Experimental investigation of solar-powered desiccant cooling system by using composite desiccant “CaCl<Subscript>2</Subscript>/jute”

A solar-powered composite desiccant cooling system has been experimentally investigated. It consists of evacuated tube solar water heater, composite desiccant bed heat exchanger (CDBHE), direct evaporative cooling unit and cooling tower. The composite desiccant material has been synthesized by using iron mesh and jute layer impregnated with calcium chloride solution, and this composite desiccant is placed in shell- and tube-type heat exchanger to make CDBHE. In this desiccant cooling system, the evacuated tube solar water heater is used to produce required hot water for regeneration of composite desiccant material. A cooling tower is used to produce cooling water which is pumped into CDBHE during dehumidification process to remove heat of adsorption. Direct evaporative cooling unit is used to cool the outlet process air of CDBHE. It has been found that the average dehumidification rate increases by 54.1 % when using circulating cooling water. The COP_th of desiccant cooling system has been found to be 0.46 with a cooling capacity of 353.8 W.     

Landowner Motivations for Civic Engagement in Water Resource Protection

Scholars and water resource professionals recognize citizens must get involved in water resource issues to protect water resources. Yet questions persist on how to motivate community members to get and stay civically involved in nonpoint source pollution issues, given that problems are often ill‐defined. To be successful, interventions intended to engage individuals in collective action must be based on an understanding of the determinants of public‐sphere behavior. The purpose of this study is to explore the psycho‐social factors which influence landowner civic engagement in water resource protection. Data were collected using a self‐administered mail survey of landowners in the Cannon River Watershed and analyzed using structural equation modeling. Study findings suggest landowners are more likely to be civically engaged in water resource issues if they feel a personal obligation to take civic action and perceive they have the ability to protect water resources. Landowners who believe water resource protection is a local responsibility, perceive important others expect them to protect water resources, and believe they have the ability to protect water resources are more likely to feel a sense of obligation to take civic action. A combination of strategies including civic engagement programs addressing barriers to landowner engagement will be most effective for promoting civic engagement in water resource protection.     

Cleaning the river Damodar (India): impact of COVID-19 lockdown on water quality and future rejuvenation strategies

Globally, it is established that the partial lockdown system assists to improve the health of the total environment due to inadequate anthropogenic actions in different economic sectors. The ample research on fitness of environment has been proved that the strict imposition of lockdown was the blessings of environment. The river Damodar has historical significance and lifeline for huge population of Jharkhand and West Bengal state of India but in the recent years the water quality has been deteriorated due to untreated industrial effluents and urban sewage. The main objective of this study is to examine the water quality of river Damodar during and prelockdown phase for domestic use and restoration of river ecosystem. A total of eleven (11) effluent discharge sites were selected in prelockdown and during lockdown phase. A new approach of water quality assessment, i.e., water pollution index (WPI) has been applied in this study. WPI is weightage free, unbiased method to analysis of water quality. The result shows that the physical, chemical and heavy elements were found beyond the standard limit in prelockdown period. The cation and anion were arranged in an order of Na²⁺ ?>?K⁺ ?>?Ca²⁺ ?>?Mg²⁺ and Cl^??>?So₄^??>?No₃^??>?F^? in both the sessions. WPI of prelockdown showed that about 100% water samples are of highly polluted. WPI of lockdown period showed that around 90.90% samples improved to ‘good quality’ and 9.10% of samples are of ‘moderately polluted.’ Hypothesis testing by ‘t’ test proved that there was a significant difference (ρ?=?0.05%) in values of each parameter between two periods. Null hypothesis was rejected and indicated the improvement of river water quality statistically. Spatial mapping using Arc GIS 10.4 interpolation (IDW) helps to understand spatial intensity of pollution load in two periods. This research study should be helpful for further management and spatial diagnosis of water resource of river Damodar.

     

Global and regional potential of wastewater as a water,nutrient and energy source

There is a proactive interest in recovering water, nutrients and energy from waste streams with the increase in municipal wastewater volumes and innovations in resource recovery. Based on the synthesis of wastewater data, this study provides insights into the global and regional “potential” of wastewater as water, nutrient and energy sources while acknowledging the limitations of current resource recovery opportunities and promoting efforts to fast-track high-efficiency returns. The study estimates suggest that, currently, 380 billion m³ (m³ = 1,000 L) of wastewater are produced annually across the world which is a volume five-fold the volume of water passing through Niagara Falls annually. Wastewater production globally is expected to increase by 24% by 2030 and 51% by 2050 over the current level. Among major nutrients, 16.6 Tg (Tg = million metric ton) of nitrogen are embedded in wastewater produced worldwide annually; phosphorus stands at 3.0 Tg and potassium at 6.3 Tg. The full nutrient recovery from wastewater would offset 13.4% of the global demand for these nutrients in agriculture. Beyond nutrient recovery and economic gains, there are critical environmental benefits, such as minimizing eutrophication. At the energy front, the energy embedded in wastewater would be enough to provide electricity to 158 million households. These estimates and projections are based on the maximum theoretical amounts of water, nutrients and energy that exist in the reported municipal wastewater produced worldwide annually. Supporting resource recovery from wastewater will need a step-wise approach to address a range of constraints to deliver a high rate of return in direct support of Sustainable Development Goals (SDG) 6, 7 and 12, but also other Goals, including adaptation to climate change and efforts in advancing “net-zero” energy processes towards a green economy.     

Pesticide residues in Indian raw honeys,an indicator of environmental pollution

Honey has multifaceted beneficial properties, but polluted environment and unapproved apicultural practices have led to its contamination. In this study, QuEChERS method followed by chromatographic analysis by GC-μECD/FTD and GC-MS was validated and used for determination of 24 pesticides in 100 raw honey samples from various floral origins of Northern India. Matrix-matched calibrations showed that the method was selective and linear (r²?>?0.99) with detection limit <?9.1 ng g^?1 for all the studied pesticides except for monocrotophos (21.3 ng g^?1). The average recoveries at different fortification levels ranged from 86.0 to 107.7% with relative standard deviation <?20%. Pesticide residues were detected in 19.0% samples, and most prevalent compounds detected were dichlorvos in 6.0% samples followed by monocrotophos (5.0%), profenofos (5.0%), permethrin (4.0%), ethion (3.0%), and lindane (3.0%) with concentrations ranging from 58.8 to 225.5, from 96.0 to 430.1, from 14.6 to 43.2, from 27.8 to 39.6, from 25.6 to 28.0, and from 19.6 to 99.2 ng g^?1, respectively. Honey samples originating from cotton, sunflower, and mustard crops (33.3%) that tested positive for pesticide residues were found to be significantly higher (p?<?0.05) than the honey originating from natural and fruity vegetation (13.5%). Therefore, considering the contamination of environmental compartments due to extensive application of pesticides in the study area and their potential for subsequent transfer to honey by the expeditious bees, the results of present study proclaim that honey may be used as an indicator of environmental pollution. Further, estimated daily intakes of all contaminants were found to be at levels well below their acceptable daily intakes suggesting that consumption of honeys at current levels does not pose deleterious effects on human health. However, precautionary measures should always be taken considering the customary honey feeding in infants and cumulative effect of these chemicals in the foreseeable future.     

Biogeocomposite material and its heavy metal adsorption potential from aqueous solutions

Biosorption process is emerging as a potential alternative for the heavy metal removal from aqueous solutions. A packed bed column containing biomaterials like papaya leaf powder and paddy straw powder was used for copper removal from aqueous solutions. The breakthrough curve was having an S-shaped profile and the breakthrough time became less with increase in initial concentration. Percentage removal of copper was around 85% and 77% for papaya leaf powder and paddy straw powder, respectively for a contact time of 120 minutes and initial concentration of 10 mg/L. A biogeocomposite material was developed to test the enhancement in adsorption using layers of non-woven geotextile material and a significant increase in adsorption was obtained. With the addition of geotextile material in between papaya powder layer and paddy straw powder, there was an average increase of 12.66% and 11.98%, respectively for the removal. A biocomposite material was developed with a mixture of the two biosorbents and the adsorption value of the biocomposite material was in between the two biosorbents. The applicability of Yoon Nelson model and Adam Bohart model were also evaluated and the most suitable model came out to be Yoon and Nelson model.     

A review for chromium removal by carbon nanotubes

Water pollution is still a serious problem for the entire world. Adsorption technology is a promising process which is based on the fabrication of novel, cheap, non-dangerous and highly sorptive materials for application in wastewater purification processes. Nanomaterials are functional groups which find use in many important fields such as medicine, food processing and agriculture. This review collects information from published works about the use of carbon nanotubes as efficient and promising adsorbents in chromium removal from (real or synthesised) wastewater. For this purpose, isotherm (Langmuir, Freundlich, etc.), kinetic (pseudo-first-, second-order, etc.), thermodynamic (free-energy Gibbs, enthalpy, entropy) and desorption–regeneration studies were discussed in detail. Moreover, significant factors such as pH, agitation time, temperature, adsorbent dosage and initial dye concentration are also reported extensively. The maximum monolayer adsorption capacities of Cr(III) and Cr(VI) ions were 0.39–238.09 and 1.26–370.3?mg/g, respectively. The absolute values of ΔG⁰ and ΔH⁰ ranged 0.237–48.62 and 0.16–58.43?kJ/mol, respectively.     

Toxicology of arsenic in fish and aquatic systems

Arsenic (As) is found in waters such as seawater, warm springs, groundwater, rivers, and lakes. In aquatic environments, As occurs as a mixture of arsenate and arsenite, with arsenate usually predominating. The unrestricted application of As pesticides, industrial activities, and mining operations has led to the global occurrence of soluble As above permissible levels of 0.010 mg/L. Continuous exposure of freshwater organisms including fish to low concentrations of As results in bioaccumulation, notably in liver and kidney. As a consequence As induces hyperglycemia, depletion of enzymatic activities, various acute and chronic toxicity, and immune system dysfunction. Here we review arsenic chemistry, the occurrence of arsenic in aquatic system, the transformation and metabolism of arsenic; arsenic bioaccumulation and bioconcentration; behavioral changes; and acute and other effects such as biochemical, immunotoxic, and cytogenotoxic effects on fish.     

Ionic and heavy metal composition of respirable particulate in Madurai, India

Airborne particulate matter (PM₁₀) was collected for a period of 1 year at six locations in Madurai city, India. The chemical analyses on PM₁₀ samples were carried out for the estimation of heavy metals and ions using atomic absorption spectroscopy and ion chromatography respectively. The average PM₁₀ concentrations varied from 97.2 to 152.5 μg/m³, which were found to be below the Indian air quality standards. While industrial areas had the highest concentrations of heavy metals such as Fe, Zn and Cr and also the $\text{SO}_{4}^{2-}$ ions, traffic areas with relatively higher traffic densities in the city endured highest concentrations of Cd and the $\text{NO}_{3}^{-}$ ion. As gaseous pollutants serve as precursors of ionic particles in the atmospheric environment, gaseous pollution control is necessitated along with particulate with special reference to heavy metal and ion pollution abatement for the sustainable development of Madurai city.     

Concentrations, sources, and exposure profiles of polycyclic aromatic hydrocarbons (PAHs) in particulate matter (PM10) in the north central part of India

Airborne particulates (PM₁₀) from four different areas within Agra city (a semi-arid region) were collected using respirable dust samplers during the winter season (Nov. 2005–Feb 2006) and were then extracted with methylene chloride using an automated Soxhlet Extraction System (Soxtherm^®). The extracts were analyzed for 17 target polycyclic aromatic hydrocarbons (PAHs) and the heterocycle carbazole. The average concentration of total PAH (TPAH) ranged from 8.04 to 97.93 ng m^???3. The industrial site had the highest TPAH concentration followed by the residential, roadside, and agricultural sites. Indeno(1,2,3-cd)pyrene, benzo(g,h,i)perylene, and benzo(b)fluoranthene were the predominant compounds found in the samples collected from all of the sites. The average B(a)P-equivalent exposure, calculated by using toxic equivalent factors derived from literature and the USEPA, was approximately 7.6 ng m^???3. Source identification using factor analysis identified prominent three, four, four, and four probable factors at industrial, residential, roadside, and agricultural sites, respectively.