Effect of fishing vessels on trace metal contamination in sediments of three harbors along Iranian Oman Sea coast

In this study, the levels of natural and anthropogenic metal contamination (aluminum (Al), iron (Fe), manganese (Mn), arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn)) in surface sediments of three harbors along the Iranian coast of Gulf of Oman were examined and reported for the first time. Effect of grain size, mineralogy, normalization technique using Fe concentrations, and different sediment quality guidelines were discussed. Data from the harbors were compared with other harbors worldwide. Sediments inside the harbors are characterized by moderate and high levels of pollution by trace metals Cu (12–287 μg/g), Pb (11–1,780 μg/g), Zn (38–547 μg/g), Cr (70–2,370 μg/g), and Ni (31–116 μg/g). However, As and Cd did not show considerable pollution inside and outside the harbors. Considering that there is no industrial activity around the study harbors, the major sources of contamination in the harbors are repairing, fueling, greasing, and painting of fishing ships and boats. Mineralogy of sediments in the study area as well as trace metal concentration in reference samples taken from onshore geological units confirmed that natural inputs of Cd, Cu, Pb, and Zn in the harbors are very low while most of Ni and Cr contamination in the study area comes from erosion of ophiolitic mélange units at the North of Makran mountains.     

Analysis of elemental concentration using ICP-AES and pathogen indicator in drinking water of Qasim Abad, District Rawalpindi, Pakistan

The present study was conducted to investigate drinking water quality (groundwater) from water samples taken from Qasim Abad, a locality of approximately 5,000 population, situated between twin cities Rawalpindi and Islamabad in Pakistan. The main sources of drinking water in this area are water bores which are dug upto the depth of 250–280 ft in almost every house. The study consists of the determination of physico-chemical properties, trace metals, heavy metals, rare earth elements and microbiological quality of drinking water. The data showed the variation of the investigated parameters in samples as follows: pH 6.75 to 8.70, electrical conductivity 540 to 855 μS/cm, total dissolved solids 325.46 to 515.23 ppm and dissolved oxygen 1.50 to 5.64 mg/L which are within the WHO guidelines for drinking water quality. The water samples were analysed for 30 elements (aluminium, iron, magnesium, manganese, silicon, zinc, molybdenum, titanium, chromium, nickel, tungsten, silver, arsenic, boron, barium, beryllium, cadmium, cobalt, copper, gallium, mercury, lanthanum, niobium, neodymium, lead, selenium, samarium, tin, vanadium and zirconium) by using inductively coupled plasma atomic emission spectroscopy. The organic contamination was detected in terms of most probable number (MPN) of faecal coliforms. Overall, elemental levels were lower than the recommended values but three water bores (B-1, B-6, B-7) had higher values of iron (1.6, 2.206, 0.65 ppm), two water bores (B-1, B-6) had higher values of aluminium (0.95, 1.92 ppm), respectively, and molybdenum was higher by 0.01 ppm only in one water bore (B-11). The total number of coliforms present in water samples was found to be within the prescribed limit of the WHO except for 5 out of 11 bore water samples (B-2, B-3, B-4, B-8, B-11), which were found in the range 5–35 MPN/100 mL, a consequence of infiltration of contaminated water (sewage) through cross connection, leakage points and back siphoning.     

Microelectrophoretic study of environmentally induced DNA damage in fish and its use for early toxicity screening of freshwater bodies

This study investigates the potential of the comet and micronucleus assays of fish DNA as a means of screening the toxicity of aquatic environments. Catla catla and Cirrhinus mrigala collected from the River Chenab in Pakistan were used as a case study for the application of comet and micronucleus techniques. Comet and micronucleus assays were used to compare DNA damage in C. catla and C. mrigala collected from polluted areas of the River Chenab and farmed fish. Atomic absorption spectrophotometry showed an acute level of toxicity from Cd, Cu, Mn, Zn, Pb, Cr, Sn, and Hg in river water. Comet assay showed significant (p < 0.05) DNA damage in C. catla representing 17.33 ± 2.42, 11.53 ± 2.14, and 14.17% DNA in the comet tail, averaged from three sites of the polluted area of the river. Tail moment was observed as 10.06 ± 2.71, 3.11 ± 0.74, and 14.70 ± 1.89, while olive moment was 8.85 ± 1.84, 3.83 ± 0.76, and 7.11 ± 0.73, respectively. Highly significant (p < 0.01) damage was reported in C. mrigala as 37.29 ± 2.51, 34.96 ± 2.53, and 38.80 ± 2.42% DNA in comet tail, tail moment was 23.48 ± 3.90, 19.78 ± 4.26, and 14.30 ± 1.82, and olive moment was 16.22 ± 2.04, 13.83 ± 1.96, and10.99 ± 0.90. Significant (p < 0.05) differences were observed in genotoxicity between farmed and polluted area fish. Micronucleus assay showed a similar picture of significant difference in respect to single and double micronucleus induction: i.e., 23.20 ± 4.19 and 2.80 ± 1.07‰ in C. catla and 44.80 ± 3.73 and 06.20 ± 0.97‰, respectively, in C. mrigala. Nuclear abnormalities were found as 6.00 ± 0.84 and 09.60 ± 1.72/thousand cells, respectively, in both species. The results of this study suggest that these novel fish DNA damage assays can be used as an expedient toxicity screening for aquatic environments.     

Biogas production from olive pomace

Biogas production from a slurry obtained by mixing finely ground olive pomace in water was investigated using anaerobic digesters of 1-l working volume at 37°C. A start-up culture was obtained from a local landfill area and was adopted to the slurry within 10 days at this temperature. The biogas generation rates were determined by varying the total solids (TS) concentration in the slurry and the hydraulic retention time (HRT) during semi-continuous digestion. The maximum rate was found to be 0.70 l of biogas per l of digester volume per day, corresponding to a HRT of 20 days and 10% TS with a yield of 0.08 l biogas per g chemical oxygen demand (COD) added to the digester. The methane content of the biogas was in the range of 75–80% for both batch and semi-continuous runs, the remainder being principally carbon dioxide.     

Heterotrophic Biological Denitrification Using Microbial Cellulose as Carbon Source

The objective of this study was to investigate the feasibility of using a microbial biopolymer produced by Acetobacter xylinum as a carbon source for heterotrophic biological denitrification. The denitrification rate, COD availability and nitrite concentration were response parameters. Under the experimental conditions, a denitrification rate of about 0.74 kg NO₃ ⁻N/m³d at 6 h retention time was achieved with microbial cellulose (MC). The reactor effluent contained significantly COD concentrations (20–86 mg/L) so it was not carbon limited, and was receiving enough carbon to facilitate the denitrification process. The maximum nitrite concentration in the effluent was found to be 0.4 mg/L. However, decreasing the retention time to 3 h significantly reduced the efficiency. It can be concluded that the MC is a suitable carbon source for nitrate removal in a heterotrophic biological denitrification process.     

Date palm (Phoenix dactylifera L.) leaves as biomonitors of atmospheric metal pollution in arid and semi-arid environments

The leaves of date palms were evaluated as a possible biomonitor of heavy metal contamination in Ma’an city, Jordan. Concentrations of (Fe), (Pb), (Zn), (Cu), (Ni), and (Cr) were determined in washed and unwashed leaves and soil samples collected from different sites with different degrees of metal contamination (urban, suburban, industrial, highway and rural sites); separate leaves were taken from outside the city to be used as a control sample. Samples collected from industrial sites were found to have high concentrations of all metals except those of Cu, Ni and Pb, which were found at high levels in the highway site samples which is associated with the road traffic. The difference between unwashed and washed samples showed that metal pollutants exist as contaminants, particularly Pb, Zn and Ni, which varied in concentration, depending on the source of the metal.