Increased Levels of serum Pentraxin 3 in Critical Coronavirus Disease-2019 Patients

Environmental Science and Pollution Research - Pentraxin 3 (PTX3) and ficolin are the plasma phase of pattern recognition receptors (PRRs) and can activate complement through classical and lectin...     

Application of a Second-Order Kinetic Model to a Complex Melt Polymerization Reaction

A novel copolymer system has been synthesized using methyl hydroquinone diacetate (MHQDA), 1,4 naphthalene dicarboxylic acid (1,4 NDCA), and polybutylene terephthalate (PBT) using the melt polymerization technique. The optimum kinetic parameters pertinent to this system are reported in this study. A simple second-order reaction sequence summarizes catalyzed and uncatalyzed reactions between MHQDA, 1,4 NDCA, and PBT. The kinetic parameters for the copolymerization reaction were determined using a new second-order model. This technique was used to compute the moles of acetic acid generated in the polymerization process. The model was compared to that of the experimentally determined data. Close comparison (percentage error of less than 5%) was obtained between the experimental and theoretical data. The kinetic data support block copolyester formation. The thermal data also supports formation of block polymers.     

Preliminary assessment of indoor industrial noise pollution in Kuwait

Sound is considered as a pollutant when it exceeds undesirable limits for the recipient. One of the significant environmental problems associated with industries is noise pollution generated by machinery. The main objectives of this study were to measure noise levels generated by machinery that the workers were exposed to at five industrial facilities in the State of Kuwait. Also, to assess if these levels were within acceptable standards, for Kuwait lacks environmental standards for such a pollutant. To achieve the objectives of the study two food manufacturing companies, a cement-brick making plant, a furniture factory and a car washing facility were selected for the purpose of the research.The study showed that workers operating machinery at the five facilities were exposed to high noise levels without any kind of ear protection. Noise levels recorded during the study were very high and exceeded the British Noise at Work Regulations of 1989. In Kuwait there are no regulations to abate noise in the working environment and workers are not required to wear ear protective muffs. The results of the study indicate that, the concerned environmental and health organisations in Kuwait should be compelled to establish noise level standards and controls to safeguard the health of workers and the public at large.     

Dust exposures in tractor and combine operations in eastern Mediterranean, Turkey

The objective of this study was to determine the dust concentrations in selected tractor and combine operations in eastern Mediterranean region in Turkey Mean dust concentrations were 137.9 mg m(-3), 83.6 mg m(-3), 80.3 mg m(-3), and 88.8 mg m(-3) respectively for soil packing, furrowing, straw making, and baling on tractors with no cabins whereas 106.9 mg m(-3) was found in combines without cabins, which are much higher than the limit dust concentration (10 mg m(-3)) considered hazardous for workers' health. In tractor operations with field-installed cabins, mean dust concentrations were 5.6 mg m(-3), 6.6 mg m(-3), 6.4 mg m(-3), and 3.7 mg m(-3), respectively in soil packing, furrowing, straw making, and baling while 4.7 mg m(-3) was measured in combines with field-installed cabins. Considering unit-manufactured cabins, mean dust concentrations were 1.1 mg m(-3), 1.6 mg m(-3), 3.2 mg m(-3), and 1.4 mg m(-3) respectively in tractor operations, and 1.4 mg mr(-3) in combine operations. Variance analyses showed that not only the respiration environment of the workers but also the field operation had a significant effect on measured dust concentrations (p < 0.01). Pearson correlation coefficient was 0.74 (very strong level) between dust concentration and wind speed in soil packing, 0.46 (medium level) between dust concentration and wind speed in baling, and 0.44 (medium level) between dust concentration and ground speed in combining.     

Determination of metal accumulation in deposited street dusts in Amman, Jordan

Street dust samples (120 in total) were collected under stable weather conditions during the hot, dry season (August and September) of 2004 from six different localities (industrial, heavy traffic, medium traffic, light traffic, low traffic and rural) in greater Amman, the capital of Jordan. The concentrations of Fe, Cu, Cd, Pb, Zn and Ni in the dusts were determined by atomic absorption spectrophotometry. The high concentrations of Pb, Fe and Zn in the street dust samples were related to both anthropogenic (industrial sources combined with traffic sources) and natural sources. Surprisingly, the concentrations of Cd in the dusts were low. Correlation coefficient analysis and principle component analysis identified three main sources of these elements and the corresponding distributions. The elements Pb, Zn, Cd, Fe, Cu and Ni were mainly derived from industrial sources, with Pb and Zn additionally derived from traffic sources. The street dusts were found to have highly elevated levels of Zn, particularly along the main trunk roads, indicating that the Zn in the street dusts may be derived from traffic sources, especially vehicle tyres. The concentrations of metals in the different street dust samples were found to vary depending on the density of traffic.     

Mechanical properties of concrete containing a high volume of tire-rubber particles

Due to the increasingly serious environmental problems presented by waste tires, the feasibility of using elastic and flexible tire-rubber particles as aggregate in concrete is investigated in this study. Tire-rubber particles composed of tire chips, crumb rubber, and a combination of tire chips and crumb rubber, were used to replace mineral aggregates in concrete. These particles were used to replace 12.5%, 25%, 37.5%, and 50% of the total mineral aggregate's volume in concrete. Cylindrical shape concrete specimens 15 cm in diameter and 30 cm in height were fabricated and cured. The fresh rubberized concrete exhibited lower unit weight and acceptable workability compared to plain concrete. The results of a uniaxial compressive strain control test conducted on hardened concrete specimens indicate large reductions in the strength and tangential modulus of elasticity. A significant decrease in the brittle behavior of concrete with increasing rubber content is also demonstrated using nonlinearity indices. The maximum toughness index, indicating the post failure strength of concrete, occurs in concretes with 25% rubber content. Unlike plain concrete, the failure state in rubberized concrete occurs gently and uniformly, and does not cause any separation in the specimen. Crack width and its propagation velocity in rubberized concrete are lower than those of plain concrete. Ultrasonic analysis reveals large reductions in the ultrasonic modulus and high sound absorption for tire-rubber concrete.     

28-homobrassinolide protects chickpea (Cicer arietinum) from cadmium toxicity by stimulating antioxidants

In the present experiment the seeds of Cicer arietinum (L.) cv. Uday were inoculated with specific Rhizobium grown in sandy loam soil and were allowed to grow for 15 days. At this stage, the seedlings were supplied with 0, 50, 100 or 150 microM of cadmium in the form of cadmium chloride and sprayed with 0.01 microM of 28-homobrassinolide (HBL) at 30-day stage. The data indicated that plant fresh and dry mass, number of nodules, their fresh and dry mass, leghemoglobin content, nitrogen and carbohydrate content in the nodules, leaf chlorophyll content, nitrate reductase and carbonic anhydrase activities decreased proportionately with the increasing concentrations of cadmium but the content of proline and the activities of catalase, peroxidase and superoxide dismutase increased. The ill effect, generated by cadmium, was overcome if the stressed plants were sprayed with HBL.     

Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Occurrence of alternative flame retardants in indoor dust from New Zealand: indoor sources and human exposure assessment

Due to worldwide restrictions on polybrominated diphenyl ethers (PBDEs), the demand for alternative flame retardants (AFRs), such as organophosphate flame retardants (OPFRs), novel brominated FRs (NBFRs) and hexabromocyclododecanes (HBCDs), has recently increased. Little is known about human exposure to NBFRs and OPFRs and that their levels in dust have been scarcely evaluated worldwide. To increase the knowledge regarding these chemicals, we measured concentrations of five major NBFRs, ten OPFRs and three HBCD isomers in indoor dust from New Zealand homes. Dust samples were taken from living room floors (n=34) and from mattresses of the same houses (n=16). Concentrations (ngg(-1)) of NBFRs were: 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) (<2-175), decabromodiphenyl ethane (DBDPE) (<5-1430), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (TBB) (<2-2285) and bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (TBPH) (<2-640). For OPFRs, concentrations (ngg(-1)) ranged between: tri-ethyl-phosphate (TEP) (<10-235), tri-n-butyl-phosphate (TnBP) (<20-7545), tris-(2-chloroethyl)-phosphate (TCEP) (<20-7605), tris-(1-chloro-2-propyl) phosphate (TCPP) (20-7615), tri-(2-butoxyethyl)-phosphate (TBEP) (50-27325), tris-(2,3-dichloropropyl)-phosphate (TDCPP) (20-16560), tri-phenyl-phosphate (TPhP) (20-35190), and tri-cresyl-phosphate (TCP) (<50-3760). HBCD concentrations fell in the range <2-4100ngg(-1). BTBPE, DBDPE, TBPH, TBEP, and TnBP showed significant positive correlation (p<0.05) between their concentrations in mattresses and the corresponding floor dust (n=16). These data were used to derive a range of plausible exposure scenarios. Although the estimated exposure is well below the corresponding reference doses (RfDs), caution is needed given the likely future increase in use of these FRs and the currently unknown contribution to human exposure by other pathways such as inhalation and diet.