Determination of effects of turbulence flow in a cathode environment on electricity generation using a tidal mud-based cylindrical-type sediment microbial fuel cell

We examined the possibility of harvesting electricity from the surface of a tidal mud flat using a cylindrical-type sediment microbial fuel cell (SMFC), a marine mud battery (MMB), which can be applied in a sea environment where the ebb and flow occur due to tidal difference. In addition, we indirectly investigated the influence of ebb and flow in a lab, using aeration, argon gassing, and by agitating the cathodic solution. The MMBs consisted of cylindrical acrylic compartments containing a nylon membrane, an anode, and a cathode in a single body. The MMBs were stuck vertically into an artificial tidal mud flat such that the anode electrode was in direct contact with the tidal mud surface. As a result, the maximum current and power density generated were 35 mA/m² and 9 mW/m², respectively, thus verifying that it is possible to harvest electricity from the surface of a tidal mud flat using an MMB without burying the anode electrode in the tidal mud. Furthermore, the results of tests using an artificial turbulence flow showed the flow induced by the tidal ebb and flow could allow the performance of MMBs to be enhanced.     

When does benevolent leadership lead to creativity? The moderating role of creative role identity and job autonomy

The present study identified creative role identity and job autonomy as two moderators that influence the relationship between benevolent leadership, a leadership style that prevails in paternalistic contexts, and creativity. Using 167 dyads of supervisor and subordinate as a sample, we found that both creative role identity and job autonomy have significant moderating effects: When each moderator is high, the positive relationship between benevolent leadership and creativity is stronger; when each moderator is low, this relationship is weaker. Our results suggest that the effect of benevolent leadership upon creativity is dependent on the coexistence of important individual and contextual factors. Copyright © 2009 John Wiley & Sons, Ltd.     

Assessing the impact of urbanization on regional net primary productivity in Jiangyin County, China

Urbanization is one of the most important aspects of global change. The process of urbanization has a significant impact on the terrestrial ecosystem carbon cycle. The Yangtze Delta region has one of the highest rates of urbanization in China. In this study, carried out in Jiangyin County as a representative region within the Yangtze Delta, land use and land cover changes were estimated using Landsat TM and ETM+ imagery. With these satellite data and the BEPS process model (Boreal Ecosystem Productivity Simulator), the impacts of urbanization on regional net primary productivity (NPP) and annual net primary production were assessed for 1991 and 2002. Landsat-based land cover maps in 1991 and 2002 showed that urban development encroached large areas of cropland and forest. Expansion of residential areas and reduction of vegetated areas were the major forms of land transformation in Jiangyin County during this period. Mean NPP of the total area decreased from 818 to 699 gCm(-2)yr(-1) during the period of 1991 to 2002. NPP of cropland was only reduced by 2.7% while forest NPP was reduced by 9.3%. Regional annual primary production decreased from 808 GgC in 1991 to 691 GgC in 2002, a reduction of 14.5%. Land cover changes reduced regional NPP directly, and the increasing intensity and frequency of human-induced disturbance in the urbanized areas could be the main reason for the decrease in forest NPP.     

A new method of simultaneous determination of atmospheric amines in gaseous and particulate phases by gas chromatography-mass spectrometry

As more attention is being paid to the characteristics of atmospheric amines, there is also an increasing demand for reliable detection technologies. Herein, a method was developed for simultaneous detection of atmospheric amines in both gaseous and particulate phases using gas chromatography-mass spectrometry (GC-MS). The amine samples were collected with and without phosphoric acid filters, followed by derivatization with benzenesulfonyl chloride under alkaline condition prior to GC-MS analysis. Furthermore, the method was optimized and validated for determining 14 standard amines. The detection limits ranged from 0.0408-0.421 µg/mL (for gaseous samples) and 0.163-1.69 µg/mL (for particulate samples), respectively. The obtained recoveries ranged from 68.8%-180% and the relative standard deviation was less than 30%, indicating high precision and good reliability of the method. Seven amines were simultaneously detected in gaseous and particulate samples in an industrial park using the developed method successfully. Methylamine, dimethylamine and diethylamine together accounted for 76.7% and 75.6% of particulate and gaseous samples, respectively. By comparing the measured and predicted values of gas-particle partition fractions, it was found that absorption process of aqueous phase played a more important role in the gas-partition of amines than physical adsorption. Moreover, the reaction between unprotonated amines and acid (aq.) in water phase likely promoted water absorption. Higher measured partition fraction of dibutylamine was likely due to the reaction with gaseous HCl. The developed method would help provide a deeper understanding of gas-particle partitioning as well as atmospheric evolution of amines.     

人工神经网络在强化一级处理系统过程模拟与优化中的应用

针对化学强化一级处理系统(CEPT)处理废水时影响因素多,难以进行适当的控制和处理效果的预测等问题,建立起基于BP人工神经网络的CEPT法处理猪场稳定塘废水预测模型,并应用该模型对烧杯试验进行了模拟.结果表明,预测值和实测值吻合较好,模型对COD、总磷、浊度去除率预测的平均相对误差分别为7.5%、4.8%和4.9%.通过对pH值和絮凝剂投药量等可控参数进行优化计算,得到CEPT系统的最佳操作条件和最合理操作条件.该模型的建立为CEPT法处理废水工艺系统实现自动化控制提供了一条简便实用的途径.     

高效藻类塘氮磷去除机理的研究进展

首先介绍了高效藻类塘的发展历史和特点，其次简述了高效藻类塘的生物特性和物理化学变化规律，并重点论述了高效藻类塘的氮磷去除机理及其影响因素，最后对高效藻类塘在控制非点源污染中的应用前景进行展望。     

Natural attenuation of trichloroethene and its degradation products at a lake-shore site

Subsurface contamination by trichloroethene (TCE) was detected at a Michigan National Priorities List (NPL) site in 1982. The TCE plume resulted from the disposal of spent solvent and other chemicals at an industrial facility located in the eastern shore of Lake Michigan. TCE degradation products of three dichloroethene (DCE) isomers, vinyl chloride (VC) and ethene were present. The plume was depleted of oxygen and methanogenic at certain depths. Transects of the plume were sampled by slotted auger borings the year after the TCE plume was first discovered. Water samples were also taken from lake sediments to a depth of 12 m about 100 m offshore. Later samples were taken along the shoreline of the lake with a hand-driven probe. Later in 1998 water was taken from sediments about 3-m from the shoreline. The average concentration of each chemical and net apparent base coefficient between appropriate pairs of transects between the lower site and lakeshore were calculated. Loss rates were then calculated from an analytical solution of the two-dimensional advective-dispersive-reactive transport equation. Net apparent rate coefficients and a set of coupled reaction rate equations were used to extract the apparent loss coefficients. This study showed the field evidence for natural attenuation of TCE.     

Total,dissolved, and bioavailable metals at Lake Texoma marinas

Dissolved metals in water and total metals in sediments were measured at marina areas in Lake Texoma during June 1999 to October 2001, and October 2001, respectively. The metals most often found in the highest concentrations in marina water were Na and Ca, followed by Mg and K. Elevated Cu levels detected in lake water appeared to be associated with Cu based anti-fouling paint used on boats. Metal concentrations in sediment were much higher than in water. The relative order of the concentration in sediment was Ca > Al > Fe > K > Mg > Na. Elevated Cu level at specific locations appeared to be associated with local anthropogenic sources of boat repair activities. There were positive relationships between several metal elements in water and sediment. Metals in 16 sediments from lake marinas were extracted with a weak electrolyte solution [0.1 M Ca(NO3)2] to predict the bioavailability of metals. Among the five heavy metals studied (As, Cd, Cr, Cu and Zn), Cu was the most bioavailable in Lake Texoma marinas.     

Escherichia coli and total coliforms in water and sediments at lake marinas

Escherichia coli, a fecal coliform, and total coliforms were monitored between September 1999 and October 2001 in five marinas at Lake Texoma, located on the Oklahoma and Texas border. The general trend was that densities of E. coli were lower in the summer season due to the lower loading of fecal material into Lake Texoma and the ecological conditions of the lake, such as more vigorous grazing by protozoa and less viability of E. coli at an elevated temperature. The densities of total coliforms greatly increased in the summer. E. coli levels increased with depth, and the bottom water samples had higher densities of E. coli mainly due to their association with particles. There was a direct relationship between amount of gasoline sold, which was related to recreational boating activity, and the resuspension of E. coli. This indicated that recreational boating activity in lake marinas may have resuspended bottom sediments with bound E. coli, and the presence of E. coli in marinas was not an indication of recent fecal contamination. E. coli were detected in the largest densities at the boat dock points, followed by the gasoline filling station, and marina entrance. In addition, enumeration of bacteria in bottom sediment showed that the densities of E. coli and total coliforms in sediment were much higher compared to those in lake water.     

BOD生物传感器的研制与应用

介绍了ＢＯＤ生物传感器的原理、研制过程以及实际测定。该仪器测定ＢＯＤ的周期为３０ｍｉｎ，有较高的精密度和准确度，与稀释法有良好的相关性，可以及时信息反馈，特别适用于污水处理过程中的控制分析以及ＢＯＤ的快速测定。