Diapycnal Mixing in the Thermocline of Lakes: Estimations by Different Methods

In order to evaluate the performance of different methods for estimation of the vertical eddy diffusivity in thermally stratified lakes, two field studies were conducted in Lake Biwa, Japan and Lake Kinneret, Israel. Lake Biwa experienced three typhoons during the campaign while Lake Kinneret experienced high winds in the afternoons. Microstructure profiles were collected by a portable flux profiler (PFP) during calm and disturbed periods. Then, the vertical eddy diffusivity was estimated by three indirect methods. The estimated vertical eddy diffusivities varied more than one order of magnitude, from 4.7× 10⁻⁷ to 7.7× 10⁻⁶ m² s⁻¹. The comparison of results with previous buoyancy flux measurements and scaling arguments showed that the Dillon–Park’s method is not appropriate and Osborn–Cox method performs better than Osborn method in the studied case. Furthermore, the low value of vertical eddy diffusivity within the thermocline suggests that within the thermocline of these lakes, diffusive vertical transport can be neglected.     

Introduction to the Air & Waste Management Association's 29th Annual Critical Review

Abstract

On-road mobile sources contribute substantially to ambient air concentrations of the carcinogens 1,3-butadiene, benzene, and polycyclic aromatic hydrocarbons (PAHs). The current study measured benzene and 1,3-butadiene at the Baltimore Harbor Tunnel tollbooth over 3-hr intervals on seven weekdays (n = 56). Particle-bound PAH was measured on a subset of three days. The 3-hr outdoor 1,3-butadiene levels varied according to time of day and traffic volume. The minimum occurred at night (12 a.m.–3 a.m.) with a mean of 2 µg/m³ (SD = 1.3, n = 7), while the maximum occurred during the morning rush hour (6 a.m.–9 a.m.) with a mean of 11.9 µg/m³ (SD = 4.6, n = 7). The corresponding traffic counts were 1413 (SD = 144) and 16,893 (SD = 692), respectively. During the same intervals, mean benzene concentration varied from 3 µg/m³ (SD = 3.1, n = 7) to 22.3 µg/m³ (SD = 7.6, n = 7). Median PAH concentrations ranged from 9 to 199 ng/m³. Using multivariate regression, a significant association (p < 0.001) between traffic and curbside concentration was observed. Much of the pollutant variability (1,3-butadiene 62%, benzene 77%, and PAH 85%) was explained by traffic volume, class, and meteorology. Results suggest >2-axle vehicles emit 60, 32, and 9 times more PAH, 1,3-butadiene, and benzene, respectively, than do 2-axle vehicles. This study provides a model for estimating curbside pollution levels associated with traffic that may be relevant to exposures in the urban environment.     

Study of trace elements in wet atmospheric precipitation in Tehran,Iran

In this study, measurements of the trace metals Zn, Cd, Cr, Ni, Pb, Cu, Fe and Al were performed on 53 wet atmospheric precipitation samples (snow and rainwater) collected at a central site of Tehran. Samples were collected using a bulk sampler equipped with a high-density polyethylene funnel from November to May in 2011 and 2012 on the roof of a building in the city centre. Trace metals in the filtered samples were measured with ICP-MS. Statistical analysis of the results revealed that Al, which is principally a crustal-derived element, was the highest mean measured concentration. The pH ranged from 4.2 to 7.1 with a mean value of 5.1. Crustal enrichment factors (EF_c) related to the relative abundance of elements in crustal material was calculated using Al as reference crustal. EF_c calculations indicated that samples were not enriched with Fe and Cr but were, fairly to extremely, enriched with Zn, Cd, Ni, Pb and Cu. Factor component analysis with varimax-normalized rotation was conducted to find the probable sources of the measured species. This resulted in two factors with eigenvalues greater than unity. Factor 1 showed an anthropogenic source, mostly industrial combustion and local traffic emissions, for Zn, Cd, Ni, Pb, and Cu while factor 2 showed a crustal contribution for Al, Fe and Cr.     

Adsorption of Crystal Violet Dye from Aqueous Solution by Poly(Acrylamide-<Emphasis Type="Italic">co</Emphasis>-Maleic Acid)/Montmorillonite Nanocomposite

Poly(acrylamide-co-maleic acid)/montmorillonite nanocomposites, were synthesized via in situ polymerization with different maleic acid and MMT content. The capability of the hydrogel for adsorption of crystal violet (CV) was investigated in aqueous solutions at different pH values and temperatures. The pseudo-second-order kinetics model could fit successfully the adsorption kinetic data. The effects of maleic acid to acrylamide molar ratio (MA_R), weight percent of MMT (MMT%), the pH of medium and the solution temperature (T) on the CV adsorption capacity (q _e ) of adsorbents were studied by Taguchi experimental design approach. The results indicated that increasing the MMT% leads to a greater q _e . The q _e value of adsorbents increased also with increasing both MA_R and pH, while reduced when the temperature of medium increased. The relatively optimum conditions to achieve a maximum CV adsorption capacity for P(AAm/MA)/MMT adsorbents were found as: 0.06 for MA_R and 5 % of MMT%, medium pH = 7 and T = 20 °C.     

Simultaneous effect of shift work on blood pressure and lipid profile: a path analysis

The aim of this study was to assess the direct and indirect effects of shift work (SW) on the systolic blood pressure (SBP) and lipid profile of male workers. For this purpose, a cross-sectional study was conducted involving 6539 male workers of Esfahan Mobarakeh Steel Company. From all of the participants, 3065 (46.8%) were day workers and the remainder were shift workers. The results of path analysis revealed that the most effective variables on SBP were body mass index, fasting blood sugar, triglycerides and SW with a total effect of 0.241, 0.095, 0.064 and 0.056, respectively.     

Starting improvement of micro-wind turbines operating in low wind speed regions

The study deals with the design and optimization of external and internal geometry of micro-wind turbines blades. A specified objective function which consists of the power coefficient and the starting time was defined and the genetic algorithm optimization technique in conjunction with the blade-element momentum theory was adopted to find the geometry of the blades including the distributions of the chord, the twist angle and also the shell thickness. Moreover, the allowable stress of the blades was considered as a constraint to the objective function. Results show that a reasonable compromise is achievable such that the starting time of the blades reduces noticeably in return for a small drop in the power coefficient. The significant improvement of the hollow blades over the solid ones indicates that the power coefficient and the starting performance could be improved through the appropriate distributions of the considered decision variables, i.e. the chord, the twist angle and also the shell thickness.     

Ethmocephaly caused by de novo translocation 18;21—prenatal diagnosis

Ethmocephaly is a rare anomaly associated with partial failure of cleavage of the prosencephalon. Morphologically, it is closely related to cyclopia. We present an extremely rare case of ethmocephaly diagnosed in utero and caused by an unbalanced de novo translocation 18;21. Copyright © 2003 John Wiley & Sons, Ltd.     

Microbial and size characterization of airborne particulate matter collected on sticky tapes along US–Mexico border

Particulate matter(PM) emissions from various sources can affect significantly human health and environmental quality especially in the Chihuahuan Desert region along US–Mexico border. The objective of this study was to use the low-cost sticky tape method to collect airborne PM for size characterization and identification of fungal spores. Sticky tape samplers were placed at 1.0 and 2.0 m above the ground surface at experimental sites in Ciudad Juárez, Mexico and at 0.6, 1.2 and 1.8 m at New Mexico sites, USA. Soil samples were collected in both countries to determine fungal diversity, texture and moisture content Dust particles collected from all of the experimental sites had a dominant texture of clay( 0.002 mm). The dominant textures identified from soil samples collected from the US and Mexican sites were loam and sandy clay loam, respectively. Alternaria, Penicillium and Fusarium were frequently found funguses in the US sites while Alternaria and Aspergillus were commonly observed in the Mexican sites. The sticky tapes also showed a similar diversity of fungal microorganisms present in the airborne PM at both Mexico and US sites Alternaria, Penicillium and Aspergillus were the three groups of airborne fungal microorganisms consistently present in the US and Mexican sites. The low-cost sticky tape method has the potential to be used for characterizing different airborne microorganisms and dust particles.     

Rheological Investigation of Wood-Polypropylene Composites in Rotational Plate Rheometer

In this research work, the rheological properties of Wood-Plastic Composites (WPC) with some selected compositions are investigated. WPC is being recognized as a green composite that, in the past 20?years, has emerged to a commercial product. A study on rheological properties of these materials can give insight into the proper selection of composition and processing condition. Two grades of polypropylene (PP) with two different melt flow indexes (MFI) were selected to prepare WPCs with three different wood contents (50, 60 and 70?% wt.). Four types of rheological experiments were performed utilizing a rotational plate rheometer: (1) strain sweep, (2) frequency sweep, (3) temperature sweep and (4) steady shear rate sweep. The independent variables were chosen as wood content, MFI of polymer (two types), melt temperature, frequency or shear rate, the gap between the plates, and strain percentage. The strain sweep tests specified the linear and non-linear viscoelastic zones of each experiment. The results of frequency sweep experiments indicated that increasing the wood content and frequency and also decreasing the strain percentage and the gap distance, lead to an increase in the storage modulus. Regarding the loss modulus, wood percentage and the gap distance presented positive effects and strain percentage showed a negative effect. The behavior of complex viscosity was almost similar to that of the storage modulus but increasing the frequency caused a decrease in the complex viscosity. In case of temperature sweep experiments, it was observed that the rheological properties exhibit a rapid change near to a temperature of 160?°C. The results also showed that beyond this point, increasing the wood content and also MFI of polypropylene caused an increase in the storage modulus. The results of steady shear rate sweep experiments specified that increasing wood content and also decreasing the MFI of PP, the gap distance and shear rate lead to an increase in both viscosity and shear stress.