minimum age for purchase and consumption of alcohol beverages has been proposed as one way to reduce alcohol-related crashes among young drivers. Currently, many states are raising the legal age, in contrast to the trend towards lower legal drinking ages in the early 1970s. Recent studies of the effects of raising the drinking age are reviewed, and results from a controlled multiple time-series evaluation of the experience in Michigan are presented. Significant 11 to 28% reductions in alcohol-related crash involvements are shown to be attributable to the raised drinking age in Michigan. Suggestions for further research and discussion of policy implications are included.