Impact of dust storm on phytoplankton bloom over the Arabian Sea: a case study during March 2012

Environmental Science and Pollution Research - Dust storms affect the primary productivity of the ocean by providing necessary micronutrients to the surface layer. One such dust storm during March...     

Coupling of solar-assisted advanced oxidative and biological treatment for degradation of agro-residue-based soda bleaching effluent

This study evaluates the effect of integrated solar-assisted advanced oxidation process (AOP) and biological treatment on the extent of degradation of effluents from chlorination (C) and first alkaline extraction (E₁) stages of soda pulp bleaching in agro-residue-based pulp and paper mill. Biodegradation of the effluents was attempted in suspended mode using activated sludge from the functional pulp and paper industry effluent treatment plant acclimatized to effluents in question. The photocatalytic treatment was employed using zinc oxide (ZnO) in slurry mode for decontamination of effluents in a batch manner and the degradation was evaluated in terms of reduction in chemical oxygen demand. The biological treatment (24?h) of C and E₁ effluent resulted in 30 and 57?% of degradation, respectively. Solar-induced AOP of C and E₁ effluents resulted in 53 and 43?% degradation under optimized conditions (2.5?g?L^?1 ZnO at pH?8.0) after 6?h of exposure. For C effluent, a short duration of solar/ZnO (1?h) prior to biological treatment reduced the time required at biological step from 24 to 12?h for almost same extent (92?%) of degradation. However, sequential biological treatment (24?h) followed by solar/ZnO (2?h) resulted in 85.5?% degradation. In contrast, in the case of E₁ effluent, sequential biological (24?h)?Csolar/ZnO (2?h) system effectively degrades effluent to 95.4?% as compared to 84.8?% degradation achieved in solar/ZnO (2?h)?Cbiological treatment (24?h) system. In the present study, the sequencing of photocatalysis with the biological treatment is observably efficient and technically viable process for the complete mineralization of the effluents.     

Characterization of atmospheric aerosols for organic tarry matter and combustible matter during crop residue burning and non-crop residue burning months in Northwestern region of India

Aerosol (total suspended particulate) samples collected at three diverse locations (urban-commercial, semi-urban and rural-agricultural) in Patiala, India were analyzed for loss on ignition (LOI) and organic tarry matter (OTM) content in ambient air during crop residue burning (CRB) episodes and non-crop residue burning (NCRB) months in 2006–2007. Results showed high levels of LOI and OTM during wheat and rice crop residue-burning periods at all the sites. Higher levels were obtained during rice crop residue-burning period as compared to the wheat residue-burning period. At semi-urban site, LOI varied between 53 ± 36 μg m^?3 and 257 ± 14 μg m^?3 constituting 38–78% (w/w) part of the aerosols whereas levels of OTM varied between 0.98 ± 0.11 μg m^?3 and 7.93 ± 2.76 μg m^?3 comprising 0.42–3.28% (w/w) fraction. At rural-agricultural area site, levels of LOI varied between 86 ± 40 μg m^?3 and 293 ± 70 μg m^?3 comprising 27–84% (w/w), whereas OTM levels varied between 1.31 ± 0.64 μg m^?3 and 10.09 ± 6.56 μg m^?3 constituting 0.83–2.42% (w/w) fraction of the aerosols. At urban-cum-commercial site, levels of LOI and OTM varied between 48 ± 23 μg m^?3 and 281 ± 152 μg m^?3 and 2.53 ± 1.23 μg m^?3 and 17.40 ± 8.50 μg m^?3, constituting 24–62% (w/w) part of the aerosols, respectively. Results also indicated that OTM and LOI were integral parts of aerosols and their concentrations were influenced by the crop residue burning practices with incorporated effect of vehicular activities in Patiala.     

Cyanobacterial Flora from Polluted Industrial Effluents

Effluents originating from pesticides, agro-chemicals, textile dyes and dyestuffs industries are always associated with high turbidity, colour, nutrient load, and heavy metals, toxic and persistent compounds. But even with such an anthropogenic nature, these effluents contain dynamic cyanobacterial communities. Documentation of cyanobacterial cultures along the water channels of effluents discharged by above mentioned industries along the west coast of India and their relationship with water quality is reported in this study. Intensity of pollution was evaluated by physico-chemical analysis of water. Higher load of solids, carbon and nutrients were found to be persistent throughout the analysis. Sediment and water samples were found to be colored in nature. Cyanobacterial community structure was found to be influenced by the anthropogenic pollution. 40 different cyanobacterial species were recorded from 14 genera of 5 families and an elevated occurrence of Phormidium, Oscillatoria and Chroococcus genera was observed in all the sampling sites.     

Cyanobacterial Flora from Polluted Marine Shores

Citation of cyanobacterial cultures from the shores of south west coast of Gujarat, India and their relationship with sea water quality, influenced by extensive pollutant runoff is reported in this study. Intensity of pollution was evaluated by physico-chemical analysis of water. Higher load of suspended solids (60–1000 mg l⁻¹) and nutrients (PO₄ ⁻P: 1.3–4 μmole l⁻¹ and NO₃ ⁻N: 12.5–17.8 μmole l⁻¹) were persistent throughout the analysis. Community structure is seen to be influenced by such persistent pollution. Twenty nine cyanobacterial species were isolated belonging to 9 genera of 4 families, with an elevated occurrence of Oscillatoria and Lyngbya species. No heterocystous cyanobacteria were isolated throughout the study.     

Synthesis of BiVO4/TiO2 composites and evaluation of their photocatalytic activity under indoor illumination

BiVO₄/TiO₂ composites with different weight ratios have been prepared by coprecipitation-based reactions followed by either thermal or hydrothermal treatment with the aim of evaluating the TiO₂ photosensitization by BiVO₄. The obtained materials present in all cases the desired monoclinic phase of BiVO₄ and anatase phase of TiO₂. Visible light absorption increased with increasing amount of bismuth vanadate. XPS results reveal the surface enrichment of Ti with respect to the bulk composition in samples characterised by a higher content of BiVO₄. The photocatalytic activity of the prepared materials was tested for the degradation of isopropanol in the gas phase under indoor illumination conditions. Although none of the composites was able to improve the activity of TiO₂, the low BiVO₄ containing samples appear as more suitable for further synthesis tuning.     

Radon diffusion and exhalation from mortar modified with fly ash: waste utilization and benefits in construction

Journal of Material Cycles and Waste Management - The utilization of fly ash in construction and cement industry increases from last few decades. But the question on utilization of fly ash for...     

PAHs in some brands of tea

Polycyclic aromatic hydrocarbons (PAHs) are a class of environmental pollutants generated from incomplete combustion of organic materials. PAHs in tea have been studied for five locally available brands. Six to seven PAHs from list of 16 priority pollutants (US EPA) were found to be present in samples of various brands of tea. Benzo[a]pyrene (2A: probable human carcinogen) was found in two samples, and naphthalene (2B: possible human carcinogen) was found in all the tea samples.     

A Wavelet-based Neural Network Model to Predict Ambient Air Pollutants’ Concentration

The present paper proposes a wavelet based recurrent neural network model to forecast one step ahead hourly, daily mean and daily maximum concentrations of ambient CO, NO₂, NO, O₃, SO₂ and PM_2.5 — the most prevalent air pollutants in urban atmosphere. The time series of each air pollutant has been decomposed into different time-scale components using maximum overlap wavelet transform (MODWT). These time-scale components were made to pass through Elman network. The number of nodes in the network was decided on the basis of the strength (power) of the corresponding input signals. The wavelet network model was then used to obtain one-step ahead forecasts for a period extending from January 2009 to June 2010. The model results for out of sample forecast are reasonably good in terms of model performance parameters such as mean absolute error (MAE), mean absolute percentage error (MAPE), root mean square error (RMSE), normalized mean absolute error (NMSE), index of agreement (IOA) and standard average error (SAE). The MAPE values for daily maximum concentrations of CO, NO₂, NO, O₃, SO₂ and PM2.5 were found to be 9.5%, 17.37%, 21.20%, 13.79%, 17.77% and 11.94%, respectively, at ITO, Delhi, India. Bearing in mind that the forecasts are for daily maximum concentrations tested over a long validation period, the forecast performance of the model may be considered as reasonably good. The model results demonstrate that a judicious selection of wavelet network design may be employed successfully for air quality forecasting.     

Case-control and cross-sectional methods for estimating crash modification factors: comparisons from roadway lighting and lane and shoulder width safety effect studies

Problem

While observational before-after studies are considered the industry standard for developing crash modification factors (CMFs), there are practical limitations that may preclude their use in highway safety analysis. There is a need to explore alternative methods for estimating CMFs.

Method

This paper employs case-control and cross-sectional analyses to estimate CMFs for fixed roadway lighting and the allocation of lane and shoulder widths.

Results

Based on the case-control method, the CMF for intersection lighting is 0.886, while the cross-sectional study indicates a CMF of 0.881. The CMFs developed for lane and shoulder widths are also similar when comparing the two methods.

Conclusions

This paper suggests that case-control and cross-sectional studies produce consistent results if care is taken in the study design and model development.

Impact on industry

Case-control and cross-sectional studies may provide a viable alternative to estimate CMFs when a before-after study is impractical due to data restrictions.