Tropospheric Ozone in Tehran,Iran, during the last 20 years

Environmental Geochemistry and Health - Air pollution and its effects on human health and the environment are one of the main concerns in urban areas. This study focuses on the distribution and...     

Effect of biocides on the precipitation of calcium fluoride in the presence of anionic copolymeric inhibitors

The inhibitory efficiency of anionic copolymers and the effect of the biocides sodium hypochlorite, glutaraldehyde, and tris(hydroxymethyl)nitromethane on the precipitation behavior of calcium fluoride (CaF₂) were studied. The efficiency of polymeric inhibitors was traced from conductivity measurements by using half-life (t_1/2) method. X-ray diffraction parameters have been measured for calcium fluoride scale minerals. An anionic copolymer (K-798) acts as one of the best inhibitors for the precipitation process of the calcium fluoride in water as compared to K-775. It is assigned to the fact that the copolymer (K-798) contains both sulfonic acid and sulfonated styrene groups while the polymer (K-775) having only the sulfonic acid group. It was further observed that the biocides have no appreciable effect on the performance of the anionic polymeric inhibitors.     

Environmental monitoring of complex hydrocarbon mixtures in water and soil samples after solid phase microextraction using PVC/MWCNTs nanocomposite fiber

A novel nanocomposite based on incorporation of multiwalled carbon nanotubes (MWCNTs) in polyvinyl chloride (PVC) was prepared. Proposed nanocomposite was coated on stainless steel wire by deep coating. Composition of nanocomposite was optimized based on results of morphological studies using scanning electron microscopy. The best composition (83% MWCNTs:17% PVC) was applied as a solid phase microextraction fiber. Complex mixture of aromatic (BTEX) and aliphatic hydrocarbons (C₅–C₃₄) were selected as model analytes, and performance of proposed fiber in extraction of the studied compounds from water and soil samples was evaluated. Analytical merits of the method for water samples (LODs = 0.10–1.10 ng L⁻¹, r² = 0.9940–0.9994) and for soil samples (LODs = 0.10–0.77 ng kg⁻¹, r² = 0.9946–0.9994) showed excellent characteristics of it in ultra trace determination of petroleum type environmental pollutants. Finally, the method was used for determination of target analytes in river water, industrial effluent and soil samples.     

Aquaculture practices and potential human health risks: current knowledge and future priorities

Annual global aquaculture production has more than tripled within the past 15 years, and by 2015, aquaculture is predicted to account for 39% of total global seafood production by weight. Given that lack of adequate nutrition is a leading contributor to the global burden of disease, increased food production through aquaculture is a seemingly welcome sign. However, as production surges, aquaculture facilities increasingly rely on the heavy input of formulated feeds, antibiotics, antifungals, and agrochemicals. This review summarizes our current knowledge concerning major chemical, biological and emerging agents that are employed in modern aquaculture facilities and their potential impacts on public health. Findings from this review indicate that current aquaculture practices can lead to elevated levels of antibiotic residues, antibiotic-resistant bacteria, persistent organic pollutants, metals, parasites, and viruses in aquacultured finfish and shellfish. Specific populations at risk of exposure to these contaminants include individuals working in aquaculture facilities, populations living around these facilities, and consumers of aquacultured food products. Additional research is necessary not only to fully understand the human health risks associated with aquacultured fish versus wild-caught fish but also to develop appropriate interventions that could reduce or prevent these risks. In order to adequately understand, address and prevent these impacts at local, national and global scales, researchers, policy makers, governments, and aquaculture industries must collaborate and cooperate in exchanging critical information and developing targeted policies that are practical, effective and enforceable.     

Flows across high aspect ratio street canyons: Reynolds number independence revisited

The Reynolds number for flow in a street canyon, Re?=?U_refH/ν (where U_ref is a reference velocity, H the street canyon height, and ν the kinematic viscosity), cannot be matched between reduced-scale experiments and full-scale field measurements. This mismatch is often circumvented by satisfying the Re independence criterion, which states that above a critical Re (Re_c), the flow field remains invariant with Re. Re_c?=?11,000 is often adopted in reduced-scale experiments. In deep street canyons with height-to-width aspect ratio ≥?1.5, reduced-scale experiments have shown two recirculation vortices induced by the mean flows, but full-scale field measurements have observed only one vortex. We investigated this discrepancy by conducting water channel experiments with Re between 10⁴ and 10⁵ at three aspect ratios. The canyons with aspect ratio 1.0 have Re_c?=?11,000, the canyons with aspect ratio 1.5 have Re_c between 31,000 and 58,000, while the canyons with aspect ratio 2.0 have Re_c between 57,000 and 87,000. Therefore, the widely adopted Re_c?=?11,000 is not applicable for canyons with aspect ratio greater than 1.5. Our results also confirm that there is only one vortex in deep canyons at high Re. This single-vortex flow regime could change our fundamental understanding of deep canyons, which are often assumed to exhibit multiple-vortex flow regimes. Applications such as numerical model validation based on the multiple-vortex regime should be revisited. Our experimental data with Re up to 10⁵ could be used to validate numerical models at high Re.     

The mobile source effect on curbside 1,3-butadiene,benzene, and particle-bound polycyclic aromatic hydrocarbons assessed at a tollbooth

On-road mobile sources contribute substantially to ambient air concentrations of the carcinogens 1,3-butadiene, benzene, and polycyclic aromatic hydrocarbons (PAHs). The current study measured benzene and 1,3-butadiene at the Baltimore Harbor Tunnel tollbooth over 3-hr intervals on seven weekdays (n = 56). Particle-bound PAH was measured on a subset of three days. The 3-hr outdoor 1,3-butadiene levels varied according to time of day and traffic volume. The minimum occurred at night (12 a.m.-3 a.m.) with a mean of 2 microg/m3 (SD = 1.3, n = 7), while the maximum occurred during the morning rush hour (6 a.m.-9 a.m.) with a mean of 11.9 microg/m3 (SD = 4.6, n = 7). The corresponding traffic counts were 1413 (SD = 144) and 16,893 (SD = 692), respectively. During the same intervals, mean benzene concentration varied from 3 microg/m3 (SD = 3.1, n = 7) to 22.3 microg/m3 (SD = 7.6, n = 7). Median PAH concentrations ranged from 9 to 199 ng/m3. Using multivariate regression, a significant association (p < 0.001) between traffic and curbside concentration was observed. Much of the pollutant variability (1,3-butadiene 62%, benzene 77%, and PAH 85%) was explained by traffic volume, class, and meteorology. Results suggest > 2-axle vehicles emit 60, 32, and 9 times more PAH, 1,3-butadiene, and benzene, respectively, than do 2-axle vehicles. This study provides a model for estimating curbside pollution levels associated with traffic that may be relevant to exposures in the urban environment.     

Sequential extraction of heavy metals during composting of sewage sludge

The major limitation of soil application of sewage sludge compost is the total heavy metal contents and their bioavailability to the soil-plant system. This study was conducted to determine the heavy metal speciation and the influence of changing the physico-chemical properties of the medium in the course of composting on the concentrations, bioavailability or chemical forms of Cu, Zn, Pb and Ni in sewage sludge. Principal physical and chemical properties and FTIR spectroscopical characterization of sludge compost during treatment show the stability and maturity of end product. The total metal contents in the final compost were much lower than the limit values of composts to be used as good soil fertilizer. Furthermore, it was observed by using a sequential extraction procedure in sludge compost at different steps of treatment, that a large proportion of the heavy metals were associated to the residual fraction (70-80%) and more resistant fractions to extraction X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of metals bound to bioavailable fractions X-(KNO3+H2O). Heavy metal distribution and bioavailability show some changes during composting depending on the metal itself and the physico-chemical properties of the medium. Bioavailable fractions of all elements tend to decrease except Ni-H2O. Zn and mainly Cu present more affinity to organic and carbonate fractions. In contrast, Pb is usually preferentially bound to sulfide forms X-HNO3. Nickel shows a significant decrease of organic form. Significant degrees of correlation were found between heavy metal fractions and changes of some selected variables (e.g. pH, ash, organic matter, humic substance) during the course of composting. Mobile fractions of metals are poorly predictable from the total content. The R2 value was significantly increased by the inclusion of other variables such as the amount of organic matter (OM) and pH.     

Diapycnal Mixing in the Thermocline of Lakes: Estimations by Different Methods

In order to evaluate the performance of different methods for estimation of the vertical eddy diffusivity in thermally stratified lakes, two field studies were conducted in Lake Biwa, Japan and Lake Kinneret, Israel. Lake Biwa experienced three typhoons during the campaign while Lake Kinneret experienced high winds in the afternoons. Microstructure profiles were collected by a portable flux profiler (PFP) during calm and disturbed periods. Then, the vertical eddy diffusivity was estimated by three indirect methods. The estimated vertical eddy diffusivities varied more than one order of magnitude, from 4.7× 10⁻⁷ to 7.7× 10⁻⁶ m² s⁻¹. The comparison of results with previous buoyancy flux measurements and scaling arguments showed that the Dillon–Park’s method is not appropriate and Osborn–Cox method performs better than Osborn method in the studied case. Furthermore, the low value of vertical eddy diffusivity within the thermocline suggests that within the thermocline of these lakes, diffusive vertical transport can be neglected.     

Identifying high-yield low-emission pathways for the cereal production in South Asia

Increasing agricultural production to meet the growing demand for food whilst reducing agricultural greenhouse gas (GHG) emissions is the major challenge under the changing climate. To develop long-term policies that address these challenges, strategies are needed to identify high-yield low-emission pathways for particular agricultural production systems. In this paper, we used bio-physical and socio-economic models to analyze the impact of different management practices on crop yield and emissions in two contrasting agricultural production systems of the Indo-Gangetic Plain (IGP) of India. The result revealed the importance of considering both management and socio-economic factors in the development of high-yield low-emission pathways for cereal production systems. Nitrogen use rate and frequency of application, tillage and residue management and manure application significantly affected GHG emissions from the cereal systems. In addition, various socio-economic factors such as gender, level of education, training on climate change adaptation and mitigation and access to information significantly influenced the adoption of technologies contributing to high-yield low-emission pathways. We discussed the policy implications of these findings in the context of food security and climate change.     

Workplace incivility: A review of the literature and agenda for future research

A growing body of research explores workplace incivility, defined as low‐intensity deviant workplace behavior with an ambiguous intent to harm. In the 15 years since the theoretical introduction of the workplace incivility construct, research in this domain has taken off, albeit in a variety of directions. We review the extant body of research on workplace incivility and note the multitude of samples, sources, methodologies, and instrumentation used. In this review article, we provide an organized review of the extant body of work that encompasses three distinct types of incivility: experienced, witnessed, and instigated incivility. These three types of incivility serve as the foundation for a series of comprehensive models in which we integrate extant empirical research. In the last part of this review article, we suggest directions for future research that may contribute to this growing body of work. Copyright © 2014 John Wiley & Sons, Ltd.