Evaluation of cetacean exposure to organotin compounds in Brazilian waters through hepatic total tin concentrations

In Brazil, there is no restriction to the use of organotins (OTs). Previous investigations have shown that hepatic ∑Sn in cetaceans is predominantly organic. Hepatic ∑Sn concentrations were determined by GFAAS in 67 cetaceans (13 species) that stranded on Rio de Janeiro (RJ) and Espirito Santo (ES) states. Concentrations (in ng/g wet wt.) of marine tucuxis (n = 20) from the highly contaminated Guanabara Bay (in RJ) varied from 1703 to 9638. Concentrations of three marine tucuxi foetuses and one newborn calf (all from Guanabara Bay) varied between 431 and 2107. Contrastingly, the maximum level among 19 oceanic dolphins was 346, and 15 out of these 19 specimens presented concentrations below detection limit. The levels of Sn in six marine tucuxis from a less contaminated area (ES) varied from below detection limit to 744. Comparing to the literature, coastal cetaceans from Brazil appear to be highly exposed to OTs.     

Biogenic cements from rice hull ash doped with aluminum and iron

This work describes the use of rice hull as starting material for the synthesis of cements doped with iron and aluminum. Rice hull contains about 10-20% of silica along with organic material. In many countries rice hull represents an environmental problem since this material is merely burned at rice fields, rendering suspended silica particles in the air. Dicalcium silicate (beta-Ca(2)SiO(4)) is the second most important component of Portland cement and presents many environmental advantages over commercial cement. It can be prepared at lower temperatures saving energy and raw-materials. In this work we describe the synthesis beta-Ca(2)SiO(4) using silica derived from rice hull ash. Silica was obtained from heating rice hull at 600 degrees C. Starting materials (silica, calcium oxide, barium chloride, iron or aluminum oxide) were weighed in stoichiometric proportions and aqueous dispersions having water:solid ratio of approximately 20:1 were prepared and treated in an ultrasonic bath for 60min. After this, an intermediate silicate and the excess of calcium hydroxide were obtained. Finally solids were dried, grounded and heated up to 800 degrees C. It was observed that beta-Ca(2)SiO(4) was obtained when dopant concentration was limited to 1%.     

On the effect of MSW moisture content on meeting target recycling rates

A mathematical model to calculate the recycle rates for packaging materials from the municipal solid wastes (MSW) built from the dry mass values that are obtained from the corresponding wet masses and their respective moisture contents is presented in this work. A possible universal methodology is also described to be used with the previous model so that reliable comparisons between indicators for different regions are feasible. Furthermore, this mathematical model demonstrates the effect of the moisture content of packaging materials on their recycling rates and constitutes a fundamental tool for operators and persons responsible for MSW management to define new policies and technical measures viewing the improvement of recycling rates. A theoretical study and the application of the model to the MEMSW of the Lisbon region shows that the moisture content of the mixed wastes plays a dominant role in the recycling rates of packaging materials such as paper, plastics and glass. Moreover, accounting for all relevant masses in the dry basis yields higher recycling rate values: increases of 32.8% for paper, 50% for plastics and 44.6% glass are observed.     

Evolution of biodegradation of deinking by-products used as alternative cover material

Deinking by-products (DBP) have been used as alternative cover material for landfills and mine tailings. Since DBP is biodegradable because of its high cellulose and hemicellulose content, a laboratory experimental program was performed to monitor the evolution of biodegradation and changes in the physico-chemical and geotechnical properties of DBP samples submitted to accelerated biodegradation for 1460 days at 38 degrees C. The evolution of gas and leachate production was monitored in terms of both quality and quantity, which allowed for the calculation of mass loss with time. Under the conditions of the tests (no load applied), 19.6% of the mass was lost as gas, whereas 6.1% was leached out. The results show that biodegradation did not significantly alter the compaction behavior of DBP. The void ratio and water content increased significantly, while the volume of the samples slightly decreased. This seem to indicate that the porous structure of the samples was no longer the same after 1460 d of accelerated biodegradation. A slight increase in the relative density indicates that the organic/inorganic matter ratio increased. The results of permeability tests performed with samples at various stages of biodegradation and at various confining stresses show that the saturated hydraulic conductivity of recompacted biodegraded DBP decreased from 7 x 10(-7)cm/s to approximately 2 x 10(-7)cm/s, as biodegradation advanced.     

A review of regulatory decisions for environmental protection: part II - the case-study of contaminated land management in Portugal

This paper provides a case-study analysis of the challenges in the implementation of national soil policies, which was developed by the authors in Part I of the review of regulatory decisions for environmental protection [Rodrigues SM, Pereira ME, Ferreira da Silva E, Hursthouse A, Duarte AC. A review of regulatory decisions for environmental management: Part I-challenges in the implementation of national soil policies. Environ Int 2009. doi:10.1016/j.envint.2008.08.007]. The Portuguese case was selected as a case-study since specific regulatory decisions for contaminated land management are still in the early stages of development. Given the gap between the situation at the EU level and the state of Portuguese soil policy development, it is of merit to consider national contaminated land policy regimes already in place within the EU and to see if these provide a suitable basis to define the main challenges and research needs for the implementation of a Portuguese contaminated land management strategy. A framework combining the D-P-S-I-R (drivers-pressures-sources-impacts-responses) structure of policy evaluation with the Source-Pathway-Receptor approach to health risk assessment is proposed to derive an effective regulatory framework for managing contaminated land in Portugal, using available information and only to develop new data and research where knowledge gaps exist. Funding site clean-up and assigning liability were identified as relevant factors currently hampering site remediation. Most relevant research needs for the development of contaminated land management practices in Portugal are those associated to the definition of a risk assessment framework and setting guidelines for the evaluation of risks posed to both humans and ecosystems. Other relevant and innovative features are the integration of soil function analysis into site investigations and the definition of a framework that combines risk assessment with soil function analysis. The analysis of the Portuguese case also provides insight into the discussions needed for the effective development of regulatory decisions for contaminated land management in countries with no history of implementing specific soil policies.     

The relevance of physical forces on land-use change and planning process

This study analysed the importance of physical forces on land-use change, on the planning framework in a Portuguese periurban area. A temporal matrix showing the trajectories of land transformation was obtained. A multivariate redundancy analysis explored the importance of physical parameters on temporal and spatial land-use change. A content analysis on urban or municipal master plans was made framing the importance of physical parameters on the planning process. The results highlighted a consistent trajectory of profound land-use changes with distinctive trajectories, with increasingly complex patterns with a limited dependence on physical variables. The trajectories were more related to the planning framework, where political actors and planning managers seemed to be most important. A theoretical model balancing three main components – physical forces, actors, and land transformation (DFA-C model) is proposed, reflecting the informal relationships between physical parameters and actors during the planning process.     

Bioassays for the evaluation of reclaimed opencast coal mining areas

Environmental Science and Pollution Research - This study aimed to use bioassays (single and multispecies) with organisms from different trophic levels to assess soil quality in reclaimed coal...     

Deficiency of essential elements in volcanic soils: potential harmful health effects on grazing cattle

Environmental Geochemistry and Health - Several essential nutrients such as Fe, Co, Cu, I, Se, and Zn are vital to grazing cattle as they play a significant role in intracellular enzyme systems,...     

Screening of new adsorbents to remove algal organic matter from aqueous solutions: kinetic analyses and reduction of disinfection by-products formation

Environmental Science and Pollution Research - The algal organic matter (AOM) is a problem in water treatment. Although the adsorption process is extensively applied to drinking water treatment,...     

Mapping Locust Habitats in the Amudarya River Delta,Uzbekistan with Multi-Temporal MODIS Imagery

Reed beds of Phragmites australis in the River Amudarya delta near the Aral Sea constitute permanent breeding areas of the Asian Migratory locust, Locusta migratoria migratoria. Every year, thousands of hectares are treated with broad-spectrum insecticides to prevent locust swarms from damaging crops in adjacent areas. To devise efficient locust monitoring and management plans, accurate and updated information about the spatial distribution of reeds is necessary. Given the vast geographic extent of the delta, traditional, ground survey methods are inadequate. Remotely sensed data collected by the MODIS sensor aboard the TERRA satellite provide a useful tool to characterize the spatial distribution of reeds. Multi-temporal MODIS data, collected at different times of the growing season, were used to generate spectral-temporal signatures for reeds and other land cover classes. These spectral-temporal signatures were matched with reed phenology. MODIS information was digitally classified to generate a land cover map with an overall accuracy of 74%. MODIS data captured 87% of the ground-verified reed locations. Estimates derived from MODIS data indicate that 18% of the study area was covered by reeds. However, high commission error resulted from misclassification of reeds mixed with shrubs class and shrubs class as reeds. This could have resulted in overprediction of the area covered by reeds. Additional research is needed to minimize the overlap between reeds and other vegetation classes (shrubs, and reed and shrub mix). Nevertheless, despite its relatively low spatial resolution (250 m), multi-temporal MODIS data were able to adequately capture the distribution of reeds. Instead of blanketing the fragile wetland ecosystem of the Amudarya delta with chemical anti-locust treatments, plant protection specialists can use this information to devise ecologically sound pest management plans aimed at reducing the adverse environmental impact in the zone of the Aral Sea ecological catastrophe. MODIS methodology to identify reed stands can be applicable to the Migratory locust habitats in other geographic areas.