Degradation of isofenphos in cornfields with conservation tillage practices 1

Abstract

Isofenphos (Amaze®, Oftanol®, 1‐methylethyl 2‐[[ethoxy‐[(l‐methylethyl)aminol phosphinothloyl]oxy]benzoate) was applied at planting to study the effects of four different tillage treatments (no‐tillage, fall chisel plow, Paraplow®, and fall moldboard plow) on isofenphos degradation rates and routes in cornfields over two growing seasons. Soil samples were taken at intervals extending over 69 days each growing season. Tillage treatment had no significant effect on isofenphos degradation rates and products. However, the repeated application of isofenphos had a very significant effect on lsofenphos degradation. Degradation was much more rapid the second year. A laboratory experiment comparing sterile and nonsterlle soils, with and without isofenphos history, confirmed enhanced mlcrobial degradation resulting from two consecutive years of isofenphos application. In the first year, isofenphos oxon was found at greater amounts relative to the second year. Soil bioassays conducted on soils collected from the field at different dates in the second year showed that effective control of larvae was no longer present 21 days after isofenphos application in the field.     

A novel lens of stock market capitalization and environmental degradation

Environmental Science and Pollution Research - This research article examines the impact of stock market capitalization on carbon emissions using forty high carbon-emitting countries from 1996 to...     

Catalytic evaluation of promoted CeO2-ZrO2 by transition, alkali, and alkaline-earth metal oxides for diesel soot oxidation

Series of mixed metal oxides were synthesized by gel-combustion method and their catalytic activities for soot oxidation were investigated. The catalysts were M-Ce-Zr （M = Mn, Cu, Fe, K, Ba, Sr）, and χK-20Mn-Ce-Zr （χ= 0, 5, 10, 20）, they were characterized by XRD, SEM, TPR and BET surface area techniques. The results of soot temperature programmed oxidation （TPO） in an O2 oxidizing atmosphere indicate that K-Ce-Zr has the highest catalytic activity for soot oxidation under loose contact condition, due to enhancement of the soot and catalyst contacts. On the other hand, under a tight contact condition, Mn-Ce-Zr and Cu-Ce-Zr nano-composites have high activities for soot oxidation and lower the soot TPO peak temperatures by about 280 and 270℃, respectively, as compared to non-catalytic soot oxidation. Furthermore, the addition of up to 10 wt.% potassium oxides into Mn-Ce-Zr increases its catalytic activity and further reduces the soot TPO peak temperature by about 40℃ under loose contact condition.     

Strategies to improve aerobic granular sludge stability and nitrogen removal based on feeding mode and substrate

A systemic strategy was proposed to improve aerobic granular sludge(AGS)stability and nitrogen(N)removal efficiency by optimizing feeding mode and substrate aiming at complicated wastewater characteristics.Key functional groups at the genus level identified by high-throughput sequencing were evaluated as well.The results showed that anaerobic feeding mode and acetate promoted the compact AGS formation with excellent total nitrogen(TN)removal efficiency(averaging 91.7%±4.1%)at various dissolved oxygen conditions.While the aerobic feeding mode led to a loose AGS structure with a vulnerable anaerobic core and poor TN removal efficiency(averaging58.8%±7.4%).Simultaneous nitrification and denitrification process played the dominant role in N removal in compact AGS over the alternating nitrification and denitrification process.High-concentration glucose undermined feast-famine condition with filamentous bacteria growth out of granule and decreased TN removal efficiency to 67.3%±15.2%.Lower food to microorganism ratio may result in a lower N removal rate attributed to the sharply increased biomass concentration fed by glucose.Ammonia-oxidizing bacteria,nitrite-oxidizing bacteria,denitrifying bacteria,and denitrifying phosphorus accumulation organisms enriched during AGS granulation also contributed to the efficient N removal.The proposed strategy provided insights into the relationship between various factors and stable AGS formation,and systemic operation methods for various complicated wastewater treatment.     

Classification and ordination of understory vegetation using multivariate techniques in the <Emphasis Type="Italic">Pinus wallichiana</Emphasis> forests of Swat Valley,northern Pakistan

An understory vegetation survey of the Pinus wallichiana-dominated temperate forests of Swat District was carried out to inspect the structure, composition and ecological associations of the forest vegetation. A quadrat method of sampling was used to record the floristic and phytosociological data necessary for the analysis using 300 quadrats of 10 × 10 m each. Some vegetation parameters viz. frequency and density for trees (overstory vegetation) as well as for the understory vegetation were recorded. The results revealed that in total, 92 species belonging to 77 different genera and 45 families existed in the area. The largest families were Asteraceae, Rosaceae and Lamiaceae with 12, ten and nine species, respectively. Ward’s agglomerative cluster analysis for tree species resulted in three floristically and ecologically distinct community types along different topographic and soil variables. Importance value indices (IVI) were also calculated for understory vegetation and were subjected to ordination techniques, i.e. canonical correspondence analysis (CCA) and detrended correspondence analysis (DCA). DCA bi-plots for stands show that most of the stands were scattered around the centre of the DCA bi-plot, identified by two slightly scattered clusters. DCA for species bi-plot clearly identified three clusters of species revealing three types of understory communities in the study area. Results of the CCA were somewhat different from the DCA showing the impact of environmental variables on the understory species. CCA results reveal that three environmental variables, i.e. altitude, slope and P (mg/kg), have a strong influence on distribution of stands and species. Impact of tree species on the understory vegetation was also tested by CCA which showed that four tree species, i.e. P. wallichiana A.B. Jackson, Juglans regia Linn., Quercus dilatata Lindl. ex Royle and Cedrus deodara (Roxb. ex Lamb.) G. Don, have strong influences on associated understory vegetation. It is therefore concluded that Swat District has various microclimatic zones with suitable environmental variables to support distinct flora.     

Saddle seat reduces musculoskeletal discomfort in microsurgery surgeons

Background. Microsurgery is a surgical procedure requiring a high degree of precision and is commonly facilitated through the use of an intraoperative microscope. When operating the microscope system, the long-term posture leads to musculoskeletal disorders in surgeons, and seats are commonly employed to diminish these problems. The present study was conducted to evaluate musculoskeletal discomfort during work with a saddle seat in comparison with conventional seats for microscopic work. Methods. Two types of seats, a saddle and a conventional one, were evaluated for 73 microsurgical surgeons in terms of musculoskeletal discomfort. Corlett and Bishop's body part discomfort scale was used to assess musculoskeletal discomfort before and after working with the seats. Results. The highest amount of discomfort that microsurgical surgeons acquire in the workplace was focused on their neck, shoulders, arms and back. During work with a saddle seat, a significant reduction was found for discomfort values in the neck, shoulder, arm, back, elbow and forearm, as well as the whole body (p?<?0.05). Conclusion. This study showed that the use of saddle seats provides a more appropriate physical posture at work, and can decrease musculoskeletal discomfort in different parts of the body of microsurgical surgeons.     

Slip safety risk analysis of surface properties using the coefficients of friction of rocks

This study was conducted to determine the most appropriate surface processing techniques (SPT), environmental conditions (EC) and surface roughness (SR) to minimize the risk of slipping when pedestrians walk on a floor covering of rocks barefoot and with shoes. Coefficients of friction (COFs) and values of SR were found using five different types of rocks, four SPT and two (ramp and pendulum) tests. Results indicate that the parameters which affect the COF values of rocks include SR, EC and SPT. Simple linear regression was performed to examine the relationship between the values of the COF and the SR. The value of the COF was identified as R²?≥?0.864. Statistical results, which are based on experimental measurements, show that rocks are classified according to their safe use areas depending on their COF and SR values.