Spatial variation of acid-volatile sulfide and simultaneously extracted metals in Egyptian Mediterranean Sea lagoon sediments

In risk assessment of aquatic sediments, the immobilizing effect of acid-volatile sulfide (AVS) on trace metals is a principal control on availability and associated toxicity of metals to aquatic biota, which reduces metal bioavailability and toxicity by binding and immobilizing metals as insoluble sulfides. Spatial variation pattern of AVS, simultaneously extracted metals (SEM), and sediment characteristics were studied for the first time in surface sediment samples (0–20 cm) from 43 locations in Egyptian northern delta lagoons (Manzalah, Burullus, and Maryut) as predictors of the bioavailability of some divalent metals (Cu, Zn, Cd, Pb, and Ni) in sediments as well as indicators of metal toxicity in anaerobic sediments. The results indicated that the ∑SEM (Cu?+?Zn?+?Cd?+?Pb?+?Ni) values in sediments of lagoon Burullus had higher concentrations than those of Maryut and Manzalah. In contrast, AVS concentrations were considerably higher in lagoons Manzalah and Maryut and seemed to be consistent with the increase in organic matter than lagoon Burullus. Generally, the average concentrations of the SEM in all lagoons were in the order of Zn?>?Cu?>?Ni?>?Pb?>?Cd. The ratios of ∑SEM/AVS were less than 1 at all the sampling stations except at one station in lagoon Maryut as well as four stations located in lagoon Burullus (∑SEM/AVS?>?1), which suggests that the metals have toxicity potential in these sediments. Therefore, SEM concentrations probably are better indicators of the metal bioavailability in sediments than the conventional total metal concentrations.     

Groundwater quality assessment in the urban-west region of Zanzibar Island

This paper highlights the levels of anions (nitrate, nitrite, sulfate, bromide, chloride, and fluoride) and cations (potassium, sodium, magnesium, and calcium) in selected springs and groundwater sources in the urban-west region of Zanzibar Island. The levels of total dissolved solids (TDS) and sodium adsorption ratio (SAR) were also studied. Thirty water samples were collected in December 2012 from various types of water sources, which included closed hand-dug wells (CHDW), open hand-dug wells (OHDW), springwater (SW), public bore wells (PBW), and bore wells owned by private individuals (BWP), and analyzed after filtration and sometimes dilution. The cations were analyzed using inductively coupled plasma-optical emission spectrometry (ICP-OES). The anions were analyzed by chemically suppressed ion chromatography (IC). The ranges of the levels of the investigated parameters were as follows: Na 13.68–3,656 mg L^?1, K 2.66–583 mg L^?1, Mg 0.63–131.10 mg L^?1, Ca 16.79–189.9 mg L^?1, Cl^? 8.61–4,340.97 mg L^?1, F^? 0–1.02 mg L^?1, Br^? 0–10.88 mg L^?1, NO₃ ^? 0.18–342.4 mg L^?1, NO₂ ^? 0–1.39, SO₄ ^2? 4.43–534.02 mg L^?1, TDS 7–6,380 mg L^?1, and SAR 0.63–50. Except fluoride, most of the studied parameters in the water samples had concentrations beyond the permissible limits of the World Health Organization (WHO). The elevated concentrations are a result of seepage of contaminated water from on-site septic tanks, pit latrines, landfill leachates, fertilizer applications, and domestic effluents. These results should alert domestic water stakeholders in Zanzibar to the urgent task of initiating a quick mitigation response to control these alarming water risks.     

Assessment of nitrogen and phosphate balance and the roles of bacteria and viruses at the water-sediment interface in the Allal El Fassi reservoir (Morocco)

Balances of nitrogen and phosphate were studied in the Allal El Fassi reservoir (Morocco); the results showing that nitrogen input (296 mg m^?2 d^?1) was 161 % higher than output (183 mg m^?2 d^?1). Phosphate input (35.65 mg m^?2 d^?1) was 865 % higher than output (4.12 mg m^?2 d^?1), causing a progressive increase in the internal phosphate stock. Sedimentation flux was equally high (53.80 and 18 mg m^?2 d^?1) for both nitrogen and phosphate input, mainly from the Sebou River and in particulate form which immediately settles upon arrival in the reservoir. The release of nitrogen and phosphate from the sediment (5.40 and 1.15 mg m^?2 d^?1, respectively) depended on physicochemical and biological (bacteria and viruses) variability and the calcareous nature of the catchment basin. Calcium-bound phosphate prevailed in the reservoir. Drastic control of phosphate input is suggested to avoid accumulation of calcium-bound phosphate which may dissociate and thereby contribute to eutrophication.     

Effect of Building Orientations on Gaseous Dispersion in Street Canyon: a Numerical Study

This paper studies the effects of building orientations on the gaseous pollutant dispersion released from vehicles exhaust in street canyons through computational fluid dynamics (CFD) numerical simulations using three k–ε turbulence models. Four building orientations of the street canyon were examined in the atmospheric boundary layer. The numerical results were validated against wind-tunnel results to optimize the turbulence models. The numerical results agreed well with the wind-tunnel results. The simulation demonstrated that the minimum concentration at the human respiration height in the street canyon was on the windward side for the building orientations θ?=?112.5°, 135°, and 157.5°. The pollutant concentration level decreases as the building orientation increases from θ?=?90°. The concentration in the cavity region for the building orientation θ?=?90° was higher than for the wind directions θ?=?112.5°, 135°, and 157.5°. The wind velocity and turbulence energy increase as the building orientation increases. The finding from this work can be used to help urban designers and policy-makers in several aspects.     

Study on gas diffusion emitted from different height of point source

The flow and dispersion of stack-gas emitted from different elevated point source around flow obstacles in an urban environment have been investigated, using computational fluid dynamics models (CFD). The results were compared with the experimental results obtained from the diffusion wind tunnel under different conditions of thermal stability (stable, neutral or unstable). The flow and dispersion fields in the boundary layer in an urban environment were examined with different flow obstacles. Gaseous pollutant was discharged in the simulated boundary layer over the flat area. The CFD models used for the simulation were based on the steady-state Reynolds-Average Navier-Stoke equations (RANS) with kappa-epsilon turbulence models; standard kappa-epsilon and RNG kappa-epsilon models. The flow and dispersion data measured in the wind tunnel experiments were compared with the results of the CFD models in order to evaluate the prediction accuracy of the pollutant dispersion. The results of the CFD models showed good agreement with the results of the wind tunnel experiments. The results indicate that the turbulent velocity is reduced by the obstacles models. The maximum dispersion appears around the wake region of the obstacles.     

Seasonal variation of oxidative stress biomarkers in clams Ruditapes decussatus sampled from Tunisian coastal areas

Seven (7) sites from to the Tunisian coastal area were monitored through four seasons using several oxidative stress biomarkers including lipid peroxidation. Catalase (CAT) specific activity was determined in clam Ruditapes decussatus digestive gland. Lipid peroxidation was assessed in the same tissues using malondialdehyde (MDA) concentration, neutral lipid (NL) and lipofuscin accumulation. Results show that catalase specific activity varies between sites and fluctuates in time. The highest CAT activities were recorded in sites from Bizerta Lagoon and sites neighbouring Sfax city. Malondialdehyde accumulation in digestive gland cells seems to be very pronounced in animals sampled in summer and autumn. Digestive gland sections of clams sampled from reported heavy metal polluted sites exhibited higher volume density of residual bodies. Our results showed that the neutral lipids and lipofuscin content in clam's digestive gland are more sensitive to general stress as compared to other biomarkers, and could be used successfully in clams as early warning tools in field biomonitoring programs.     

Heavy metal and polycyclic aromatic hydrocarbons in Ebrié lagoon sediments, Côte d’Ivoire

Surface sediments throughout Ebrié lagoon, Côte d’Ivoire were collected in 2001 and analyzed for their heavy metal and polycyclic aromatic hydrocarbons (PAH) contaminant content. Geochemical maps of heavy metals (Cd, Cu, Zn, Fe, and Mn) in the surface sediment were produced based on geographical information system (GIS) technology. Heavy metals and PAH were detected at high concentration and provide evidence for several anthropogenic inputs to the lagoon. A significant spatial relationship was found for Fe, Zn, and Cu in the sediment using a GIS-based analysis, suggesting that these metal contaminants in the sediments of the Biétri bay had common sources.     

Eco-friendly synthesis of silver nanoparticles using green algae (<Emphasis Type="Italic">Caulerpa serrulata</Emphasis>): reaction optimization,catalytic and antibacterial activities

Stable colloidal silver nanoparticles (AgNPs) were synthesized using Caulerpa serrulata (green marine algae) aqueous extract as an efficient reducing and stabilizing agent. This method is considered to be a sustainable alternate to the more complicated chemical procedures. To achieve the optimization synthesis of AgNPs, several effects such as extract concentration, contact time, pH values, and temperature were examined. The synthesized AgNPs were characterized by UV–Vis spectroscopy, FT-IR, XRD, and HR-TEM. The synthesized AgNPs showed an intense surface plasmon resonance band at 412 nm at the optimal conditions (20% (v/v) extract and 95 °C). TEM reveal that higher extract concentration and higher temperature leading to the formation of spherical AgNPs with an average particle size of 10 ± 2 nm. The synthesized AgNPs showed excellent catalytic reduction activity of Congo red (CR) dye from aqueous solutions. The degradation percentage of CR with AgNPs accelerated by increasing either NaBH₄ concentration or catalytic dosage. The AgNPs synthesized at higher temperature (e.g., 10Ag-95) exhibited the highest catalytic activity. The reaction kinetics was found to be pseudo first order with respect to the dye concentration. Moreover, the AgNPs displayed antibacterial activity at lower concentration against Staphylococcus aureus, Pseudomonas aeruginosa, Shigella sp., Salmonella typhi, and Escherichia coli and may be a good alternative therapeutic approach. The outcomes of the current study confirmed that the synthesized AgNPs had an awesome guarantee for application in catalysis and wastewater treatment.     

Geochemical and solute transport modelling for CO2 storage, what to expect from it?

Geochemistry plays an important role when assessing the impact of CO₂ storage. Due to the potential corrosive character of CO₂, it might affect the chemical and physical properties of the wells, the reservoir and its surroundings and increase the environmental and financial risk of CO₂ storage projects in deep geological structures. An overview of geochemical and solute transport modelling for CO₂ storage purposes is given, its data requirements and gaps are highlighted, and its progress over the last 10 years is discussed. Four different application domains are identified: long-term integrity modelling, injectivity modelling, well integrity modelling and experimental modelling and their current state of the art is discussed. One of the major gaps remaining is the lack of basic thermodynamical and kinetic data at relevant temperature and pressure conditions for each of these four application domains. Real challenges are the coupled solute transport and geomechanical modelling, the modelling of impurities in the CO₂ stream and pore-scale modelling applications.     

Electrogenerative gold recovery from cyanide solutions using a flow-through cell with activated reticulated vitreous carbon

An electrogenerative flow-through reactor with an activated reticulated vitreous carbon cathode was developed. The influence of palladium-tin activation of the cathode towards gold deposition was studied by cyclic voltammetry. The reactor proved to be efficient in recovering more than 99% of gold within 4 h of operation. The performance of the reactor was evaluated with initial gold concentrations of 10, 100 and 500 mg L-1 and various electrolyte flow rates. Gold recovery was found to be strongly dependent on electrolyte flow rate and initial gold concentration in the cyanide solution under the experimental conditions used.