EDDS and EDTA-enhanced zinc accumulation by Solanum nigrum inoculated with arbuscular mycorrhizal fungi grown in contaminated soil

The effect of two different chelating agents [EDTA and EDDS (S,S-ethylenediaminedissucinic acid)] on Zn tissue accumulation in Solanum nigrum L. grown in a naturally contaminated soil was assessed. Under those conditions, the response of the plant to the inoculation with two different isolates of arbuscular mycorrhizal fungi (AMF)--Glomus claroideum and Glomus intraradices--was also studied. Plants grown in the local contaminated soil (Zn levels of 433mg kg(-1)) accumulated up to 1191mg kg(-1) of Zn in the roots, 3747mg kg(-1) in the stems and 3409mg kg(-1) in the leaves. S. nigrum plants grown in the same soil spiked with extra Zn (Zn levels of 964mg kg(-1)) accumulated up to 4735, 8267 and 7948mg Zn kg(-1) in the leaves, stems and roots, respectively. The addition of EDTA promoted an increase in the concentration of Zn accumulated by S. nigrum of up to 231% in the leaves, 93% in the stems and 81% in the roots, while EDDS application enhanced the accumulation in leaves, stems and roots up to 140, 124 and 104%, respectively. In the stems, the presence of Zn was predominantly detected in the cortex collenchyma cells, the starch sheath and the internal phloem and xylem parenchyma, and the addition of chelating agents did not seem to have an effect on the localisation of accumulation sites. The devise of a chelate-enhanced phytoextraction strategy, using chelating agents and AMF, is discussed.     

Effect of biosolid incorporation on arsenic distribution in Mollisol soils in central Chile

The effect of biosolid incorporation on arsenic distribution in Mollisol soils in central Chile was studied. Two soils were sequentially extracted for arsenic with a five-step method that accounts for the following arsenic forms: non-specifically adsorbed (F1), specifically adsorbed (F2), amorphous and poorly crystallized Fe and Al oxides (F3), well-crystallized Fe and Al oxides (F4) and residual (F5). The arsenic residual fraction was predominant in Pintué soil, whereas in Graneros soil, arsenic was mostly associated to amorphous Fe and Al oxides. Graneros soil exhibited a higher As(V) adsorbing capacity than Pintué soil, which relates to the higher clay and iron and aluminum oxides contents, confirming that these components participation is essential for the adsorption of this metalloid. Biosolid application at a rate of 100Mg ha(-1) caused an increase in arsenic bound to amorphous Fe and Al oxides and in the residual fraction, in Pintué soil. When Pintué soil was spiked with arsenic, aged for two months, and treated with biosolid (100Mg ha(-1)), the content of arsenic in the most labile fractions decreased, thus showing a favorable effect in its application to soils with few specific sites for arsenic adsorption. Arsenic speciation was carried out in the first two fractions of the sequential extraction procedure. As(V) was the main form in both fractions. Biosolid incorporation at a rate of 100Mg ha(-1) caused a significant increase in organic arsenic forms.     

Metallothionein levels in Algerian mice (Mus spretus) exposed to elemental pollution: an ecophysiological approach

The potential use of metallothioneins (MTs) as biomarkers of trace metal contamination was evaluated for the first time in the Algerian mouse (Mus spretus). Mice were collected seasonally in an abandoned mining area (Aljustrel) and in a reference area, both located in southern Portugal. MT levels were quantified in liver and kidney by differential pulse polarography and hepatic elemental concentrations (Mn, Fe, Cu, Zn, Se) were determined by particle-induced X-ray emission. Hepatic iron and selenium concentrations were elevated in mice from Aljustrel mine when compared to reference animals. MTs levels were averagely higher in mice from Aljustrel than those originated from the reference area. A season-dependent significant effect was found on the hepatic and renal MT concentrations, characterized by higher levels in winter and lower in autumn. In contaminated mice positive relationship between liver elemental contents (Cu in autumn and Fe in winter) and MTs were found. The seasonal variation of MT suggests that probably physiological and environmental factors could influence hepatic and renal MT induction. Results seem to imply that some environmental disturbance occur in the vicinity of the Aljustrel mine. Therefore, for the management purposes MT levels should be followed in liver of M. spretus, especially in winter. Furthermore, other physiological factors that could influence MT expression and turnover in Algerian mouse should also be monitored.     

Effect of sewage sludges contaminated with polybrominated diphenylethers on agricultural soils

The fate of polybrominated diphenyl ethers (PBDEs) in sewage sludge after agricultural application was analysed. This study was based on the analysis of sewage sludge and sludge amended soil samples collected during 2005. PBDE concentrations in sewage sludge ranged from 197 to 1185ng/g dry weight (dw), being deca-BDE-209 the predominant congener. PBDE levels in soils ranged between 21 and 690ng/g dw, being BDE-209 also the predominant congener in all soil samples. Sewage-sludge amendment at the research stations increased concentrations of all BDE congeners 1.2- to 45-fold, with the highest increases for BDE-209. Results obtained evidenced the cumulative effect of the sludge application rates. Moreover, high levels found at soils four years after the last sludge application indicate persistence of PBDEs in soils, including deca-BDE-209.     

Kinetic degradation processes of butyl- and phenyltins in soils

The degradation of organotin compounds (OTC) in agricultural and forest soils is studied in sandy soil samples. Individual experiments involving the three butyl- and the three phenyltins were carried out during 90 d in controlled conditions (darkness, 28 degrees C, aerobic conditions, 13% moisture) and with spiking concentration representative of environmental levels (20-50 micrg(Sn) kg(-1)). After the validation of first-order degradation kinetic model, mechanisms involved throughout the study were considered. Degradation pathways are proposed for butyl- and phenyltins and discussed according to literature data. The degradation of mono- (MBT, MPhT), di-organotins (DBT, DPhT) and TBT is clearly identified as a single successive loss of an organic group whereas TPhT is directly degraded to MPhT. The half-life times were dependent on their substitution degree, ranging from 24 (TPhT) to 220 (MBT) d. The less substituted the OTC is, the more persistent it is. In the range 4.3-5.7, pH does not seem to influence OTC degradation under the present operating conditions. Finally this study shows the significant persistence in soil samples in our experimental conditions for most of studied organotins and highlights the potential impact on soil quality.     

Efficient removal of triphenylmethane dyes from aqueous medium by in situ electrogenerated Fenton's reagent at carbon-felt cathode

Fenton's reagent (Fe2+ +H2O2) has been electrogenerated in situ in an undivided electrolytic cell from the effective reduction of Fe3+ and O2 at carbon-felt cathode for the treatment of aqueous solutions of four triphenylmethane dyes (TPMs), namely malachite green (MG), crystal violet (CV), methyl green (MeG) and fast green FCF (FCF), at pH 3.0 and room temperature. MG has been used as a model among them to study the influence of some experimental parameters on the decay kinetics, COD removal and current efficiency. The results in such electro-Fenton system are explained in terms of the many parasitic reactions involving .OH. Higher efficiency values are obtained with rising organic content and decreasing applied current. The first stage of the mineralization process, involving aromatic by-products, leads to fast decoloration as well as quick initial COD removal that fit well to a pseudo-first-order kinetics. At prolonged electrolysis time, the mineralization rate and efficiency decrease due to the formation of hardly oxidizable compounds and the enhancement of wasting reactions. Solutions of all four TPMs are quickly degraded following a pseudo-first-order decay kinetics. The absolute rate constant (kTPM) for their reaction with .OH increases in the order MeG相似文献   

Synthesis of zirconia-immobilized copper chelates for catalytic decomposition of hydrogen peroxide and the oxidation of polycyclic aromatic hydrocarbons

Chelating sorbents with diethylenetriaminepenta(methylene-phosphonic acid) (DTPMPA) and ethylenediaminetetraacetic acid ligands immobilized on zirconia matrix were prepared and subsequently saturated with Cu(II). All the Cu chelates catalyzed decomposition of H(2)O(2) yielding highly reactive hydroxyl radicals. All of them were also able to catalyze degradation of polycyclic aromatic hydrocarbons (anthracene, benzo[a]pyrene and benzo[b]fluoranthene). The most effective DTPMPA-based catalysts G-32 and G-35 (10 mg ml(-1) with 100 mmol H(2)O(2)) caused almost complete decomposition of 15 ppm anthracene and benzo[a]pyrene during a five day catalytic cycle at 30 degrees C. Anthracene-1,4-dione was the main product of anthracene oxidation by all catalysts. The catalysts were active in several cycles without regeneration.     

Influence of redox potential (Eh) on the availability of arsenic species in soils and soils amended with biosolid

A study was done on the influence of redox potential on the mobility and availability of the various arsenic chemical forms in a Mollisol soil from central Chile amended with biosolid. Arsenic availability was strongly dependent on the applied redox potential. As expected, under reducing conditions (-200 mV vs Hg/Hg(2)Cl(2)) arsenic availability increased significantly, and arsenic was found mainly as arsenite. On the contrary under oxidizing conditions (200 mV vs Hg/Hg(2)Cl(2)) arsenic solubility decreased markedly and was governed by the presence of arsenate. The greatest concentration of organic arsenic species was found under reducing conditions, which would indicate that methylated species may participate in the transformation of arsenate to arsenite. In biosolid-amended soils the concentrations of methylated species increased as a function of time under reducing conditions, which can be attributed to the greater microbial activity resulting from the organic matter supply from the biosolid to soil. In all the systems, a high concentration of As(V) was found under reducing conditions, indicating that the chemical kinetics for the conversion of arsenate to arsenite is slow. Along time, the content of As(V) increased in the control soils, which may be attributed to the possible dissolution of iron oxides and hydroxides under reducing conditions.     

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm(3)s(-1) standard temperature and pressure conditions.     

Contamination by organochlorine compounds in the edible tissue of four sturgeon species from the Caspian Sea (Iran)

This study focused on accumulation of organochlorine compounds (OCs), including dichloro-diphenyl-trichloroethanes (DDTs), hexachlorobenzene (HCB), hexachlorocyclohexanes (HCHs), and polychlorinated biphenyls (PCBs) accumulation in the muscle of four sturgeon (Persian sturgeon, Acipenser persicus; Stellate sturgeon, Acipenser stellatus; Ship sturgeon, Acipenser nudiventris and Beluga sturgeon, Huso huso) from the southern Caspian Sea. The DDT group was prominent in all of the sturgeon muscle tested constituting almost half or more of the total organochlorine content. Contaminant concentration generally followed this order: DDTs>PCBs>HCHs>HCB. The OCs concentrations in Beluga sturgeon (H. huso) were the highest and over four times higher than in the next highest species (A. nudiventris). From an ecotoxicological point of view, the concentrations of OCs in experimental fishes do not reflect a comparatively clean and pollution-free environment; however, results from this study shown that the inflow of organic pollutants into the Caspian Sea has been reduced when compared with prior studies. Levels of measured OCs in sturgeon were relatively low, but the level of some OCs in some of the specimens tested exceeded the guidelines for food; therefore, the maximum allowable daily consumption rate for sturgeon from this watershed may be limited by DDTs and PCBs content for high risk populations.