Fetal curarization for prenatal magnetic resonance imaging

Fetal magnetic resonance (MR) imaging was performed at 33 weeks of gestation for investigation of a posterior fossa abnormality found at ultrasound screening. Fetal movements were abolished by vecuronium injected under ultrasound guidance into the umbilical vein. MR images showed atrophy of the left cerebellar lobe with cisternal dilatation. These were confirmed postnatally by CT scan.     

Microbiological aspects of humid husk composting

The feasibility of composting as disposal practice of husk mixed with olive mill wastewaters (OMW) was studied in the present research. The process was investigated with regards to some reliable and easy to be determined microbial activity parameters such as the ATP content, the activity of a pool of enzymes and the viable counts, keeping in mind the well known bias of this last technique. Two different composting technologies were compared: static pile and reactor by studying the cured composts obtained. Among the bioindicators tested, the composting process trend was described better by the ATP content and the activity of some enzymes. In fact, the ATP content showed an increase during the thermophilic phase in both the pile and the reactor, and decreased at the end of the process, it was also higher in the bioreactor-pile technology than in the pile. With regard to the enzymatic activity, with the reactor technology experiment, two peaks were evidenced in the thermophilic phase and during the curing phase in pile, and a drop during the transfer of material from the reactor to the pile. The quality of the cured product obtained using the reactor technology has been evaluated considering phytoxicity and hygienic features: the stabilised compost resulted to have neither phytoxical effect, nor faecal indicator contaminants.     

Cellular localisation of secondary metabolites isolated from the Caribbean sponge <Emphasis Type="Italic">Plakortis simplex</Emphasis>

The Caribbean sponge, Plakortis simplex, is known to contain a large array of secondary metabolites, including the antimalarial polyketide plakortin, several unusual glycolipids, and some hopanoids, which closely resemble typical bacterial metabolites. The hypothesis that they could be products of bacterial metabolism was tested by localizing specific metabolites in cells using physical separation of sponge cells, bacterial symbionts and supernatant by differential centrifugation. The obtained fractions were analysed separately for the typical P. simplex metabolites by NMR and mass spectrometry, and most of them were shown to be present in the bacterial cells but not in the sponge cells. In addition, PCR screening showed that the biosynthetic pathway for glycosphingolipids was present in the bacterial cells. Isolation of a Sphingomonas strain PS193 from P. simplex and subsequent glycosphingolipid analysis resulted in the detection of a known glycosphingolipid, GSL-1, that did, however, not match the glycosphingolipid profile of P. simplex. Therefore, it is unlikely that Sphingomonas strain PS193 is an abundant member of the microbial community associated with P. simplex. Other glycosphingolipid producing bacteria in P. simplex remain to be identified. In conclusion, this study provides experimental evidence that the glycolipids and hopanoids and possibly also the polyketide plakortin are produced by microbial symbionts rather than the sponge from which the metabolites were originally isolated.     

Arsenic, Cadmium, Lead, and Mercury in surface soils, Pueblo, Colorado: implications for population health risk

Decades of intensive industrial and agricultural practices as well as rapid urbanization have left communities like Pueblo, Colorado facing potential health threats from pollution of its soils, air, water and food supply. To address such concerns about environmental contamination, we conducted an urban geochemical study of the city of Pueblo to offer insights into the potential chemical hazards in soil and inform priorities for future health studies and population interventions aimed at reducing exposures to inorganic substances. The current study characterizes the environmental landscape of Pueblo in terms of heavy metals, and relates this to population distributions. Soil was sampled within the city along transects and analyzed for arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb). We also profiled Pueblo’s communities in terms of their socioeconomic status and demographics. ArcGIS 9.0 was used to perform exploratory spatial data analysis and generate community profiles and prediction maps. The topsoil in Pueblo contains more As, Cd, Hg and Pb than national soil averages, although average Hg content in Pueblo was within reported baseline ranges. The highest levels of As concentrations ranged between 56.6 and 66.5 ppm. Lead concentrations exceeded 300 ppm in several of Pueblo’s residential communities. Elevated levels of lead are concentrated in low-income Hispanic and African-American communities. Areas of excessively high Cd concentration exist around Pueblo, including low income and minority communities, raising additional health and environmental justice concerns. Although the distribution patterns vary by element and may reflect both industrial and non-industrial sources, the study confirms that there is environmental contamination around Pueblo and underscores the need for a comprehensive public health approach to address environmental threats in urban communities.     

Development of a Dynamic Aquatic Model (DynA Model): Estimating Temporal Emissions of DDT to Lake Maggiore (N. Italy)

- DOI: http://dx.doi.org/10.1065/espr2006.01.009 Background, Aims and Scope Most existing models used to describe the fate of chemicals in surface water and sediment generally consider a 'static scenario', in which a contaminant is discharged at a constant rate and environmental input parameters do not change during the simulation time. This approach is not suitable in environmental scenarios characterized by daily or periodic changes of several input parameters. The aim of this study is to estimate approximate emissions of DDT lo Lake Maggiore using a new surface water model, (DynA Model) that describes the fate of a chemical in a dynamic scenario. Methods The model is developed on the grounds of an existing and validated model (QWASI). A numerical solution was adopted to build the fully dynamic version of the model. Results and Discussion The model was applied to Lake Maggiore emitting DDT at a constant rate until steady-state was reached. Emissions were stopped and later sporadic 'pulse' emissions were added. This was done to calculate the amount of DDT needed to simulate concentrations close to those measured in water and sediments. This allowed the evaluation of the order of magnitude of emissions. An uncertainty analysis for sediment resuspension was also performed, given the lack of measured resuspension rates. Conclusion The model showed the time response of the Lake Maggiore system to varying emission scenarios and provided what are regarded as reasonable estimates of DDT emissions. The model demonstrated the importance of sediment-water exchange. Recommendation and Outlook In order to better calculate DDT concentrations the model should be run with different discharge scenarios to clarify the time trends of concentrations, possibly with the use of different sets of measured data (such as biota and sediment deposition/resuspension rates).     

Surface ozone comparison conducted in two rural areas in central-southern Spain

Purpose  

The purpose of this work is to contribute to the understanding of the photochemical air pollution analysing the levels and temporal variations of surface ozone in two rural areas situated in central-southern Spain.     

Behaviour and variability of local and regional oxidant levels (OX = O3 + NO2) measured in a polluted area in central-southern of Iberian Peninsula

The purpose of this work is to contribute to the understanding of the photochemical air pollution in central-southern of the Iberian Peninsula, analysing the behaviour and variability of oxidant levels (OX?=?O₃?+?NO₂), measured in a polluted area with the highest concentration of heavy industry in central Spain. A detailed air pollution database was observed from two monitoring stations. The data period used was 2008 and 2009, around 210,000 data, selected for its pollution and meteorological statistics, which are very representative of the region. Data were collected every 15 min, however hourly values were used to analyse the seasonal and daily ozone, NO, NO₂ and OX cycles. The variation of OX concentrations with NO _x is investigated, for the first time, in the centre of the Iberian Peninsula. The concentration of OX was calculated using the sum of a NO _x -independent ‘regional’ contribution (i.e. the O₃ background), and a linearly NO _x -dependent ‘local’ contribution. Monthly dependence of regional and local OX concentration was observed to determine when the maximum values may be expected. The variation of OX concentrations with levels of NO _x was also measured, in order to pinpoint the atmospheric sources of OX in the polluted areas. The ratios [NO₂]/[OX] and [NO₂]/[NO _x ] vs. [NO _x ] were analysed to find the fraction of OX in the form of NO₂, and the possible source of the local NO _x -dependent contribution, respectively. The progressive increase of the ratio [NO₂]/[OX] with [NO _x ] observed shows a greater proportion of OX in the form of NO₂ as the level of NO _x increases. The higher measured values in the ratio [NO₂]/[NO _x ] should not be attributed to NO _x emissions by vehicles; they could be explained by industrial emission, termolecular reactions or formaldehyde and HONO directly emitted by vehicles exhausts. We also estimate the rate of NO₂ photolysis, J _NO2?=?0.18–0.64 min^?1, a key atmospheric reaction that influence O₃ production and then the regional air quality. The first surface plot study of annual variation of the daily mean oxidant levels, obtained for this polluted area may be used to improve the atmospheric photochemical dynamic in this region of the Iberian Peninsula where there are undeniable air quality problems.     

High-impact conservation: invasive mammal eradications from the islands of western México

Islands harbor a disproportionate amount of the earth's biodiversity, but a significant portion has been lost due in large part to the impacts of invasive mammals. Fortunately, invasive mammals can be routinely removed from islands, providing a powerful tool to prevent extinctions and restore ecosystems. Given that invasive mammals are still present on more than 80% of the world's major islands groups and remain a premier threat to the earth's biodiversity, it is important to disseminate replicable, scaleable models to eradicate invasive mammals from islands. We report on a successful model from western México during the past decade. A collaborative effort between nongovernmental organizations, academic biologists, Mexican government agencies, and local individuals has resulted in major restoration efforts in three island archipelagos. Forty-two populations of invasive mammals have been eradicated from 26 islands. For a cost of USD 21,615 per colony and USD 49,370 per taxon, 201 seabird colonies and 88 endemic terrestrial taxa have been protected, respectively. These conservation successes are a result of an operational model with three main components: i) a tri-national collaboration that integrates research, prioritization, financing, public education, policy work, capacity building, conservation action, monitoring, and evaluation; ii) proactive and dedicated natural resource management agencies; and iii) effective partnerships with academic researchers in Mexico and the United States. What is now needed is a detailed plan to eradicate invasive mammals from the remaining islands in the region that integrates the needed additional financing, capacity, technical advances, and policy issues. Island conservation in western Mexico provides an effective approach that can be readily applied to other archipelagos where conservation efforts have been limited.     

Dual <Superscript>14</Superscript>C/residue analysis method to assess the microbial accessibility of native phenanthrene in environmental samples

The aim of this work was to develop a method to assess the microbial accessibility of native phenanthrene present in soils and sediments. We developed an accelerated biodegradation assay, characterized by (a) inoculation with a sufficient number of phenanthrene-degrading microorganisms, (b) monitoring of the biodegradation activity through ¹⁴C-mineralization measurements, and (c) single-step chemical analysis of the native compound in the residue. The use of ¹⁴C-labeling allowed the determination of the time period needed for biodegradation of the bioaccessible fraction of the native chemical. The method was tested with environmental samples having a wide range of phenanthrene concentrations, i.e., from background levels (μg kg^-1) originating in soil from atmospheric deposition, to acute concentrations (g kg^-1) corresponding to industrial pollution of soils and sediments. The results showed a wide range of bioaccessibility (15–95% of the initial amount). The method can be used for the assessment of bioaccessibility involved in the management of polycyclic aromatic hydrocarbon (PAH) pollution.