A review of the PGM industry,deposit models and exploration practices: Implications for Australia's PGM potential

Australia is prospective for platinum group metal (PGM) mineralisation (in particular primary magmatic reef, primary magmatic by-product, late magmatic and hydrothermal, and alluvial placer type) but its known PGM endowment is negligible compared to that of South Africa, Russia, the USA and Canada. Most Australian PGM projects are operated by mid-cap or junior companies and form part of larger, more diverse project portfolios held by these explorers. Most projects were ‘hot’ while market conditions were favourable. However, as other metals became ‘fashionable’ and market conditions for PGM changed, so did the focus of these companies. Pure PGM companies are rare in Australia. The search for and development of PGM-only deposits in Australia are high risk business activities. No new primary PGM deposits have been discovered since the mid to late 1980s and none of the significant deposits that were discovered or evaluated in the 1980s have been mined. This review suggests that at least several A$10 million but more likely several A$100 million were sunk into PGM exploration and development projects but none advanced to the mining stage. The viability of Australian PGM projects is very sensitive to (1) metal prices, (2) the US$/A$ exchange rate, and (3) large capital expenditure requirements relative to the small size of Australian PGM-only deposits. Most PGM-only projects were initiated at times of high PGM prices. However, advanced exploration, feasibility studies and project development always lagged behind the price booms. South Africa, Russia and Canada contain approximately 98% of the known global PGM reserves. This situation has a very negative effect on the Australian PGM industry as the well-endowed nations continue to receive the lion's share of exploration spend and new projects.     

The mountain-lowland debate: deforestation and sediment transport in the upper Ganga catchment

The Himalaya-Gangetic Plain region is the iconic example of the debate about the impact on lowlands of upland land-use change. Some of the scientific aspects of this debate are revisited by using new techniques to examine the role of deforestation in erosion and river sediment transport. The approach is whole-of-catchment, combining a history of deforestation with a history of sediment sources from well before deforestation. It is shown that deforestation had some effect on one very large erosional event in 1970, in the Alaknanda subcatchment of the Upper Ganga catchment, but that both deforestation and its effects on erosion and sediment transport are far from uniform in the Himalaya. Large magnitude erosional events occur for purely natural reasons. The impact on the Gangetic Plain of erosion caused by natural events and land cover change remains uncertain.     

Assessment of Economic and Water Quality Impacts of Land Use Change Using a Simple Bioeconomic Model

The objective of this study is to assess the economic and water quality impact of land use change in a small watershed in the Wiregrass region of Alabama. The study compares changes in water quality and revenue from agricultural and timber production due to changes in land use between years 1992 and 2001. The study was completed in two stages. In the first stage, a biophysical model was used to estimate the effect of land use change on nitrogen and phosphorus runoff and sediment deposition in the main channel; in the second stage, farm enterprise budgeting tools were used to estimate the economic returns for the changes in land use condition. Both biophysical and economic results are discussed, and a case for complex optimization to develop a decision support system is presented.     

Removal of substituted phenols onto iron‐treated Nostoc sp. biomass

This study explored the possibility of removing 4‐nitrophenol (4‐NP) and 2,4‐dichlorophenol (2,4‐DCP) from water by using a dead blue‐green algae, Nostoc sp., dried and untreated and dried and treated with iron (Fe‐treated with 0.1 M ferric chloride solution for 1 day). The Nostoc sp. untreated and Fe‐treated biomass were used to study the sorption and desorption of 4‐NP and 2,4‐DCP. The effects of solute concentration, ionic strength, and temperature on sorption and desorption in the presence of untreated and treated Nostoc sp. biomass were investigated. The Fe‐treated Nostoc sp. biomass sorbed higher amounts of both 4‐NP and 2,4‐DCP than the untreated biomass. The percent cumulative desorption decreased from 6.41% to 0.28% and 1.84% to 0.19%, respectively, for 4‐NP and 2,4‐DCP for the Fe‐treated biomass. Biosorption of 4‐NP and 2,4‐DCP onto untreated and Fe‐treated Nostoc sp. biomass conformed to Freundlich isotherms. Iron treatment of Nostoc sp. biomass increased the value of ln K from 8.07 to 8.59 for 4‐NP and from 8.04 to 8.51 for 2,4‐DCP but decreased their desorption. An increase in ionic strength (0.003–0.03) increased the biosorption of both substituted phenols and decreased their percent desorption. An increase in temperature in the range of 15–35°C decreased the sorption of 4‐NP and 2,4‐DCP onto both untreated and Fe‐treated Nostoc sp. biomass and increased their desorption, indicating that the biosorption of both substituted phenols onto untreated and Fe‐treated Nostoc sp. biomass was principally a physical process. The results of this study suggest that Fe‐treated dried Nostoc sp. biomass could be explored as an inexpensive and eco‐friendly material for the effective removal of these phenols and, potentially, other chemicals from industrial wastewater and contaminated groundwater.     

Study on the biodegradability improvement of 2,4 dinitrophenol in wastewater using advanced oxidation/reduction process with UV/SO3/ZnO

Environmental Science and Pollution Research - 2,4-Dinitrophenol (2,4-DNP) is a toxic compound that is widely used in many industrial and agricultural processes. This compound has low...     

Dairy wastewater treatment using water treatment sludge as coagulant: a novel treatment approach

The dairy industry is among the most polluting industries as it produces large volume of wastewater that may adversely affect the environment if discharged untreated. Dairy wastewater is characterized by high COD, BOD and nutrient levels. In this study, water treatment sludge was used as a coagulant for the treatment of synthetic dairy wastewater in the pH range of 4–10. Turbidity, COD, BOD, TSS and TDS removals from the synthetic dairy wastewater were found to be around 93, 65, 67, 84 and 85%, respectively, at the optimum conditions. Water treatment sludge was found to perform even better than other conventional coagulants used for the same. Results showed that it has the potential to substitute the conventional coagulants partially or fully in the primary treatment of dairy wastewater. The utilization of water treatment sludge at dairy wastewater treatment plants would provide sustainable sludge management and cost-effective dairy wastewater treatment.     

Removal of the hazardous dye rhodamine B through photocatalytic and adsorption treatments

This paper reports on photocatalytic and adsorptive treatment of a hazardous xanthene dye, Rohdamine B, in wastewater. The photocatalytic degradation was carried out in the presence of the catalyst TiO(2) and the effects of pH, concentration of the dye, amount of TiO(2), temperature and electron acceptor H(2)O(2) on the degradation process were observed. It was found that photocatalytic degradation by TiO(2) is an effective, economical and faster mode of removing Rohdamine B from aqueous solutions. Attempts were also made to utilize activated carbon and rice husk as potential adsorbents to remove Rhodamine B from wastewater. The adsorption studies were carried out at 40, 50 and 60 degrees C, and the effects of pH, temperature, amount of adsorbents, concentration of adsorbate, etc., on the adsorption were measured. On the basis of adsorption data the Langmuir and Freundlich adsorption isotherm models were also confirmed. The adsorption isotherm constants thus obtained were employed to calculate thermodynamic parameters like Gibb's free energy, change in enthalpy and entropy. In order to observe the quality of wastewater COD measurements were also carried out before and after the treatments. A significant decrease in the COD values was observed, which clearly indicates that both photocatalytic and adsorption methods offer good potential to remove Rhodamine B from industrial effluents.     

Effective method for extraction of larvicidal component from leaves of Azadirachta indica and Artemisia annua Linn

Leaves of Artemisia annua linn. and Azadirachta indica were extracted in petroleum ether and hexane respectively by different methods of extraction i.e. cold extraction, reflux extraction and soxhlet extraction. The crude extract obtained was tested against third instar larvae of Anopheles stephensi. On comparison of larval mortality of crude extract obtained by these three methods, both soxhlet and reflux extraction method showed 100% mortality at 200 ppm after 48 hr in case of A. annua. However LC50 (20 ppm) value of crude extract obtained by soxhlet extraction showed better results than reflux extraction (35 ppm) method after 72 hr. In case of A. indica, crude obtained by soxhlet showed 100% mortality (after 48 hr) at 250 ppm and LC50 of 69 ppm at 72 hr. Reflux extraction does not show any appreciable mortality even at 250 ppm concentration.     

Physicochemical and thermal characterization of nonedible oilseed residual waste as sustainable solid biofuel

The present study aims to investigate the potential of nonedible oilseed Jatropha (Jatropha curcas) and Karanja (Pongamia pinnata) defatted residual biomasses (whole seed, kernel, and hull), as solid biofuel. These biomasses showed good carbon contents (39.8–44.5%), whereas, fewer amounts were observed for sulfur (0.15–0.90%), chlorine (0.64–1.76%), nitrogen (0.9–7.2%) and ash contents (4.0–8.7%). Their volatile matter (60.23–81.6%) and calorific values (17.68–19.98 MJ/kg) were found to be comparable to coal. FT-IR and chemical analyses supported the presence of good amount of cellulose, hemicellulose and lower lignin. The pellets prepared without any additional binder, showed better compaction ratio, bulk density and compressive strength. XRF analysis carried out for determination of slagging–fouling indices, suggested their ash deposition tendencies in boilers, which can be overcome significantly with the optimization of the blower operations and control of ash depositions. Thus, overall various chemical, physical properties, thermal decomposition, surface morphological studies and their high biofuel reactivity indicated that residual biomasses of Jatropha and Karanja seeds have high potential to be utilized as a solid biofuel.