The Sensitivity of PM25 Source-Receptor Relationships to Atmospheric Chemistry and Transport in a Three-Dimensional Air Quality Model

ABSTRACT

Air quality model simulations constitute an effective approach to developing source-receptor relationships (so-called transfer coefficients in the risk analysis framework) because a significant fraction of particulate matter (particularly PM_2.5) is secondary (i.e., formed in the atmosphere) and, therefore, depends on the atmospheric chemistry of the airshed. In this study, we have used a comprehensive three-dimensional air quality model for PM_{2 5} (SAQM-AERO) to compare three approaches to generating episodic transfer coefficients for several source regions in the Los Angeles Basin. First, transfer coefficients were developed by conducting PM_2.5 SAQM-AERO simulations with reduced emissions of one of four precursors (i.e., primary PM, sulfur dioxide (SO₂), oxides of nitrogen (NO_x), and volatile organic compounds) from each source region. Next, we calculated transfer coefficients using two other methods: (1) a simplified chemistry for PM_2.5 formation, and (2) simplifying assumptions on transport using information limited to basin-wide emission reductions. Transfer coefficients obtained with the simplified chemistry were similar to those obtained with the comprehensive model for VOC emission changes but differed for NO and SO emission changes. The differences were due to the parameterization of the rates of secondary PM formation in the simplified chemistry. In 90% of the cases, transfer coefficients estimated using only basin-wide information were within a factor of two of those obtained with the explicit source-receptor simulations conducted with the comprehensive model. The best agreement was obtained for VOC emission changes; poor agreement was obtained for primary PM_2.5.     

A review of the PGM industry,deposit models and exploration practices: Implications for Australia's PGM potential

Australia is prospective for platinum group metal (PGM) mineralisation (in particular primary magmatic reef, primary magmatic by-product, late magmatic and hydrothermal, and alluvial placer type) but its known PGM endowment is negligible compared to that of South Africa, Russia, the USA and Canada. Most Australian PGM projects are operated by mid-cap or junior companies and form part of larger, more diverse project portfolios held by these explorers. Most projects were ‘hot’ while market conditions were favourable. However, as other metals became ‘fashionable’ and market conditions for PGM changed, so did the focus of these companies. Pure PGM companies are rare in Australia. The search for and development of PGM-only deposits in Australia are high risk business activities. No new primary PGM deposits have been discovered since the mid to late 1980s and none of the significant deposits that were discovered or evaluated in the 1980s have been mined. This review suggests that at least several A$10 million but more likely several A$100 million were sunk into PGM exploration and development projects but none advanced to the mining stage. The viability of Australian PGM projects is very sensitive to (1) metal prices, (2) the US$/A$ exchange rate, and (3) large capital expenditure requirements relative to the small size of Australian PGM-only deposits. Most PGM-only projects were initiated at times of high PGM prices. However, advanced exploration, feasibility studies and project development always lagged behind the price booms. South Africa, Russia and Canada contain approximately 98% of the known global PGM reserves. This situation has a very negative effect on the Australian PGM industry as the well-endowed nations continue to receive the lion's share of exploration spend and new projects.     

Biophysical and anthropogenic controls of forest fires in the Deccan Plateau, India

Forest fires constitute one of the most serious environmental problems in several forested regions of India. In the Indian sub-continent, relatively few studies have focused on the assessment of biophysical and anthropogenic controls of forest fires at a landscape scale and the spatial aspects of these relationships. In this study, we used fire count data sets from satellite remote sensing data covering 78 districts over four different states of the Deccan Plateau, India, for assessing the underlying causes of fires. Spatial data for explanatory variables of fires pertaining to topography, vegetation, climate, anthropogenic and accessibility factors have been gathered corresponding with fire presence/absence. A logistic regression model was used to estimate the probability of the presence of fires as a function of the explanatory variables. Results for fire area estimates suggested that, of the total fires covering 47,043km(2) that occurred during the year 2000 for the entire Indian region, 29.0% occurred in the Deccan Plateau, with Andhra Pradesh having 13.5%, Karnataka 14.7%, Kerala 0.1%, and Tamilnadu 1.15%. Results from the logistic regression suggest that the strongest influences on the fire occurrences were the amount of forest area, biomass densities, rural population density (PD), average precipitation of the warmest quarter, elevation (ELE) and mean annual temperature (MAT). Among these variables, biomass density (BD) and average precipitation of the warmest quarter had the highest significance, followed by others. These results on the best predictors of forest fires can be used both as a strategic planning tool to address broad scale fire risk concerns, and also as a tactical guide to help forest managers to design fire mitigation measures at the district level.     

Study on the biodegradability improvement of 2,4 dinitrophenol in wastewater using advanced oxidation/reduction process with UV/SO3/ZnO

Environmental Science and Pollution Research - 2,4-Dinitrophenol (2,4-DNP) is a toxic compound that is widely used in many industrial and agricultural processes. This compound has low...     

Dairy wastewater treatment using water treatment sludge as coagulant: a novel treatment approach

The dairy industry is among the most polluting industries as it produces large volume of wastewater that may adversely affect the environment if discharged untreated. Dairy wastewater is characterized by high COD, BOD and nutrient levels. In this study, water treatment sludge was used as a coagulant for the treatment of synthetic dairy wastewater in the pH range of 4–10. Turbidity, COD, BOD, TSS and TDS removals from the synthetic dairy wastewater were found to be around 93, 65, 67, 84 and 85%, respectively, at the optimum conditions. Water treatment sludge was found to perform even better than other conventional coagulants used for the same. Results showed that it has the potential to substitute the conventional coagulants partially or fully in the primary treatment of dairy wastewater. The utilization of water treatment sludge at dairy wastewater treatment plants would provide sustainable sludge management and cost-effective dairy wastewater treatment.     

Rapid immobilization of viable Bacillus pseudomycoides in polyvinyl alcohol/glutaraldehyde hydrogel for biological treatment of municipal wastewater

A new approach for easy synthesis of Bacillus pseudomycoides immobilized polyvinyl alcohol (PVA)/glutaraldehyde (GA) hydrogel for application in a wastewater treatment system is reported. Optimization studies revealed that GA/PVA mass ratio of 0.03 and acidic pH of 2 were required for hydrogel synthesis and eventually for bacterial cell immobilization. The synthesized crosslinked matrix possessed a pore size suitable for microbial cell entrapment while maintaining cell accessibility to external environment for bioremediation. Possible crosslinking and bacterial cell immobilization in the hydrogel were evidenced by FTIR, XRD, and SEM studies, respectively. Further, the extent of crosslinking of GA with PVA was investigated and confirmed by transmittance and permeability experiments. The viability and proliferation of hydrogel embedded cells (after 25 days) was confirmed by confocal fluorescence microscopy which also indicated that acidic pH of polymer solution did not affect the immobilized live cells. B. pseudomycoides immobilized hydrogel were demonstrated to be effective for treatment of municipal wastewater and reduced biochemical oxygen demand (BOD), chemical oxygen demand (COD), and protein content below the recommended levels. Overall, the results from this bench-scale work show that employing bacteria-embedded PVA/GA hydrogel for the treatment of municipal wastewater yield promising results which should be further explored in pilot/field-scale studies.

     

3D MRI measurements of the effects of wind direction on flow characteristics and contaminant dispersion in a model urban canopy

Environmental Fluid Mechanics - Three dimensional velocity fields and contaminant dispersion within an evenly spaced orthogonal array of cubic buildings (height = H) with a central tall...     

Removal of the hazardous dye rhodamine B through photocatalytic and adsorption treatments

This paper reports on photocatalytic and adsorptive treatment of a hazardous xanthene dye, Rohdamine B, in wastewater. The photocatalytic degradation was carried out in the presence of the catalyst TiO(2) and the effects of pH, concentration of the dye, amount of TiO(2), temperature and electron acceptor H(2)O(2) on the degradation process were observed. It was found that photocatalytic degradation by TiO(2) is an effective, economical and faster mode of removing Rohdamine B from aqueous solutions. Attempts were also made to utilize activated carbon and rice husk as potential adsorbents to remove Rhodamine B from wastewater. The adsorption studies were carried out at 40, 50 and 60 degrees C, and the effects of pH, temperature, amount of adsorbents, concentration of adsorbate, etc., on the adsorption were measured. On the basis of adsorption data the Langmuir and Freundlich adsorption isotherm models were also confirmed. The adsorption isotherm constants thus obtained were employed to calculate thermodynamic parameters like Gibb's free energy, change in enthalpy and entropy. In order to observe the quality of wastewater COD measurements were also carried out before and after the treatments. A significant decrease in the COD values was observed, which clearly indicates that both photocatalytic and adsorption methods offer good potential to remove Rhodamine B from industrial effluents.     

Photosynthesis mediated decrease in cadmium translocation protect shoot growth of Oryza sativa seedlings up on ammonium phosphate – sulfur fertilization

Cadmium (Cd) stress responses in seedlings of two Indian rice cultivars, MTU 7029 and MO 16 were investigated under ammonium-based fertilizer amendment. Cd translocation was reduced by fertilizer treatment. An increase in the production of organic acids as well as nitrogenous compounds and maintenance of nutrient status were implicated for decrease in Cd translocation which in turn promoted shoot growth. Fertilizer treatment increased photosynthetic pigments and activity of antioxidant enzymes that ensured steady photosynthetic rate during Cd stress. MO 16 showed Cd exclusion characteristics when compared with MTU 7029. Photosynthesis performance of MO 16 was not affected by Cd treatments. These findings suggest that photosynthesis influenced decrease in Cd translocation enhanced shoot growth of seedlings during ammonium phosphate–sulfur fertilizer supplementation.