On the sensitivity of the value of information to risk aversion in two-action decision problems

This paper discusses the sensitivity of the value of information to the risk aversion in two-action decision problems when the initial wealth is uncertain. We demonstrate that there is no general monotonicity between information value and the Arrow–Pratt risk aversion in this setting. We then show that monotonicity exists in the sense of Rubinstein’s measure of risk aversion when the lottery is independent of the initial wealth. Finally, we show that if the lottery is dependent on the initial wealth, then Ross’s measure of risk aversion is needed to characterize this monotonic relation. Our results explain the shape of the sensitivity analysis curve of the value of information to risk aversion and interpret various measures of risk aversion based on their monotonicity with information value.     

The management of process control deployment using interactions in risks analyses

The purpose of this article is to present the concept of risk typology and its use in the management of process control deployment at a fab-wide level. This research provides a comprehensive method based on Failure Mode Effect and Criticality Analysis to control failures that count throughout an organization.The method employed in this research uses a model of risk analysis and typology to operate a demonstration and to infer management practices.It results from this model: (1) the demonstration of equalities among some typologies and (2) a practical manner to use it to manage the deployment of controls and feedbacks throughout an entire manufacturing system. A four years observation of process control deployment underlines the potential of this method to remove silos-effects among risks analyses.To conclude, the concept of typology can sustain process control management and especially the deployment of controls and feedbacks. An industrial observation evaluates its potential of development.     

Sensitive and selective determination of phenylhydrazine in the presence of hydrazine at a ferrocene-modified carbon nanotube paste electrode

The determination of hydrazine derivatives is of special interest because they are toxic and widely used in industry, agriculture and explosives. Electrochemical analysis has become of growing importance in industrial process control, environmental monitoring, and different applications in medicine and biotechnology. In the present work, we used a carbon paste electrode modified by ferrocene and carbon nanotubes for simultaneous determination of phenylhydrazine and hydrazine. The modified electrode showed an excellent character for electrocatalytic oxidization of phenylhydrazine and hydrazine with a 310 mV separation of both peaks. Differential pulse voltammetric peak currents of phenylhydrazine and hydrazine increased linearly with their concentrations at the range of 0.85–700 and 16–800 μM, and the detection limits (3σ) were determined to be 0.6 and 14 μM, respectively. Here, we show that this electrode could be used as an electrochemical sensor for determination of phenylhydrazine and hydrazine in real samples (water and urine) with advantages such as short time of analysis, lack of pretreatment procedures and more cheaper in comparison with some routine analysis methods such as chromatography or spectroscopy. The modified electrode showed good reproducibility, remarkable long-term stability, and especially good surface renewability by simple mechanical polishing.     

The effect of application time of mobilising agents on growth and phytoextraction of lead by Brassica napus from a calcareous mine soil

Phytoremediation of heavy metal contaminated sites is often limited by the low-bioavailability of the contaminants. Complexing agents can help to improve this technique by enhancing heavy metal solubility. Pot experiments were conducted to determine the best time for the application of ethylene diamine tetraacetic acid (EDTA) and sheep manure extract (SME) for phytoremediation of a contaminated soil by Brassica napus. The plant was grown on a mine calcareous soil treated with increasing concentrations of EDTA or SME 30 and 10?days before sowing (T1 and T2) and 10 and 30?days after sowing (T3 and T4). Soil available Pb and lead concentrations in plant organs of Brassica napus increased with EDTA concentration. The EDTA application before seed germination significantly reduced rapeseed seedling emergence and dry weight. However, the actual amount of phytoextracted Pb by rapeseed did not decrease significantly, due to severe growth depression, at high EDTA concentrations when it had applied at a suitable time (T4). SME application after sowing increased plant dry weight and Pb concentration in the soil solution and enhanced the accumulated metal concentrations in shoots and roots. Comparing the effect of EDTA and SME on Pb phytoextraction, the study showed that SME is not more effective than EDTA. The efficiency of EDTA on Pb phytoextraction by Brassica napus depends on the time of application. The most efficient treatment for Pb phytoextraction by rapeseed was application of 2?g EDTA/kg soil at T4.     

Comparative cancer risk assessment of THMs in drinking water from well water sources and surface water sources

This research evaluates the lifetime cancer risks from trihalomethanes in Tehran's drinking water. The Trihalomethanes were measured in seven different water districts. Sixty-three samples were taken from tap water across the city for 7 months. The samples were analyzed for trihalomethanes using US EPA method 524.2. The average concentration of total trihalomethanes in different districts were between 0.81 and 9.0 μg/L, and the highest concentrations were detected in district 2 at 19.5 μg/L. Total lifetime cancer risks assessment from exposure to trihalomethanes in drinking water (ingestion, inhalation, and skin routes) were performed for people living in different districts in Tehran. The lifetime cancer risk was 7.19 × 10(-5) in district 2 (a more affluent neighborhood) where mostly surface water sources is used to supply drinking water and 9.38 × 10(-6) in district 7 (a less affluent neighborhood) which is mainly supplied with well water sources. Based on the population data, the total expected lifetime cancer cases from exposure to trihalomethanes are 104, 108, 81, 81, 41, 27, and three for districts 1 through 7, respectively. The average lifetime cancer risk was 4.33 × 10(-5) which means a total of 606 lifetime cancer cases for the entire province of Tehran. The highest risk from THMs seems to be from the inhalation route followed by ingestion and dermal contacts.     

Examination of the operator and compensator tank role in urban wastewater treatment using activated sludge method

No doubt, operator is one of the main fundaments in wastewater treatment plants. By identifying the inadequacies, the operator could be considered as an important key in treatment plant. Several methods are used for wastewater treatment that requires spending a lot of cost. However, all investments of treatment facilities are useable when the expected efficiency of the treatment plant was obtained. Using experienced operator, this goal is more easily accessible. In this research, the wastewater of an urban community contaminated with moderated, diluted and highly concentrated pollution has been treated using surface and deep aeration treatment method. Sampling of these pilots was performed during winter 2008 to summer 2009. The results indicate that all analyzed parameters were eliminated using activated sludge and surface aeration methods. However, in activated sludge and deep aeration methods in combination with suitable function of operator, more pollutants could be eliminated. Hence, existence of operator in wastewater treatment plants is the basic principle to achieve considered efficiency. Wastewater treatment system is not intelligent itself and that is the operator who can organize even an inefficient system by its continuous presence. The converse of this fact is also real. Despite the various units and appropriate design of wastewater treatment plant, without an operator, the studied process cannot be expected highly efficient. In places frequently affected by the shock of organic and hydraulic loads, the compensator tank is important to offset the wastewater treatment process. Finally, in regard to microbial parameters, existence of disinfection unit is very useful.     

Effects of noise pollution over the blood serum immunoglobulins and auditory system on the VFM airport workers, Van, Turkey

Noise pollution is a common health problem for developing countries. Especially highways and airports lead to noise pollution in different levels and in many frequencies. In this study, we focused on the effect of noise pollution in airports. This work aimed measurements of noise pollution levels in Van Ferit Melen (VFM) airport and effect of noise pollution over the immunoglobulin A, G, and M changes among VFM airport workers in Turkey. It was seen that apron and terminal workers were exposed to high noise (>80 dB(A)) without any protective precautions. Noise-induced temporary threshold shifts and noise-induced permanent threshold shifts were detected between the apron workers (p?<?0.001) and terminal workers (p?<?0.005). IgA values of apron terminal and control group workers were approximately the same in the morning and increased in a linear manner during the day. This increase was statistically significant (p?<?0.001). IgG and IgM values of apron, terminal, and control group workers were approximately same in the morning. Apron and terminal workers IgG and IgM levels were increased until noon and then decreased until evening as compare to control group, but these changes were not statically significant (p?>?0.05). These findings suggested that the noise pollution in the VFM airport could lead to hearing loss and changes in blood serum immunoglobulin levels of airport workers. Blood serum immunoglobulin changes might be due to vibrational effects of noise pollution. Airport workers should apply protective precautions against effect of noise pollution in the VFM airport.     

The Relationships Between Biomechanical and Postural Stresses,Musculoskeletal Injury Rates,and Perceived Body Discomfort Experienced by Industrial Workers: A Field Study

A combination of archival, subjective, and observational field data collection methods were used to investigate the relationship between biomechanical and postural stresses, and the resulting physical strain experienced by industrial workers of a packaging plant. Assessment of physical strain was based on the number and incidence rate of Occupational Safety and Health Administration (OSHA)-reportable injuries that were recorded over a period of 27 months, and based on the self-reported ratings of perceived body discomfort. Both the biomechanical and postural stresses correlated with the musculoskeletal injury rate. The results illustrate the usefulness of postural and biomechanical analyses for assessing the risk of injury in industry.     

Effect of Nutrient Management Planning on Crop Yield, Nitrate Leaching and Sediment Loading in Thomas Brook Watershed

Government priorities on provincial Nutrient Management Planning (NMP) programs include improving the program effectiveness for environmental quality protection, and promoting more widespread adoption. Understanding the effect of NMP on both crop yield and key water-quality parameters in agricultural watersheds requires a comprehensive evaluation that takes into consideration important NMP attributes and location-specific farming conditions. This study applied the Soil and Water Assessment Tool (SWAT) to investigate the effects of crop and rotation sequence, tillage type, and nutrient N application rate on crop yield and the associated groundwater ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loss. The SWAT model was applied to the Thomas Brook Watershed, located in the most intensively managed agricultural region of Nova Scotia, Canada. Cropping systems evaluated included seven fertilizer application rates and two tillage systems (i.e., conventional tillage and no-till). The analysis reflected cropping systems commonly managed by farmers in the Annapolis Valley region, including grain corn-based and potato-based cropping systems, and a vegetable-horticulture system. ANOVA models were developed and used to assess the effects of crop management choices on crop yield and two water-quality parameters (i.e., ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loading). Results suggest that existing recommended N-fertilizer rate can be reduced by 10–25 %, for grain crop production, to significantly lower ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching (P > 0.05) while optimizing the crop yield. The analysis identified the nutrient N rates in combination with specific crops and rotation systems that can be used to manage ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching while balancing impacts on crop yields within the watershed.     

Petroleum residues in the waters of the Shatt al-Arab River and the northwest region of the Arabian Gulf

During April 1980, water samples were collected from 12 sites in the Shatt al-Arab River and its estuary in the northwest region of the Arabian Gulf. The samples were extracted and the concentration of petroleum hydrocarbons were determined spectrofluorometrically, in order to provide information on the background values of oil generally present in these waters. Total hydrocarbon concentrations of these samples ranged from 2.7 to 86.7 μgL^?1 expressed in terms of Kuwait crude oil equivalents. The highest concentrations were found at sites in the Shatt al-Arab River that are near port areas.