Simultaneous effect of shift work on blood pressure and lipid profile: a path analysis

The aim of this study was to assess the direct and indirect effects of shift work (SW) on the systolic blood pressure (SBP) and lipid profile of male workers. For this purpose, a cross-sectional study was conducted involving 6539 male workers of Esfahan Mobarakeh Steel Company. From all of the participants, 3065 (46.8%) were day workers and the remainder were shift workers. The results of path analysis revealed that the most effective variables on SBP were body mass index, fasting blood sugar, triglycerides and SW with a total effect of 0.241, 0.095, 0.064 and 0.056, respectively.     

Cadmium and copper heavy metal treatment from water resources by high-performance folic acid-graphene oxide nanocomposite adsorbent and evaluation of adsorptive mechanism using computational intelligence,isotherm, kinetic,and thermodynamic analyses

Environmental Science and Pollution Research - In this paper, folic acid–coated graphene oxide nanocomposite (FA-GO) is used as an adsorbent for the treatment of heavy metals including...     

Chicken manure biochar as liming and nutrient source for acid Appalachian soil

Acid weathered soils often require lime and fertilizer application to overcome nutrient deficiencies and metal toxicity to increase soil productivity. Slow-pyrolysis chicken manure biochars, produced at 350 and 700°C with and without subsequent steam activation, were evaluated in an incubation study as soil amendments for a representative acid and highly weathered soil from Appalachia. Biochars were mixed at 5, 10, 20, and 40 g kg into a Gilpin soil (fine-loamy, mixed, active, mesic Typic Hapludult) and incubated in a climate-controlled chamber for 8 wk, along with a nonamended control and soil amended with agronomic dolomitic lime (AgLime). At the end of the incubation, soil pH, nutrient availability (by Mehlich-3 and ammonium bicarbonate diethylene triamine pentaacetic acid [AB-DTPA] extractions), and soil leachate composition were evaluated. Biochar effect on soil pH was process- and rate-dependent. Biochar increased soil pH from 4.8 to 6.6 at the high application rate (40 g kg), but was less effective than AgLime. Biochar produced at 350°C without activation had the least effect on soil pH. Biochar increased soil Mehlich-3 extractable micro- and macronutrients. On the basis of unit element applied, increase in pyrolysis temperature and biochar activation decreased availability of K, P, and S compared to nonactivated biochar produced at 350°C. Activated biochars reduced AB-DTPA extractable Al and Cd more than AgLime. Biochar did not increase NO in leachate, but increased dissolved organic carbon, total N and P, PO, SO, and K at high application rate (40 g kg). Risks of elevated levels of dissolved P may limit chicken manure biochar application rate. Applied at low rates, these biochars provide added nutritional value with low adverse impact on leachate composition.     

Study of trace elements in wet atmospheric precipitation in Tehran,Iran

In this study, measurements of the trace metals Zn, Cd, Cr, Ni, Pb, Cu, Fe and Al were performed on 53 wet atmospheric precipitation samples (snow and rainwater) collected at a central site of Tehran. Samples were collected using a bulk sampler equipped with a high-density polyethylene funnel from November to May in 2011 and 2012 on the roof of a building in the city centre. Trace metals in the filtered samples were measured with ICP-MS. Statistical analysis of the results revealed that Al, which is principally a crustal-derived element, was the highest mean measured concentration. The pH ranged from 4.2 to 7.1 with a mean value of 5.1. Crustal enrichment factors (EF_c) related to the relative abundance of elements in crustal material was calculated using Al as reference crustal. EF_c calculations indicated that samples were not enriched with Fe and Cr but were, fairly to extremely, enriched with Zn, Cd, Ni, Pb and Cu. Factor component analysis with varimax-normalized rotation was conducted to find the probable sources of the measured species. This resulted in two factors with eigenvalues greater than unity. Factor 1 showed an anthropogenic source, mostly industrial combustion and local traffic emissions, for Zn, Cd, Ni, Pb, and Cu while factor 2 showed a crustal contribution for Al, Fe and Cr.     

Analysis of gross alpha, gross beta activities and beryllium-7 concentrations in surface air: their variations and statistical prediction model

Measurement of gross α, gross β activities and cosmogenic beryllium-7 (⁷Be) concentrations were made both daily and weekly during the years 2001–2004 from samples of atmospheric aerosols filtered from the air at Tehran Nuclear Research Center (35 41′ N) and Zahedan (28 29′ N). Weekly aerosol samples collected with the high-volume air samplers on cellulose filters were used to determine the ⁷Be contents of samples, using a semiconductor gamma spectrometer. Airborne dust samples were collected daily on fiber glass filters and used to determine the gross β and gross α activities with automatic beta analyzer and a ZnS(Ag) counter, respectively. In this work, the concentration and meteorological data were used to determine models for gross α, gross β and ⁷Be. The air concentrations of gross β and gross α activities and ⁷Be concentrations displayed lognormal distributions during the study period. Both β and ⁷Be have maximum activity concentrations during warm mid-year months.     

Introduction to the Air & Waste Management Association's 29th Annual Critical Review

Abstract

On-road mobile sources contribute substantially to ambient air concentrations of the carcinogens 1,3-butadiene, benzene, and polycyclic aromatic hydrocarbons (PAHs). The current study measured benzene and 1,3-butadiene at the Baltimore Harbor Tunnel tollbooth over 3-hr intervals on seven weekdays (n = 56). Particle-bound PAH was measured on a subset of three days. The 3-hr outdoor 1,3-butadiene levels varied according to time of day and traffic volume. The minimum occurred at night (12 a.m.–3 a.m.) with a mean of 2 µg/m³ (SD = 1.3, n = 7), while the maximum occurred during the morning rush hour (6 a.m.–9 a.m.) with a mean of 11.9 µg/m³ (SD = 4.6, n = 7). The corresponding traffic counts were 1413 (SD = 144) and 16,893 (SD = 692), respectively. During the same intervals, mean benzene concentration varied from 3 µg/m³ (SD = 3.1, n = 7) to 22.3 µg/m³ (SD = 7.6, n = 7). Median PAH concentrations ranged from 9 to 199 ng/m³. Using multivariate regression, a significant association (p < 0.001) between traffic and curbside concentration was observed. Much of the pollutant variability (1,3-butadiene 62%, benzene 77%, and PAH 85%) was explained by traffic volume, class, and meteorology. Results suggest >2-axle vehicles emit 60, 32, and 9 times more PAH, 1,3-butadiene, and benzene, respectively, than do 2-axle vehicles. This study provides a model for estimating curbside pollution levels associated with traffic that may be relevant to exposures in the urban environment.     

Revealing source signatures in ambient BTEX concentrations

Management of ambient concentrations of Volatile Organic Compounds (VOCs) is essential for maintaining low ozone levels in urban areas where its formation is under a VOC-limited regime. The significant decrease in traffic-induced VOC emissions in many developed countries resulted in relatively comparable shares of traffic and non-traffic VOC emissions in urban airsheds. A key step for urban air quality management is allocating ambient VOC concentrations to their pertinent sources. This study presents an approach that can aid in identifying sources that contribute to observed BTEX concentrations in areas characterized by low BTEX concentrations, where traditional source apportionment techniques are not useful. Analysis of seasonal and diurnal variations of ambient BTEX concentrations from two monitoring stations located in distinct areas reveal the possibility to identify source categories. Specifically, the varying oxidation rates of airborne BTEX compounds are used to allocate contributions of traffic emissions and evaporative sources to observed BTEX concentrations.     

Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement.

One of the environmental issues in most regions of Iran is the large number of bottles made from poly-ethylene terephthalate (PET) deposited in domestic wastes and landfills. Due to the high volume of these bottles, more than 1 million m3 landfill space is needed for disposal every year. The purpose of this experimental study was to investigate the possibility of using PET waste in asphalt concrete mixes as aggregate replacement (Plastiphalt) to reduce the environmental effects of PET disposal. For this purpose the mechanical properties of plastiphalt mixes were compared with control samples. This study focused on the parameters of Marshall stability, flow, Marshall quotient (stability-to-flow ratio) and density. The waste PET used in this study was in the form of granules of about 3 mm diameter which would replace (by volume) a portion of the mineral coarse aggregates of an equal size (2.36-4.75 mm). In all prepared mixes the determined 6.6% optimum bitumen content was used. In this investigation, five different percentages of coarse aggregate replacement were used. The results showed that the aggregate replacement of 20% by volume with PET granules would result in a reduction of 2.8% in bulk compacted mix density. The value of flow in the plastiphalt mix was lower than that of the control samples. The results also showed that when PET was used as partial aggregate replacement, the corresponding Marshall stability and Marshall quotient were almost the same as for the control samples. According to most of specification requirement, these results introduce an asphalt mix that has properties that makes it suitable for practical use and furthermore, the recycling of PET for asphalt concrete roads helps alleviate an environmental problem and saves energy.     

Self body-size perception in an insect

Animals negotiating complex environments encounter a wide range of obstacles of different shapes and sizes. It is greatly beneficial for the animal to react to such obstacles in a precise, context-specific manner, in order to avoid harm or even simply to minimize energy expenditure. An essential key challenge is, therefore, an estimation of the animal’s own physical characteristics, such as body size. A further important aspect of self body-size perception (or SBSP) is the need to update it in accordance with changes in the animal’s size and proportions. Despite the major role of SBSP in functional behavior, little is known about if and how it is mediated. Here, we demonstrate that insects are also capable of self perception of body size and that this is a vital factor in allowing them to adjust their behavior following the sudden and dramatic growth associated with periodic molting. We reveal that locusts’ SBSP is strongly correlated with their body size. However, we show that the dramatic change in size accompanying adult emergence is not sufficient to create a new and updated SBSP. Rather, this is created and then consolidated only following the individuals’ experience and interaction with the physical environment. Behavioral or pharmacological manipulations can both result in maintenance of the old larval SBSP. Our results emphasize the importance of learning and memory-related processes in the development and update of SBSP, and highlight the advantage of insects as good models for a detailed study on the neurobiological and molecular aspects of SBSP.