Emissions from the combustion of eucalypt and pine chips in a fluidized bed reactor

Interest in renewable energy sources has increased in recent years due to environmental concerns about global warming and air pollution,reduced costs and improved efficiency of technologies.Under the European Union(EU)energy directive,biomass is a suitable renewable source.The aim of this study was to experimentally quantify and characterize the emission of particulate matter(PM_(2.5))resulting from the combustion of two biomass fuels(chipped residual biomass from pine and eucalypt),in a pilot-scale bubbling fluidized bed(BFB)combustor under distinct operating conditions.The variables evaluated were the stoichiometry and,in the case of eucalypt,the leaching of the fuel.The CO and PM_(2.5)emission factors were lower when the stoichiometry used in the experiments was higher(0.33±0.1 g CO/kg and 16.8±1.0 mg PM_(2.5)/kg,dry gases).The treatment of the fuel by leaching before its combustion has shown to promote higher PM_(2.5)emissions(55.2±2.5 mg/kg,as burned).Organic and elemental carbon represented 3.1 to 30 wt.% of the particle mass,while carbonate(CO_3~(2-))accounted for between 2.3 and 8.5 wt.%.The particulate mass was mainly composed of inorganic matter(71% to 86% of the PM_(2.5)mass).Compared to residential stoves,BFB combustion generated very high mass fractions of inorganic elements.Chloride was the water soluble ion in higher concentration in the PM_(2.5)emitted by the combustion of eucalypt,while calcium was the dominant water soluble ion in the case of pine.     

Anaerobic co-digestion of coffee waste and sewage sludge

The feasibility of the anaerobic co-digestion of coffee solid waste and sewage sludge was assessed. Five different solid wastes with different chemical properties were studied in mesophilic batch assays, providing basic data on the methane production, reduction of total and volatile solids and hydrolysis rate constant. Most of the wastes had a methane yield of 0.24-0.28 m3 CH4(STP)/kg VS(initial) and 76-89% of the theoretical methane yield was achieved. Reduction of 50-73% in total solids and 75-80% in volatile solids were obtained and the hydrolysis rate constants were in the range of 0.035-0.063 d(-1). One of the solid wastes, composed of 100% barley, achieved a methane yield of 0.02 m3 CH4(STP)/kg VS(initial), reductions of 31% in total solids, 40% in volatile solids and achieved only 11% of the theoretical methane yield. However, this waste presented the highest hydrolysis rate constant. Considering all the wastes, an inverse linear correlation was obtained between methane yield and the hydrolysis rate constant, suggesting that hydrolysis was not the limiting factor in the anaerobic biodegradability of this type of waste.     

Thermoplasticization of High Amylose Starch by Chemical Modification Using Reactive Extrusion

Modified thermoplastic high amylose starch (MTPS) was synthesized by reactive extrusion in the presence of maleic anhydride (MA) as an esterification agent in a twin-screw extruder. The objective of this work was the preparation of reactive thermoplastic starch in the presence of glycerol and with different amounts of maleic anhydride (MA) and free-radical initiator, in order to improve processability and reactivity. The concentration of MA added varied from 2 to 6 wt% (of starch + glycerol), and the free-radical initiator, 2,5-bis(tert-butylperoxy)-2,5-dimethylhexane, also called Luperox 101, varied from 0.1 to 0.5 wt% (of starch + glycerol). Characterization of maleated thermoplastic starch was performed using dynamic light scattering and thermal analysis. Further, proof of chemically modified extrudate was determined by Fourier transform infrared spectroscopy and by soxhlet extraction with acetone. The modified high amylose corn starch (20 or 30% glycerol) could be pelletized and gave pellets that were more transparent than thermoplastic starches not modified with maleic anhydride. There was negligible change in hydrodynamic radius as the percentage of maleic anhydride increased. However, as the percentage of Luperox 101 increased, the hydrodynamic radius decreased. It could be inferred that the molecular weight decreased as the percentage of free-radical initiator increased. Using the maximum temperature in the extrusion process of 165 °C instead of 135 °C caused a decrease in the hydrodynamic radius, due to the high influence of the temperature profile on the molecular weight of the thermoplastic starch. The MTPS samples presented higher melting temperatures compared to TPS samples. The soxhlet studies indicated that the plasticizer, glycerol, was chemically linked to the starch. Using the maximum temperature of 165 °C versus 135 °C in the extrusion temperature profile resulted in more interaction between glycerol and starch.     

Using the residue of spirit production and bio-ethanol for protein production by yeasts

The residue (vinasse) formed during the distillation of bio-ethanol and cachaça, a traditional rum-type spirit produced from sugar-cane in Brazil, is highly harmful if discharged into the environment due to high values of COD and BOD. One possibility for minimizing the impact of vinasse in soils and waters is to use the residue in the production of microbial biomass for use as an animal feed supplement that will provide high levels on nitrogen (>9% d.m.) and low content of nucleic (?10% d.m.) This paper reports the production and quality of biomass produced from fermentation of Saccharomycescerevisiae and Candidaparapsilosis in culture media under 12 different culture conditions and the respective effects of each variable (glucose, yeast extract, peptone, potassium phosphate, vinasse, pH and temperature). Of the S. cerevisiae isolates tested, two (VR1 and PE2) originating from fuel alcohol-producing plants were identified as offering the best potential for the industrial production of single cell protein from vinasse due to highest biomass productivity. Our results showed a potential viable and economic use of vinasse.     

Rural fences in agricultural landscapes and their conservation role in an area of caatinga (dryland vegetation) in Northeast Brazil

Fences are very common in rural areas, and represent important landscape elements in both tropical and temperate climate regions. In spite of their marked presence and importance, fences have been little studied, principally in Brazil. The present study examined the types of fences, the diversity of species used in their construction, as well as the diversity of their uses in a rural community in the municipality of Caruaru, Pernambuco State, northeastern Brazil. Fifty meters of fence-line in each of 50 rural properties in the community were examined, noting the diameter, height and identity of all vegetation elements used in their composition. Semi-structured interviews were also held with their builders in order to obtain information concerning fence uses. In the total of 2,500 linear meters of fence-line, 4,953 individual plant elements were identified, belonging to 51 different species. A majority of the fence elements were non-living fence posts, although the number of living posts was high. Of the total number of fence elements, 66.7% were native to the caatinga region. The large number of native species used as non-living fence posts indicates an intensive use of the caatinga vegetation and suggests the need to stimulate the use of living fence posts for conservation purposes.     

Bushmeat consumption and its implications for wildlife conservation in the semi-arid region of Brazil

Hunting plays an important socioeconomic role in the semi-arid region of Brazil, by supplying meat and other products. Nevertheless, there is a lack of information on which species are most used by the local populations and what are the implications for conservation of exploited animals. This paper explores the bushmeat consumption in the Brazilian Caatinga region, where wild animals comprise an important protein source. A questionnaire was used to gather information from hunters, and the consumption of bushmeat by their families was monitored. Interviews revealed that 58 vertebrate species could potentially be consumed as bushmeat, but the samples provided by the monitored families comprised only 28 species. Birds were the animals most consumed, followed by mammals, although the biomass of both groups was similar. The consumption of bushmeat was not correlated with hunters’ socioeconomic data (income, age or schooling). Hunters recognized that the populations of some game species appeared to be declining, showing that bushmeat consumption, together with the cultural, economic and social aspects of the human populations involved in hunting, should be considered when discussing the conservation of animal resources in the Caatinga region.     

The ecological apparency hypothesis and the importance of useful plants in rural communities from northeastern Brazil: an assessment based on use value

The ecological apparency hypothesis in ethnobotanical studies predicts that the apparent plants (i.e., the most easily found in the vegetation) would be the most commonly collected and used by people. To test this hypothesis, it has been used the concept of use value (VU), which measures the relative importance of useful plants for a group of people. However, the use value has got some limitations, including the fact that it does not distinguish "current use" (plants which are effectively used) from "potential use" (well known plants, however not used). Therefore, this study has tested whether the obtained results through three different use value calculations could be useful in testing the ecological apparency hypothesis. These calculations have included the current use value, the potential use value, and the general use value. It has been carried out a vegetation survey and an interview for residents from the rural communities from Barrocas and Cachoeira (Soledade, Paraíba, Brazil). It has been used Spearman's coefficient to correlate phytosociological and ethnobotanical data. It has been observed that phytosociological parameters in Cachoeira were not correlated with any of the use values calculations, except the relationship between the current use value and the relative dominance (r(s)?=?0.57; p?相似文献   

Particulate matter in the indoor and outdoor air of a gymnasium and a fronton

An indoor/outdoor monitoring programme of PM₁₀ was carried out in two sports venues (a fronton and a gymnasium). Levels always below 50 μg m^?3 were obtained in the fronton and outdoor air. Due to the climbing chalk and the constant process of resuspension, concentrations above 150 μg m^?3 were registered in the gymnasium. The chalk dust contributed to CO₃ ^2? concentrations of 32?±?9.4 μg m^?3 in this sports facility, which represented, on average, 18 % of the PM₁₀ mass. Here, the carbonate levels were 128 times higher than those registered outdoors. Much lower concentrations, around 1 μg m^?3, were measured in the fronton. The chalk dust is also responsible for the high Mg²⁺ concentrations in the gym (4.7?±?0.89 μg m^?3), unfolding a PM₁₀ mass fraction of 2.7 %. Total carbon accounted for almost 30 % of PM₁₀ in both indoor spaces. Aerosol size distributions were bimodal and revealed a clear dependence on physical activities and characteristics of the sports facilities. The use of climbing chalk in the gymnasium contributed significantly to the coarse mode. The average geometric mean diameter, geometric standard deviation and total number of coarse particles were 0.77 μm, 2.79 cm^?3 and 28 cm^?3, respectively.     

Dibenzothiophene desulfurization by Gordonia alkanivorans strain 1B using recycled paper sludge hydrolyzate

Enzymatic hydrolyzates of recycled paper sludge were tested as suitable feedstock for biological desulfurization by Gordonia alkanivorans strain 1B. Only the hydrolyzate obtained after enzymatic mixture dialysis (dialyzed hydrolyzate) allowed dibenzothiophene (DBT) desulfurization, in spite of faster bacterial growth did occur on non-dialyzed hydrolyzate. For dialyzed hydrolyzate, 250microM DBT was consumed after 96h displaying a maximum specific productivity of 2-hydroxybiphenyl of 1.1micromol g(-1)(dry cell weight) h(-1). A comparison of the kinetics of biodesulfurization was assessed according to the type of hydrolyzate supplementation. Complete consumption of DBT was observed upon the addition of only phosphates and ammonia although further addition of zinc did increase the 2-hydroxybiphenyl production by 14%. Strain 1B was able to desulfurize a model oil containing DBT, 4-methylDBT and 4,6-dimethylDBT, reducing by 63% the total sulfur content in 168h.