Distribution of common dolphins (Delphinus spp.) in the western Atlantic Ocean: a critical re-examination

Due to indications that misidentification (largely confusion among dolphins of the genera Delphinus and Stenella) in the past had led to erroneous assumptions of distribution of the two species of common dolphins (Delphinus delphis and D. capensis) in the western Atlantic Ocean, we conducted a critical re-examination of records of the genus Delphinus from this region. We compiled 460 ‘plottable’ records, required support for confirmation of genus and species identifications, and found many records lacking (and some clearly misidentified). When we plotted only the valid records (n = 364), we found evidence of populations in only three areas, and apparent absence throughout much of the tropical/subtropical regions. Off the east coast of the US and Canada, D. delphis is found from the Georgia/South Carolina border (32°N) north to about 47–50°N off Newfoundland. Since the 1960s, they have apparently been absent from Florida waters. There is no evidence that dolphins of the genus occur in the Gulf of Mexico. Reports of common dolphins from most of the Caribbean Basin are also rejected, and the only place in that region where they are confirmed to occur is off central-eastern Venezuela (a coastal D. capensis population). Off eastern South America, common dolphins appear to be restricted to south of 20°S. There is a coastal long-beaked population found in the South Brazil Bight, and one or more short-beaked populations south and offshore of this (ranging south to at least northern Argentina). The results are very different from commonly-accepted patterns of distribution for the genus in the Atlantic. Most areas of distribution coincide with moderate to strong upwelling and common dolphins appear to avoid warm, tropical waters. This study shows that great care must be taken in identification of similar-appearing long-beaked delphinids, and that uncritical acceptance of records at face value can lead to incorrect assumptions about the ranges of the species involved.     

A multi-scale approach to modelling spatial and dynamic ecological patterns for reservoir's water quality management

With growing levels of urbanization and agriculture throughout the world, it is increasingly important that both research and management efforts take into account the effects of this widespread landscape alteration and its consequences for natural systems. Freshwater ecosystems, namely reservoirs, are particularly sensitive to land use changes. In this context, modelling can be very useful, for decision support, as an investigative tool to forecast the outcome of various scenarios, to guide current management in order to meet future targets and to develop integrated frameworks for management accordingly to the Water Framework Directive (WFD). The present paper examined the applicability of a holistic Stochastic-Dynamic Methodology (StDM), coupled with a Cellular Automata (CA) model, in capturing how expected changes at land use level will alter the ecological status of lentic ecosystems, namely at physicochemical and biological levels. The methodology was applied to Portuguese reservoirs located in the Douro's basin and illustrated with a series of stochastic-dynamic and spatial outputs taking into account expected scenarios regarding land use changes. Overall, the simulation results are encouraging since they seem to demonstrate the tool reliability in capturing the stochastic environmental dynamics of the selected metrics facing spatial explicit scenarios. The ultimate goal was to couple monitoring assessment and the described modelling techniques to ease management and decision making regarding the practical implementation of the WFD, both at the scale of the reservoir body and at the scale of the respective river watershed dynamics.     

Turbulence characteristics within sparse and dense canopies

Boundary layer interactions with canopies control various environmental processes. In the case of dense and homogeneous canopies, the so-called mixing layer analogy is most generally used. When the canopy becomes sparser, a transition occurs between the mixing layer and the boundary layer perturbed by interactions between element wakes. This transition has still to be fully understood and characterized. The experimental work presented here deals with the effect of the canopy density on the flow turbulence and involves an artificial canopy placed in a fully developed turbulent boundary layer. One and two-component velocity measurements are performed, both within and above the canopy. The influence of the spacing between canopy elements is studied. Longitudinal velocity statistical moments and Reynolds stresses are calculated and compared to literature data. For spacings greater than the canopy height, evidences of this transition are found in the evolution of the skewness factor, shear length scale and mixing length.     

Effects of remarriage after widowhood on long-term fitness in a monogamous historical human population

The fitness benefits of multiple mating determine the strength of sexual selection in each sex. This is traditionally quantified by the number of offspring born to once versus multiply mated individuals. In species with (bi)parental care, however, this measure may overestimate the benefits of multiple mating since having several mates can increase offspring number but decrease offspring quality. We analyzed short- and long-term fitness consequences of multiple marriages for both sexes in humans in preindustrial Finnish populations, where monogamy was socially enforced and remarriage was possible only after widowhood. Remarriage increased the lifetime number of offspring sired by men by lengthening their reproductive span but was unrelated to the lifetime number of births for women. However, neither men's nor women's long-term fitness, measured as their number of grandchildren, was significantly increased or decreased by remarriage. These associations were not modified by individual wealth. Our results suggest that despite increasing the number of offspring sired by men, the long-term fitness benefits of serial monogamy may be negligible for both sexes when parental investment is crucial for offspring success and continues to adulthood. They also demonstrate the importance of incorporating long-term fitness measures when quantifying the benefits of mating and reproductive strategies.     

Calibration and validation of an integrated nitrate transport model within a well capture zone

Groundwater contamination by nitrate was investigated in an agricultural area in southern Quebec, Canada, where a municipal well is the local source of drinking water. A network of 38 piezometers was installed within the capture zone of the municipal well to monitor water table levels and nitrate concentrations in the aquifer. Nitrate concentrations were also measured in the municipal well. A Water flow and Nitrate transport Global Model (WNGM) was developed to simulate the impact of agricultural activities on nitrate concentrations in both the aquifer and municipal well. The WNGM first uses the Agriflux model to simulate vertical water and nitrate fluxes below the root zone for each of the seventy agricultural fields located within the capture zone of the municipal well. The WNGM then uses the HydroGeoSphere model to simulate three-dimensional variably-saturated groundwater flow and nitrate transport in the aquifer using water and nitrate fluxes computed with the Agriflux model as the top boundary conditions. The WNGM model was calibrated by reproducing water levels measured from 2005 to 2007 in the network of piezometers and nitrate concentrations measured in the municipal well from 1997 to 2007. The nitrate concentrations measured in the network of piezometers, however, showed greater variability than in the municipal well and could not be reproduced by the calibrated model. After calibration, the model was validated by successfully reproducing the decrease of nitrate concentrations observed in the municipal well in 2006 and 2007. Although it cannot predict nitrate concentrations in individual piezometers, the calibrated and validated WNGM can be used to assess the impact of changes in agricultural practices on global nitrate concentrations in the aquifer and in the municipal well.     

Is BDE-175 an important enough component of commercial octabromodiphenyl ether mixtures to be listed in Annex A of the Stockholm Convention?

Commercial octabromodiphenyl ether mixtures, containing hexabromodiphenyl ethers and heptabromodiphenyl ethers were listed in Annex A of the Stockholm Convention on May 2009 (Fourth Conference of the Parties) (UNEP, 2009a). Four compounds are specifically mentioned: 2,2′,4,4′,5,5′-hexabromodiphenyl ether (BDE-153), 2,2′,4,4′,5,6′-hexabromodiphenyl ether (BDE-154), 2,2′,3,3′,4,5′,6-heptabromodiphenyl ether (BDE-175), and 2,2′,3,4,4′,5′,6-heptabromodiphenyl ether (BDE-183). Presumably they were identified as key components of commercial mixtures and found to be present in environmental samples. However, since BDE-175 and BDE-183 co-elute on common HRGC columns, the presence of BDE-175 as an important component in technical octa-BDE mixtures has not been illustrated. The successful HRGC/LRMS separation of a 1:1 mixture of BDE-175 and BDE-183, as well as ¹H NMR analysis of technical material, has allowed us to confirm that this congener is not present in technical products (e.g. Great Lakes DE-79™) in quantifiable amounts.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Kinetic analysis of constructed systems for the recovery of contaminated areas by acid mine drainage

INTRODUCTION: Flowing of the acid mine drainage may contaminate the adjacent water bodies causing substantial changes in the aquatic ecosystem. This aspect is the most relevant problem in the southern of Santa Catarina once the contaminated areas are inserted in the watershed of the Araranguá, Urussanga, and Tubar?o rivers, increasing the need for recovery studies. These areas are between Criciúma, I?ara, Urussanga, Siderópolis, Lauro Müller, Orleans, and Alfredo Wagner towns where a conservation unit exist called the Environmental Preservation Area of Baleia Franca. Aiming to compare the kinetics of the ash derived from burning coal and to neutralize acid mine drainage, different neutralizer, limestone, fly, and bottom ash, was mounted on a pilot scale experiment. DISCUSSION: The transport parameters showed the same order of infiltration and dispersion: fly ash < bottom ash < limestone. The order of measured alkalinity was: limestone < fly ash < bottom ash, with pH values of 9.34, 12.07, and 12.25, respectively. The limestone kinetics of acidic drainage neutralization was first order with reaction rate constant k?=?0.0963 min(-1), bottom ash was 3/4 with k?=?0.0723 mol(1/4) L(-1/4) min(-1), and the fly ash had higher order kinetics, 4/3, with reaction rate constant k?=?27.122 L(1/3) mol(-1/3) min(-1). However, by mathematical modeling, it was found that due to a combination of transport and kinetics, only limestone treatment reached a pH above 6 within 5 years, corresponding to the ideal as planned.     

Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.