Modeling the relationship between carbon emissions and environmental sustainability during COVID-19: a new evidence from asymmetric ARDL cointegration approach

Environment, Development and Sustainability - The study aims to examine the CO2 emissions by considering the implication of COVID-19 under strict lockdown in India. The nonlinear (asymmetric)...     

Development,Malaria and Adaptation to Climate Change: A Case Study from India

India has reasons to be concerned about climate change. Over 650 million people depend on climate-sensitive sectors, such as rain-fed agriculture and forestry, for livelihood and over 973 million people are exposed to vector borne malarial parasites. Projection of climatic factors indicates a wider exposure to malaria for the Indian population in the future. If precautionary measures are not taken and development processes are not managed properly some developmental activities, such as hydro-electric dams and irrigation canal systems, may also exacerbate breeding grounds for malaria. This article integrates climate change and developmental variables in articulating a framework for integrated impact assessment and adaptation responses, with malaria incidence in India as a case study. The climate change variables include temperature, rainfall, humidity, extreme events, and other secondary variables. Development variables are income levels, institutional mechanisms to implement preventive measures, infrastructure development that could promote malarial breeding grounds, and other policies. The case study indicates that sustainable development variables may sometimes reduce the adverse impacts on the system due to climate change alone, while it may sometimes also exacerbate these impacts if the development variables are not managed well and therefore they produce a negative impact on the system. The study concludes that well crafted and well managed developmental policies could result in enhanced resilience of communities and systems, and lower health impacts due to climate change.     

Performance evaluation of six different aerosol samplers in a particulate matter generation chamber

The present study was carried out with the aim of evaluating the performance of six different aerosol samplers in terms of mass concentration, particle size distribution, and mass fraction for the international size-sampling conventions. The international size-sampling criteria were defined as inhalable, thoracic, and respirable mass fractions with 50% cutoff at an aerodynamic equivalent diameter of 100 μm, 10 μm, and 4 μm, respectively. Two Andersen, four total suspended particulate (TSP), two RespiCon, four PM₁₀, two DustTrak, and two SidePak samplers were selected and tested to quantitatively estimate human exposure in a carefully controlled particulate matter (PM) test chamber. The overall results indicate that (1) Andersen samplers underestimate total suspended PM and overestimate thoracic and respirable PM due to particle bounce and carryover between stages, (2) TSP samplers provide total suspended PM as reference samplers, (3) TSP samplers quantified by a coulter counter multisizer provide no information below an equivalent spherical diameter of 2 μm and therefore underestimate respirable PM, (4) RespiCon samplers are free from particle bounce as inhalable samplers but underestimate total suspended PM, (5) PM₁₀ samplers overestimate thoracic PM, and (6) DustTrak and SidePak samplers provide relative PM concentrations instead of absolute PM concentrations.     

Ambient air quality during wheat and rice crop stubble burning episodes in Patiala

Open crop stubble burning events were observed in and around Patiala city, India. A ground level study was deliberated to analyze the contribution of wheat (Triticum aestivum) and rice (Oriza sativa) crop stubble burning practices on concentration levels of aerosol, SO₂ and NO₂ in ambient air at five different sites in and around Patiala city covering agricultural, commercial and residential areas. Aerosols were collected on GMF/A and QMF/A (Whatman) sheets for a 24 h period throughout the year in 2007. Simultaneously, sampling of SO₂ and NO₂ was conducted and results obtained during stubble burning periods were compared to the non-stubble burning periods. Results clearly pointed out a distinct increase in aerosol, SO₂ and NO₂ levels during the crop stubble burning periods.     

Estimating the contribution of point sources to atmospheric metals using single-particle mass spectrometry

Single-particle mass spectra were collected using an Aerosol Time-of-Flight Mass Spectrometer (ATOFMS) during December of 2003 and February of 2004 at an industrially impacted location in East St. Louis, IL. Hourly integrated peak areas for twenty ions were evaluated for their suitability in representing metals/metalloids, particularly those reported in the US EPA Toxic Release Inventory (TRI). Of the initial twenty ions examined, six (Al, As, Cu, Hg, Ti, and V) were found to be unsuitable due to strong isobaric interferences with commonly observed organic fragments, and one (Be) was found to have no significant signal. The usability of three ions (Co, Cr, and Mn) was limited due to suspected isobaric interferences based on temporal comparisons with commonly observed organic fragments. The identity of the remaining ions (Sb, Ba, Cd, Ca, Fe, Ni, Pb, K, Se, and Zn) was substantiated by comparing their signals with the integrated hourly signals of one or more isotope ions. When compared with one-in-six day integrated elemental data as determined by X-ray fluorescence spectroscopy (XRF), the daily integrated ATOFMS signal for several metal ions revealed a semi-quantitative relationship between ATOFMS peak area and XRF concentrations, although in some cases comparison of these measurements were poor at low elemental concentrations/ion signals due to isobaric interferences. A method of estimating the impact of local point sources was developed using hourly integrated ATOFMS peak areas, and this method attributed as much as 85% of the concentration of individual metals observed at the study site to local point sources. Hourly surface wind data were used in conjunction with TRI facility emissions data to reveal likely point sources impacting metal concentrations at the study site and to illustrate the utility of using single-particle mass spectral data to characterize atmospheric metals and identify point sources.     

Uptake and translocation of metals in Spinacia oleracea L. grown on tannery sludge-amended and contaminated soils: effect on lipid peroxidation, morpho-anatomical changes and antioxidants

The plants of Spinacia oleracea L. grown on contaminated soil (CS) and different amendments of tannery sludge (TS) have shown high accumulation of metals in its edible part. The accumulation of toxic metal (Cr) in the leaves of the plants grown on CS was recorded as 40.67 microgg(-1)dw. However, the leaves of the plants grown on 100% TS have accumulated about two times (70.80 microgg(-1)dw) higher Cr than the 10% TS (31.21 microgg(-1)dw). Among growth parameters, the root length was more affected at 90 d than the shoot length, number of leaves and leaf area. The study of scanning electron micrographs showed 29.31% increase in stomatal length in the leaves of the plants grown on CS as compared to garden soil (GS), which served as control, however it decreased in the plants grown on higher amendments of TS. The decrease in MDA content at initial period of exposure and lower amendment was recorded in the leaves, whereas, significant increase (>10% TS onward) was observed with increase in tannery sludge ratio at 90 d as compared to GS. A coordinated increase in all the studied antioxidants (cysteine, non-protein thiol, ascorbic acid, carotenoid contents) was found up to 75 d of growth. At 90 d, most of the antioxidant decreased as compared to 75 d causing oxidative stress as evidenced by increased level of lipid peroxidation and decreased chlorophyll and protein contents. Maximum increase of 181.43% in MDA content and maximum decrease of 53.69% in total chlorophyll content was recorded in the leaves of the plants grown on 100% TS after 90 d of growth. The plants grown on CS have shown an increase in shoot length, number of leaves, leaf area, photosynthetic pigments and protein contents and in all the studied antioxidants. Thus, these plants are able to combat stress involving defense mechanism, resulting in healthy growth of the plants. The results are well coordinated as there is no change in the MDA content as compared to the plants grown on GS. In view of high Cr accumulation in edible part of S. oleracea grown on CS after irrigation with tap water, it is not advisable to use these plants for edible purposes. Summing up, it is recommended that the level of metals in the edible part should be checked instead of healthy growth as deciding parameter for consumption. It is demonstrated through this study that metal enriched plants have detoxification mechanism and grow well on organic matter enriched contaminated soil.     

Circulating microRNAs as biomarkers of environmental exposure to polycyclic aromatic hydrocarbons: potential and prospects

Environmental Science and Pollution Research - Exposure to polycyclic aromatic hydrocarbons (PAHs) produced from various pyrogenic and petrogenic sources in the environment has been linked...     

Moving beyond traditional macrofaunal community structure studies in the Indian Ocean continental shelf: a research synthesis based on research weaving

Environmental Science and Pollution Research - The Indian Ocean (IO) continental shelf characterized by unique oceanographic and meteorological features and extreme habitat is a biodiversity...     

Participatory development of incentives to coexist with jaguars and pumas

Reducing costs and increasing benefits for rural communities coexisting with large carnivores is necessary for conservation of jaguar (Panthera onca) and puma (Puma concolor). To design acceptable incentives, stakeholders must be involved in the process. We conducted an innovative, structured, group communication process based on a Delphi technique as a template for identifying potential incentives. Community workshops with 133 members of 7 communities and surveys with 25 multidisciplinary experts from government, nongovernmental organizations, and academia provided iterative data to design a plan of incentives through 4 rounds of discussion. The final product integrated 862 ideas into 6 types of incentives: organization of communities, mechanisms for improved dialogue, citizen technical assistance, green labeling for community products, payment for the ecosystem service of biodiversity, and an assessment of financial alternatives. We used quantitative and qualitative techniques to indicate support for decisions about the design of incentives, which reduced researcher subjectivity. The diverse incentives developed and the cooperation from multiple stakeholders resulted in an incentive plan that integrated issues of governance, equity, and social norms.     

Synthesis of BiVO4/TiO2 composites and evaluation of their photocatalytic activity under indoor illumination

BiVO₄/TiO₂ composites with different weight ratios have been prepared by coprecipitation-based reactions followed by either thermal or hydrothermal treatment with the aim of evaluating the TiO₂ photosensitization by BiVO₄. The obtained materials present in all cases the desired monoclinic phase of BiVO₄ and anatase phase of TiO₂. Visible light absorption increased with increasing amount of bismuth vanadate. XPS results reveal the surface enrichment of Ti with respect to the bulk composition in samples characterised by a higher content of BiVO₄. The photocatalytic activity of the prepared materials was tested for the degradation of isopropanol in the gas phase under indoor illumination conditions. Although none of the composites was able to improve the activity of TiO₂, the low BiVO₄ containing samples appear as more suitable for further synthesis tuning.