Bio-based composites from waste agricultural residues

The main objective of this research was to study the potential of waste agricultural residues such as sunflower stalk, corn stalk and bagasse fibers as reinforcement for thermoplastics as an alternative to wood fibers. The effects of two grades (Eastman G-3003 and G-3216) of coupling agents on the mechanical properties were also studied. In the sample preparation, one level of fiber loading (30 wt.%) and three levels of coupling agent content (0, 1.5 and 2.5 wt.%) were used. For overall trend, with addition of both grades of the coupling agents, tensile, flexural and impact properties of the composites significantly improved, as compared with untreated samples. In addition, morphological study revealed that the positive effect of coupling agent on interfacial bonding. The composites treated with G-3216 gave better results in comparison with G-3003. This could be caused by the high melt viscosity of G-3003. In general, bagasse fiber showed superior mechanical properties due to its chemical characteristics.     

A time series analysis of environmental and metrological factors impact on cutaneous leishmaniasis incidence in an endemic area of Dehloran,Iran

The aim of this study was to investigate the relationship between the environmental and metrological variables and cutaneous leishmaniasis (CL) transmission and its prediction in a region susceptible to this disease prevalence using a time series model. The accurate locations of 4437 CL diagnosed from 2011 to 2015 were obtained to be used in the time series model. Temperature, number of days with temperature over 30 °C, and number of earthquake were related to CL incidence using the Seasonal Auto-correlated Integrated Moving Average (SARIMA) model according to the Box-Jenkins method. In addition, the relationship between land use and surface soil type in 500- and 1000-m radius around the CL patients were investigated. The SARIMA models showed significant associations between environmental and meteorological variables and CL incidence adjusted for seasonality and auto-correlation. The result indicated that there are need more robust preventive programs in earthquake-prone areas with high temperature and inceptisol soil type than other areas. In addition, the region with these characteristics should be considered as high-risk areas for CL prevalence.     

Quantification of ionophores in aged poultry litter using liquid chromatography tandem mass spectrometry

Veterinary anticoccidials, biochemically known as ionophores, are widely used in poultry feed at therapeutic levels to treat Coccidiosis and at sub-therapeutic levels for growth- promotion. Commonly used ionophores in the US poultry industry are monensin, salinomycin, lasalocid and narasin. There is an increasing concern regarding the persistence of these anticoccidials in the environment. However, little attention has been directed to methods development for quantitatively measuring ionophores in complex environmental matrices such as poultry litters that are land applied. Here, we describe a rapid and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS)-based method developed for simultaneous quantification of monensin, lasalocid, salinomycin, and narasin in aged poultry litter samples. Results show significant level of monensin (97.8 ± 3.2 μg kg^?1), lasalocid (19.2 ± 6.6 μg kg^?1), salinomycin (70 ± 2.7 μg kg^?1) and narasin (57.3 ± 2.6 μg kg^?1) in poultry litter stored for over three years at < 5°C. Our findings indicate that even after several years of unmanaged storage of poultry litter, ionophores may continue to persist in this matrix, raising the possibility of prolonged release into the environment.     

Application of Satellite Microwave Images in Estimating Snow Water Equivalent1

Abstract: Flood forecast and water resource management requires reliable estimates of snow pack properties [snow depth and snow water equivalent (SWE)]. This study focuses on application of satellite microwave images to estimate the spatial distribution of snow depth and SWE over the Great Lakes area. To estimate SWE, we have proposed the algorithm which uses microwave brightness temperatures (Tb) measured by the Special Sensor Microwave Imager (SSM/I) radiometer along with information on the Normalized Difference Vegetation Index (NDVI). The algorithm was developed and tested over 19 test sites characterized by different seasonal average snow depth and land cover type. Three spectral signatures derived from SSM/I data, namely T19V‐T37V (GTV), T19H‐T37H (GTH), and T22V‐T85V (SSI), were examined for correlation with the snow depth and SWE. To avoid melting snow conditions, we have used observations taken only during the period from December 1‐February 28. It was found that GTH, and GTV exhibit similar correlation with the snow depth/SWE and are most should be used over deep snowpack. In the same time, SSI is more sensitive to snow depth variations over a shallow snow pack. To account for the effect of dense forests on the scattering signal of snow we established the slope of the regression line between GTV and the snow depth as a function of NDVI. The accuracy of the new technique was evaluated through its comparison with ground‐based measurements and with results of SWE analysis prepared by the National Operational Hydrological Remote Sensing Center (NOHRSC) of the National Weather Service. The proposed algorithm was found to be superior to previously developed global microwave SWE retrieval techniques.     

Role of organic matter in microbial transport during irrigation with sewage effluent

Reduction of migration of fecal coliforms (FC) and streptococci (FS) by limiting the leaching in effluent-irrigated soil was tested in lysimeters packed with quartz sand without or with added biosolids compost or with one of two clayey soils. The 200-L, 70-cm-deep lysimeters were either planted with a Eucalyptus camaldulensis or an Oroblanco citrus tree (in the sand only), or not planted. The Eucalyptus was irrigated with oxidation pond effluent (OPE) and the Oroblanco with mechanical-biological treatment plant effluent (MBTPE). The leaching fraction (LF) ranged from 0.2 to about 1.0, and the residence time (RT) from under 1 to 40 d. The Eucalyptus was also tested under intermittent leaching (RT 11-20 d) and deficit irrigation (without leaching for about 6 mo) regimes. Under MBTPE irrigation there was little or no leaching of FC and FS. Under OPE irrigation at LF 1 without a Eucalyptus there was little or no bacterial leaching at irrigation rates below 40 L d(-1) per lysimeter (RT > or = 0.8 d). Bacterial counts in the leachate were substantial in the presence of a Eucalyptus tree under LF 0.2 and intermittent leaching regimes, and when sand-packed unplanted lysimeters received OPE effluent at >45 L d(-1). Bacterial recovery peaked at LF 0.2, at up to 45% of the input level. At LF 1 (RT 0.6-2.8 d) and with intermittent leaching the recoveries were minute. Bacterial counts in the washout from the deficit-irrigated lysimeters were typical of nonpolluted soils. The bacterial concentration and recovery patterns in the leachate mostly matched the organic carbon (OC) load in the irrigation water, and its concentration and bioavailablity in the leachate. We related the leaching patterns of the fecal bacteria to their relative reproduction and die-off rates, and to the dependence of their regrowth on available carbon sources.     

Dissolution-induced preferential flow in a limestone fracture

Flow in a rock fracture is surprisingly sensitive to the evolution of flow paths that develop as a result of dissolution. Net dissolution may either increase or decrease permeability uniformly within the fracture, or may form a preferential flow path through which most of the injected fluid flows, depending on the prevailing ambient mechanical and chemical conditions. A flow-through test was completed on an artificial fracture in limestone at room temperature under ambient confining stress of 3.5 MPa. The sample was sequentially circulated by water of two different compositions through the 1500 h duration of the experiment; the first 935 h by tap groundwater, followed by 555 h of distilled water. Measurements of differential pressures between the inlet and the outlet, fluid and dissolved mass fluxes, and concurrent X-ray CT imaging and sectioning were used to characterize the evolution of flow paths within the limestone fracture. During the initial circulation of groundwater, the differential pressure increased almost threefold, and was interpreted as a net reduction in permeability as the contacting asperities across the fracture are removed, and the fracture closes. With the circulation of distilled water, permeability initially reduces threefold, and ultimately increases by two orders of magnitude. This spontaneous switch from net decrease in permeability, to net increase occurred with no change in flow rate or applied effective stress, and is attributed to the evolving localization of flow path as evidenced by CT images. Based on the X-ray CT characterizations, a flow path-dependent flow model was developed to simulate the evolution of flow paths within the fracture and its influence on the overall flow behaviors of the injected fluid in the fracture.     

Peroxidase activity,lignification and promotion of cell death in tobacco cells exposed to static magnetic field

Bio-effects of static magnetic fields on cell growth and cell death have been investigated in suspension-cultured tobacco cells as undifferentiated, embryonic plant cell model. The cells in their logarithmic growth phase were exposed to static magnetic field with the magnitudes of 10 mT and 30 mT for 5 h/day. Exposure to static magnetic field ceased the growth and caused an increase in cell death of exposed tobacco cells compared to those cells which were not treated with the field. Promotion of cell death was accompanied by a harmonized increase in the activity of peroxidase and increase of lignifcation of cell walls.     

Tracer diffusion from a horizontal fracture into the surrounding matrix: measurement by computed tomography

The vertical diffusion of NaI solution from a horizontal fracture into and within the surrounding matrix was tracked and quantified over time using an artificially fractured chalk core (30x5 cm) and a second-generation X-ray computed tomography (CT) scanner. The different tracer-penetration distances imaged in the matrix above and below the horizontal fracture are indicative of a greater tracer mass penetrating into the lower matrix. The enhanced transport in the matrix below the fracture was related to the Rayleigh-Darcy instability induced by the density differences between the heavier tracer solution in the fracture (1.038) and the distilled water that had initially resided in the matrix. Our observations suggest that below the fracture, the tracer is propagated by an advection-diffusion process that is characterized by both higher rates and higher concentrations relative to its propagation by diffusion above the fracture. The experimental results suggest that the prediction of contaminant migration in a rock intersected by both vertical and horizontal (e.g. along bedding planes) fractures is difficult because of density effects that result in different solute-penetration rates.