Composition and distribution of surfactants around Lake Chini,Malaysia

This study aims to determine the composition of surfactants in the lake surface microlayer, rainwater, and atmospheric aerosols in the area surrounding Lake Chini, Pahang. Surfactants in the lake surface microlayer were taken from seven different stations around the lake, while samples of rainwater were taken from five different sampling stations. The samples of atmospheric aerosols were collected from the Lake Chini Research Centre which is in close proximity to the lake. The colorimetric analysis method was used to determine the composition and concentration of anionic surfactants as methylene blue active substances (MBAS) and cationic surfactants as disulphine blue active substances (DBAS). The concentration of anionic surfactants, as MBAS, in the surface microlayer ranged between 0.08 to 0.23 μmol L^− 1, while the range of concentration of cationic surfactants as DBAS ranged from 0.09 to 0.11 μmol L^− 1. The concentration of MBAS was higher in rainwater when compared to surfactants in the lake surface microlayer. The high concentration of surfactants in the fine mode of atmospheric aerosols suggests that natural and anthropogenic sources of surfactants contribute to the atmospheric surfactants.     

Land suitability assessment for wind power plant site selection using ANP-DEMATEL in a GIS environment: case study of Ardabil province,Iran

Wind energy is a renewable energy resource that has increased in usage in most countries. Site selection for the establishment of large wind turbines, called wind farms, like any other engineering project, requires basic information and careful planning. This study assessed the possibility of establishing wind farms in Ardabil province in northwestern Iran by using a combination of analytic network process (ANP) and decision making trial and evaluation laboratory (DEMATEL) methods in a geographical information system (GIS) environment. DEMATEL was used to determine the criteria relationships. The weights of the criteria were determined using ANP and the overlaying process was done on GIS. Using 13 information layers in three main criteria including environmental, technical and economical, the land suitability map was produced and reclassified into 5 equally scored divisions from least suitable to most suitable areas. The results showed that about 6.68 % of the area of Ardabil province is most suitable for establishment of wind turbines. Sensitivity analysis shows that significant portions of these most suitable zones coincide with suitable divisions of the input layers. The efficiency and accuracy of the hybrid model (ANP-DEMATEL) was evaluated and the results were compared to the ANP model. The sensitivity analysis, map classification, and factor weights for the two methods showed satisfactory results for the ANP-DEMATEL model in wind power plant site selection.     

Source identification of polycyclic aromatic hydrocarbons (PAHs) in sediment samples from the northern part of the Persian Gulf,Iran

Samples of surface sediments from the Iranian coast of the Persian Gulf were examined to determine the levels and sources of 15 polycyclic aromatic hydrocarbons (PAHs). Samples were collected from 30 sampling sites and analyzed for PAHs by gas chromatography–mass spectrometry (GC-MS). Total concentrations of PAHs ranged from 93 to 4,077 ng g^?1 dry weight. The PAH composition from 30 sampling sites was dominated by four-ring PAH compounds. Molecular indices based on the ratios of PAH concentrations were used to differentiate PAHs from pyrolitic to petrogenic and mixed origins. The results suggested that the main sources of PAHs in sediments from the studied region were mixed pyrolitic and petrogenic. Furthermore, benthic organisms in most of the investigated areas were not at ecotoxicological risk, according to the results from the effects range low (ERL)/effects range median (ERM) techniques suggested by the US Sediment Quality Guidelines (SQGs).     

Analysing land cover changes for understanding of forest dynamics using temporal forest management plans

This study analyses forest dynamics and land use/land cover change over a 43-year period using spatial-stand-type maps of temporal forest management plans of Karaisal? Forest Enterprise in the Eastern Mediterranean Region of Turkey. Stand parameters (tree species, crown closures and developmental stages) of the dynamics and changes caused by natural or artificial intervention were introduced and mapped in a Geographic Information System (GIS) and subjected to fragmentation analysis using FRAGSTATS. The Karaisal? Forest Enterprise was first planned in 1969 and then the study area was planned under the Mediterranean Forest Use project in 1991 and five-term forest management plans were made. In this study, we analysed only four periods (excluding 1982 revision plans): 1969, 1991, 2002 and 2012. Between 1969 and 2012, overall changes included a net increase of 3,026 ha in forested areas. Cumulative forest improvement accounted for 2.12 % and the annual rate of total forest improvement averaged 0.08 %. In addition, productive forest areas increased from 36,174 to 70,205 ha between 1969 and 2012. This translates into an average annual productive forest improvement rate of 1.54 %. At the same time, fully covered forest areas with crown closure of “3” (>70 %) increased about 21,321 ha, and young forest areas in developmental stage of “a” (diameter at breast height (dbh)?<?8 cm) increased from 716 to 13,305 ha over the 43-year study period. Overall changes show that productive and fully covered forest areas have increased egregiously with a focus on regenerated and young developmental stages. A spatial analysis of metrics over the 43-year study period indicated a more fragmented landscape resulting in a susceptible forest to harsh disturbances.     

Heavy metals in brick kiln located area using atomic absorption spectrophotometer: a case study from the city of Peshawar, Pakistan

Environmental pollution is one of the burning issues of the world. In developed countries, there are lot of awareness about the environment and the impact of various industries on their life and surroundings. A little has been done in this direction in developing countries. In Pakistan, a big problem is the rapid conglomeration of the brick kilns in the outskirts of nearly all the urban centers to cope with the rapid construction work in big cities. A huge amount of low-grade coal or rubber tires is used as fuel in a very non-scientific manner. The purpose of the present study was to look into the impact of the brick kilns on the different aspects of environmental pollution caused by these kilns. Concentration of metals Cu, Co, Zn, Pb, Cr, Ni, Cd, and Mn were measured on 36 soil samples collected from the area and the same number of plant samples in order to establish the distribution of heavy metals in the area and to determine the effect of this distribution on the surrounding atmosphere and the possible effects on human life.     

Assessment of surface water quality of the Ceyhan River basin, Turkey

In this study, surface water quality of the Ceyhan River basin were assessed and examined with 13 physico-chemical parameters in 31 stations in 3 months during the period of 2005. Multivariate statistical techniques were applied to identify characteristics of the water quality in the studied stations. Nutrients, Cl^??? and Na^?+? affected mostly to the stations of Erkenez 2, S?r 2, and S?r 3 in the ordination diagram of correspondence analysis. Three factors were extracted by principal component analysis, which explains 79.14% of the total variation. The first factor (PC1) captures variables of EC, DO, NO $_{2}^{\; -}$ , PO $_{4}^{\; \equiv }$ , Cl^???, SO $_{4}^{\; =}$ , Na^?+?, and Ca^?+?+?. The second factor (PC2) is significantly related to pH, NH $_{3}^{\; -}$ , and Mg^?+?+?, while water temperature (T) and NO $_{3}^{\; -}$ accounted for the greatest loading for factor 3 (PC3). The stations were divided into three groups for PC1, two groups for PC2, and three groups for PC3 by hierarchical cluster analysis. The stations in the vicinity of cities presented low dissolved oxygen and high concentration of physico-chemical parameter levels. The stations of Erkenez 2, S?r 2, S?r 3, and Aksu 4 located near the city of Kahramanmara? were characterized by an extremely high pollution due to discharge of wastewater from industry and domestic. P?narba?? and Elbistan stations were also influenced by household wastewater of the city of Elbistan. According to criteria of Turkish Water Pollution Control Regulation, Erkenez 2, S?r 2, and S?r 3 stations have high polluted water. This study suggests that it is urgent to control point pollutions, and all wastewater should be purified before discharge to the Ceyhan River basin.     

Impact of transport and industrial emissions on the ambient air quality of Lahore City, Pakistan

This study was monitored to determine the changes in the micromineral and macromineral composition of common sole (Solea solea), striped red mullet (Mullus surmuletus), and whiting (Merlangius merlangus) throughout the year. Macromineral concentrations in edible parts of fish species were 444–1,559 mg/kg for Na, 1,975–5,130 mg/kg for K, 228–658 mg/kg for Mg, 187–1,105 mg/kg for Ca, and 2,341–7,341 for P, respectively. The highest mercury contents were found in the autumn months. While the highest protein and lowest fat values were found in the summer, the highest ash contents were found in the spring. Mercury content was found to be over the legislative limits in autumn samples for common sole and in summer for striped red mullet. Lead and cadmium contents of striped red mullet were found to be over the legislative limits throughout year.     

Monitoring forest structure at landscape level: a case study of Scots pine forest in NE Turkey

This study aims to investigate the change in spatial-temporal configuration of secondary forest succession and generate measurements for monitoring the changes in structural plant diversity in Yaln?zçam Scots pine forest in NE Turkey from 1972 to 2005. The successional stages were mapped using the combination of Geographic Information System (GIS), Global Positioning System (GPS), aerial photos and high resolution satellite images (IKONOS). Forest structure and its relationship with structural plant diversity along with its changes over time were characterized using FRAGSTATS. In terms of spatial configuration of seral stages, the total number of fragments increased from 572 to 735, and mean size of patch (MPS) decreased from 154.97 ha to 120.60 ha over 33 years. The situation resulted in forestation serving appropriate conditions for plant diversity in the area. As an overall change in study area, there was a net increase of 1823.3 ha forest during the period with an average annual forestation rate of 55.25 ha year^?1(0.4% per year). In conclusion, the study revealed that stand type maps of forest management plans in Turkey provide a great chance to monitor the changes in structural plant diversity over time. The study further contributes to the development of a framework for effective integration of biodiversity conservation into Multiple Use Forest Management (MUFM) plans using the successional stages as a critical mechanism.     

Impact of storm water on groundwater quality below retention/detention basins

Groundwater from 33 monitoring of peripheral wells of Karachi, Pakistan were evaluated in terms of pre- and post-monsoon seasons to find out the impact of storm water infiltration, as storm water infiltration by retention basin receives urban runoff water from the nearby areas. This may increase the risk of groundwater contamination for heavy metals, where the soil is sandy and water table is shallow. Concentration of dissolved oxygen is significantly low in groundwater beneath detention basin during pre-monsoon season, which effected the concentration of zinc and iron. The models of trace metals shown in basin groundwater reflect the land use served by the basins, while it differed from background concentration as storm water releases high concentration of certain trace metals such as copper and cadmium. Recharge by storm water infiltration decreases the concentration and detection frequency of iron, lead, and zinc in background groundwater; however, the study does not point a considerable risk for groundwater contamination due to storm water infiltration.     

Application of multivariate statistical approach to identify heavy metal sources in bottom soil of the Seyhan River (Adana), Turkey

In this study, freshly deposited soils were sampled from the Seyhan River (Turkey) from the exit of the Seyhan Dam to the Adana exit. Heavy metal contents were measured with X-ray fluorescence spectrometer. Multivariate statistical approach is used to identify the sources of heavy metals and other elements in soil samples. Considering the size of anomalies, metals are ranked as Co>Pb>Cr>Zn>Al. Based on the hierarchical cluster analysis results, three clusters were observed. P, Mg, Ti, Fe, Ca, Na, K, Al, Si, and Nb form the first cluster, Zn, Sr, Pb, and Cr associated as the second cluster, and Ba and Co form the third cluster. Three factors computed from principal component analysis are explained with a cumulative variance of 95%. The first factor is defined with “high background lithogenic factor” Co, the second factor with “local industrial factor” Pb, Cr, Ba, and Mg, and the third factor with “natural factor” Cr and Pb.