House sparrows selectively eject parasitic conspecific eggs and incur very low rejection costs

Most host species of obligate interspecific brood parasites are under strong selection because such parasitism, e.g., that involving evictor nestmates, is highly costly. Egg rejection is one of the most efficient host defences against avian brood parasites. Many hosts have thus evolved egg-recognition ability and rejection behaviour. However, this defensive mechanism has not evolved in most species where only intraspecific brood parasitism occurs, probably because (1) the eggs of conspecific females are very similar in appearance, making egg rejection less likely to emerge, and (2) such parasitism is frequently less costly than interspecific parasitism. Using a captive population of house sparrows (Passer domesticus) with a low breeding density, we here provide new evidence showing that this species actually has a fine capacity to discriminate conspecific eggs and to eject them (44.2% of foreign eggs ejected) while incurring very low rejection costs (4.2% of own eggs ejected). This result contradicts those previously found in high-density house sparrow populations in which very high rejection costs and very high clutch desertion rates were reported, probably as a consequence of intraspecific competition and infanticide provoked by the high breeding density. The house sparrow has only rarely been reported as the host of an interspecific brood parasite, which implies that it is a newly described example of an altricial species in which egg ejection has evolved and is maintained in response to intraspecific brood parasitism.     

A spatially explicit estimate of avoided forest loss

With the potential expansion of forest conservation programs spurred by climate-change agreements, there is a need to measure the extent to which such programs achieve their intended results. Conventional methods for evaluating conservation impact tend to be biased because they do not compare like areas or account for spatial relations. We assessed the effect of a conservation initiative that combined designation of protected areas with payments for environmental services to conserve over wintering habitat for the monarch butterfly (Danaus plexippus) in Mexico. To do so, we used a spatial-matching estimator that matches covariates among polygons and their neighbors. We measured avoided forest loss (avoided disturbance and deforestation) by comparing forest cover on protected and unprotected lands that were similar in terms of accessibility, governance, and forest type. Whereas conventional estimates of avoided forest loss suggest that conservation initiatives did not protect forest cover, we found evidence that the conservation measures are preserving forest cover. We found that the conservation measures protected between 200 ha and 710 ha (3-16%) of forest that is high-quality habitat for monarch butterflies, but had a smaller effect on total forest cover, preserving between 0 ha and 200 ha (0-2.5%) of forest with canopy cover >70%. We suggest that future estimates of avoided forest loss be analyzed spatially to account for how forest loss occurs across the landscape. Given the forthcoming demand from donors and carbon financiers for estimates of avoided forest loss, we anticipate our methods and results will contribute to future studies that estimate the outcome of conservation efforts.     

Voltammetric analysis of metallothioneins and copper (II) in fish for water biomonitoring studies

An major research area in environmental chemistry is the development of methods for the analysis of biomarkers. Metallothioneins are used as biomarkers in studies of heavy metals exposure in water, because metallothioneins are synthesized and accumulated when organisms are exposed to toxic concentrations of pollutants. In this work, simple and sensitive voltammetric methods were developed for metallothionein and copper (II) determinations in fish liver Lepomis gibbosus. Both analytical methodologies were optimized and applied to samples extracted from individuals previously submitted to sub-lethal toxicological trials with copper sulphate (CuSO₄) and cadmium chloride (CdCl₂). The obtained results showed that both methods are very precise, sensitive, and involve simple sample preparation processes. Moreover, metallothioneins showed better correlation with the toxic exposure than Cu²⁺. To the best of our knowledge, this is the first time that hepatic metallothioneins and Cu²⁺ contents are voltammetrically determined in order to be compared in their function as heavy metal biological indicators.     

Mass balance in the monitoring of pollutants in tidal rivers of the Guanabara Bay, Rio de Janeiro, Brazil

This study addressed the identification and monitoring of pollution sources of terrestrial origin in rivers (domestic sewage and industrial effluents) and critical fluvial segments in highly polluted environments under tidal influence (mixing marine and continental sources) from Guanabara Bay Basin, Rio de Janeiro, Brazil. The mass balance of contaminants was determined in conditions of continuous flow (low tide) during dry season (lower dilution capability). The results allowed the evaluation of the potential of contaminant mass generation by the different river segments and the estimation of their natural and anthropogenic components. The water quality of Igua?ú and Sarapuí Rivers were evaluated for metals and biochemical oxygen demand. The method gave an excellent response, including the possibility of sources identification and contaminated river segments ranking. The approach also offers fast execution and data interpretation, being highly efficient.     

Two leaks detection in viscoelastic pipeline systems by means of transient

This paper presents a technique for detecting and locating leaks in a single viscoelastic pipe, by means of transient analysis. The system studied is a reservoir-pipe-valve structure. The viscoelastic behavior of the pipe wall material is modeled by a generalized KelvinVoigt model. To determine the leak location, the mathematical formulation has been solved by the method of characteristics. The approach by the method of characteristics is often chosen because it is based on the concept of acoustic wave propagation which is the main mechanism of all transient events considered. The presence of the two leaks in a pipe partially reflects pressure waves initiated by the sudden closure of a downstream shut-off valve. These waves affect the shape and the amplitude of the time-history-pressure. The computed results describe the influence of the presence of two leaks on pressure time-history and the effect of leaks locations and sizes on the pressure signal behavior. The effect of the pipe wall viscoelasticity on the two leaks detection and sizing is also discussed. The leaks discharges are determined by resolving two independent equations derived from literatures and based on transient analysis. The friction and leaks depths effects on two leaks locations and sizing are involved.     

MIE determination and thermal degradation study of PA12 polymer powder used for laser sintering

Pulverized materials such as metallic or polymer powders play a considerable role in many industrial processes. Their use requires the introduction of preventive safeguards to control the plant's safety.PA12 polymer powder processing by laser sintering is characteristic of this tendency. The present work concerns PA12 powder (bimodal particle size distribution: 10 μm and 55 μm) and relates to explosion sensitivity and the thermal degradation of this powder, which can occur during laser sintering. Minimum Ignition Energy is determined using a modified Hartmann tube combined with the Langlie method developed in the PRISME Laboratory. This study shows the influence of parameters such as distance between the electrodes, powder concentration and arc power on MIE values. Theses parameters vary in the range of 3–6 A for the current intensity of the spark and the electrode gap in the range of 2.5–4 mm. The MIE is obtained for a spark gap of 3 mm and current intensity of the 4 A spark in our device. It shows that the MIE is less than 40 mJ for concentrations approaching 1000 g/m³. At lower concentrations (under 150 g/m³) the MIE increases but discrepancies in measurements appear, probably because of the static electricity that creates strong irregularities in dust dispersion. The second part of this study concerns the thermal degradation of the PA12 which is performed by thermogravimetric experiments coupled with mass spectrometric (MS) analysis for gas investigation. The mass loss measurement combined with the gas analysis allows the principal stages of degradation to be determined so as to calculate the kinetics parameter PA12. Experiments have been performed for different heating rates between 1 and 30 K min^?1 and the reproducibility of experiments has been verified. The activation energy is determined using two methods: Freidman and KAS. For a reaction rate of between 0.2 and 0.6, the activation energy is nearly constant. The KAS method gives a value of E_a = 250 kJ mol^?1 and the Friedman method gives E_a = 300 kJ mol^?1. The gas analysis by MS shows that oxidation begins at over 350 °C and finishes at under 650 °C with the formation of CO₂ and H₂O. Other major peaks with an m/z ratio of 29, 28 and 30 are noticed in this range of temperature. They show the presence of intermediate species such as C₂H₆, NO or CH₂O. The presence of HCN is also detected (m/z ratio of 27).     

Repetitive Strain in Nonrepetitive Work: A Case Study

In a Québec factory, a woman in a nontraditional job suffered from epicondylitis whereas her male coworkers were unaffected. A study was undertaken in order to enumerate the operations at risk for epicondylitis. Workers were interviewed in order to identify difficult operations and systematic observations were done over 4 work days. Although tasks were extremely varied, certain movements at risk for epicondylitis were repeated many times. Fifty-three valves were turned against resistance as part of this job, and one valve requiring a particularly difficult movement was turned 20 times in one day. There were at least 61 operations at risk for epicondylitis per day over a 4-day period. Strain on the elbow joint was particularly intense for the woman worker because the design of the workplace gave an advantage to taller workers with larger hands. Although this case study does not permit us to conclude that the worker’s epicondylitis was due to her job, it enables us to suggest that it would be wise to adapt the dimensions of relevant equipment and worksites to a wider range of potential worker sizes. We also raise some questions about the definition of repetitive strain in epidemiological studies. We suggest that it may be necessary to consider not only the cycle time but also the total of forces exerted on a joint in order to study workplace injuries to the musculoskeletal system.     

Evaluation of Online Information Sources on Alien Species in Europe: The Need of Harmonization and Integration

Europe is severely affected by alien invasions, which impact biodiversity, ecosystem services, economy, and human health. A large number of national, regional, and global online databases provide information on the distribution, pathways of introduction, and impacts of alien species. The sufficiency and efficiency of the current online information systems to assist the European policy on alien species was investigated by a comparative analysis of occurrence data across 43 online databases. Large differences among databases were found which are partially explained by variations in their taxonomical, environmental, and geographical scopes but also by the variable efforts for continuous updates and by inconsistencies on the definition of “alien” or “invasive” species. No single database covered all European environments, countries, and taxonomic groups. In many European countries national databases do not exist, which greatly affects the quality of reported information. To be operational and useful to scientists, managers, and policy makers, online information systems need to be regularly updated through continuous monitoring on a country or regional level. We propose the creation of a network of online interoperable web services through which information in distributed resources can be accessed, aggregated and then used for reporting and further analysis at different geographical and political scales, as an efficient approach to increase the accessibility of information. Harmonization, standardization, conformity on international standards for nomenclature, and agreement on common definitions of alien and invasive species are among the necessary prerequisites.     

Risks, risk taking, and societal decisions

Risk assessment is an important tool to help evaluate the appropriate course for social decisions. But this methodology does not appear to have played a significant role in such decisions. Moreover, public decisions often appear to be at wide variance with what course risk assessment would counsel. In this paper risk is defined, the nature of risk taking is examined, and risk assessment issues in terms of societal decisions are identified. Eight such issues are listed as technical challenges for risk assessors to take into consideration if their analyses are to be more successful in influencing public policy. Finally, the paper suggests two operative guidelines to improve the effectiveness of risk assessment influence on social decisions. One is to recognize that risk assessment is only one input, albeit an important one, to such decisions. The other is to strive for simplicity without loss of completeness or exactness.