Adsorption behavior of α -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of α -cypermethrin [R)-α -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-α-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze α -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time—24 hours for both cork (1–2 mm and 3–4 mm) and GAC. For the studied α -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1–2 mm have the maximum amount of adsorbed α-cypermethrin (q_m) (303 μg/g); followed by GAC (186 μ g/g) and cork 3-4 mm (136 μg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the α -cypermethrin adsorption phenomena on GAC, while α -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing α -cypermethrin from water.     

Global variability of food waste chemical composition and its consequences on the production of biofuels and chemical compounds

Journal of Material Cycles and Waste Management - The use of food waste (FW) for the production of biofuels and value-added compounds is growing worldwide. However, the significant chemical...     

Resilience thinking applied to fisheries management: perspectives for the mullet fishery in Southern-Southeastern Brazil

The mullet fishery system encompasses a complex arrange of ecological and socioeconomic factors interacting in multiple scales on the Southern-Southeastern Brazilian coast. Similarly, to other fisheries in developing countries, overfishing and poor governance have been threatening the resilience of the mullet fishery. In this paper, we explore aspects related to fisheries management from the perspective of the concept of resilience. The industrial and artisanal fishery sectors represent the different stakeholders. The main issues of concern are related to failures in the fisheries management to properly address equity in resource access and resource use sustainability among stakeholders. Asymmetry in technology and political and economic power affect food security and income generation especially for subsistence and small-scale fishing. Despite changes in rules-in-use, overfishing and conflicts between resource users are still relevant. Fishery dynamics and resource availability are greatly affected locally by forces such as pollution, urbanization, non-selective fishing, and regionally, by the El Niño Southern Oscillation (ENSO), and industrial (purse-seine) fishery. Considering the influence of ENSO on this fishery, a time span of at least 7 years to investigate this system could provide better answers to improve the management. Effective resilient fisheries should rely on three aspects. First, there should be a flexible fish allocation system based on ecosystem variability. Secondly, fish allocation should prioritize food security and poverty alleviation. Thirdly, a monitoring system should be implemented that takes into consideration ecosystem, fisheries and human dimensions to support a flexible and adaptive fisheries management, with resilient fisheries as an ultimate goal.     

Smoke emissions from biomass burning in a Mediterranean shrubland

Gaseous and particulate samples from the smoke from prescribed burnings of a shrub-dominated forest with some pine trees in Lousã Mountain, Portugal, in May 2008, have been collected. From the gas phase Fourier transform infrared (FTIR) measurements, an average modified combustion efficiency of 0.99 was obtained, suggesting a very strong predominance of flaming combustion. Gaseous compounds whose emissions are promoted in fresh plumes and during the flaming burning phase, such as CO₂, acetylene and propene, produced emission factors higher than those proposed for savannah and tropical forest fires. Emission factors of species that are favoured by the smouldering phase (e.g. CO and CH₄) were below the values reported in the literature for biomass burning in other ecosystems. The chemical composition of fine (PM_2.5) and coarse (PM_2.5–10) particles was achieved using ion chromatography (water-soluble ions), instrumental neutron activation analysis (trace elements) and a thermal–optical transmission technique (organic carbon and elemental carbon). Approximately 50% of the particulate mass was carbonaceous in nature with a clear dominance of organic carbon. The organic carbon-to-elemental carbon ratios up to 300, or even higher, measured in the present study largely exceeded those reported for fires in savannah and tropical forests. More than 30 trace elements and ions have been determined in smoke aerosols, representing in total an average contribution of about 7% to the PM₁₀ mass.     

Leaf morphoanatomy of species tolerant to excess iron and evaluation of their phytoextraction potential

Setaria parviflora (Poir.) Kerguélen and Paspalum urvillei Steudel are grasses that grow naturally in a soil with high iron contents. This study aimed to characterize morphoanatomically and histochemically the iron phytotoxicity on leaves and evaluate the phytoextraction potential of these grasses. Saplings were cultivated in hydroponic solution with and without excess Fe-EDTA. Regarding measurements taken on leaves, reduction was observed among treatments of Fe-EDTA on height values of abaxial epidermis and bundle sheath in both species. As for iron histolocalization, stronger reaction was observed in leaves of S. parviflora, in comparison with P. urvillei. Anatomical damage, such as protoplast retraction, irregular xylem, changes in cell volume, and cell collapse, and visual symptoms, like leaf bronzing, chlorosis, and necrosis, were similar in both species when exposed to excess iron; however, P. urvillei showed more severe damage. This species accumulated more iron in shoots than S. parviflora and therefore is more favorable for use in phytoextraction. The root system of both species accumulated higher iron concentrations in relation to shoots.     

Assessment of the ozone tolerance of two soybean cultivars (Glycine max cv. Sambaíba and Tracajá) cultivated in Amazonian areas

Brazilian soybean cultivars (Glycine max Sambaíba and Tracajá) routinely grown in Amazonian areas were exposed to filtered air (FA) and filtered air enriched with ozone (40 and 80 ppb, 6 h/day for 5 days) to assess their level of tolerance to this pollutant by measuring changes in key biochemical, physiological, and morphological indicators of injury and in enzymatic and non-enzymatic antioxidants. Sambaíba plants were more sensitive to ozone than Tracajá plants, as revealed by comparing indicator injury responses and antioxidant stimulations. Sambaíba exhibited higher visible leaf injury, higher stomatal conductance, and a severe decrease in the carbon assimilation rate. Higher ozone level (80 ppb) caused an increase in cell death in both cultivars. Levels of malondialdehyde and hydrogen peroxide also increased in Tracajá exposed under 80 ppb. Sambaíba plants exhibited decreases in ascorbate and glutathione levels and in enzymatic activities associated with these antioxidants. The higher tolerance of the Tracajá soybean appeared to be indicated by reduced physiological injuries and lower stomatal conductance, which might decrease the influx of ozone and enhance oxidation-reduction reactions involving catalase, ascorbate peroxidase, ascorbate, and glutathione, most likely stimulated by higher hydrogen peroxide.     

Biochemical responses in armored catfish (Pterygoplichthys anisitsi) after short-term exposure to diesel oil,pure biodiesel and biodiesel blends

Biodiesel fuel is gradually replacing petroleum-based diesel oil use. Despite the biodiesel being considered friendlier to the environment, little is known about its effects in aquatic organisms. In this work we evaluated whether biodiesel exposure can affect oxidative stress parameters and biotransformation enzymes in armored catfish (Pterygoplichthys anisitsi, Loricariidae), a South American endemic species. Thus, fish were exposed for 2 and 7 d to 0.01 mL L⁻¹ and 0.1 mL L⁻¹ of pure diesel, pure biodiesel (B100) and blends of diesel with 5% (B5) and 20% (B20) biodiesel. Lipid peroxidation (malondialdehyde) levels and the activities of the enzymes glutathione S-transferase, superoxide dismutase, catalase and glutathione peroxidase were measured in liver and gills. Also, DNA damage (8-oxo-7, 8-dihydro-2′-deoxyguanosine) levels in gills and 7-ethoxyresorufin-O-deethylase activity in liver were assessed. Pure diesel, B5 and B20 blends changed most of the enzymes tested and in some cases, B5 and B20 induced a higher enzyme activity than pure diesel. Antioxidant system activation in P. anisitsi was effective to counteract reactive oxygen species effects, since DNA damage and lipid peroxidation levels were maintained at basal levels after all treatments. However, fish gills exposed to B20 and B100 presented increased lipid peroxidation. Despite biodiesel being more biodegradable fuel that emits less greenhouse gases, the increased lipid peroxidation showed that biofuel and its blends also represent hazards to aquatic biota.     

Evaluation of the effect of different treatment methods on sugarcane vinasse remediation

Abstract

Sugarcane vinasse is a by-product obtained during ethanol production in sugar-ethanol plants. For each 1?L of ethanol produced approximately 11?L of vinasse are generated. As this residue is obtained in high amounts, it is used as fertilizer in sugarcane crops. However, despite being rich in nutrients, sugarcane vinasse is approximately one hundred times more polluting than domestic sewage, making it an environmental problem. Thus, the aim of the present study was to propose a treatment sequence for sugarcane vinasse and evaluate the possibility of energetic use of the generated sludge in the coagulation/flocculation stage. pH, conductivity, turbidity and decreases in UV/Vis absorption spectra were determined for each treatment step. In addition, the upper calorific value of the generated sludge was also determined, while ash (adsorption treatment) and catalyst (heterogeneous photocatalysis) characterizations were also carried out. At the end of the treatment, initial vinasse turbidity was reduced by 100% and pH and conductivity values were stabilized. The sludge presented a higher calorific value of approximately 3,000?kcal kg^?1 and the ash and catalyst displayed favorable characteristics to be applied to the sugarcane vinasse treatment stages.     

Oxidative DNA damage levels and catalase activity in the clam Ruditapes decussatus as pollution biomarkers of Tunisian marine environment

Levels of the oxidative DNA damage 7, 8-dihydro-8-oxo-2′-deoxyguanosine (8-oxodG) and catalase (CAT) activity were measured in the digestive gland and gills of clams Ruditapes decussatus, related to the presence of pollutants along Tunisian marine environment. Increased levels of CAT were observed in tissues of clams from all the sites studied, compared to control values, and elevated 8-oxodG levels were observed at specific sites. Results obtained in this work indicate that the measurement of 8-oxodG levels and CAT activity in tissues of R. decussatus is promising in pollution monitoring studies of the Tunisian marine environment.     

Development, validation and application of a method to analyze phenols in water samples by solid phase micro extraction-gas chromatography-flame ionization detector

In this work the development, validation and application of method using Solid Phase Microexctration (SPME) for the analyses of five pollutants (phenol, 2-nitrophenol, 2,4-dimethylphenol, 2,4-dichlorophenol and 4-chloro, 3-methyl phenol) in supplying water, using gas chromatography (GC) with flame ionization detector (FID) is described. The optimal conditions obtained for SPME were: fiber type: Poliacrylate (PA); extraction time: 40 minutes; extraction temperature: 70 degrees C; amount of salt added to sample (NaCl): 15%; desorption temperature: 8 minutes. The parameters studied in the method validation were: limit of detection (0.3 and 3.5 microg.L(- 1)); precision, measured by the variation coefficient (between 2.1 and 8.8%); calibration curve and linearity, by using the external standardization method (between 1 and 50 50 microg.L(- 1)). After the methodology development, samples of water collected in Atibaia River (S?o Paulo - Brazil) were analyzed, using the optimized methodology. Three water samples collected in the rain season showed a peak with retention time close to 4-chloro, 3 methyl phenol further analyzed by Gas Chromatography-Mass Spectrometry for the identity confirmation. In spite of the fact that none target compounds were found in the river water samples analyzed, the presence of two phenols different from those investigated (p-terc butyl phenol; butylated hydroxytoluene) were detected. These results together with the results of the limit of detection (that showed to be lower than the maximum concentration of phenols demanded by different environment control agencies), and the results of the validation, indicate the applicability of this method for the analysis of selected phenols in river water samples.