Wave hydrodynamics around a multi-functional artificial reef at Leirosa

This paper describes an application of the Boussinesq-type COULWAVE model to study the wave hydrodynamics in the vicinity of a multi-functional artificial reef (MFAR). This reef is under investigation and consists of a supplementary protection solution for the Leirosa sand dune system located at South of Figueira da Foz, on the Portuguese West coast. Such installation near the coastline is expected to contribute to enhance the surfing conditions in the area, protect the sand dune system in the surroundings of Leirosa beach, and increase its environmental value. Numerical calculations with the COULWAVE model were performed for four test cases, considering two reef geometries (differing in the reef angle) and two incident wave conditions (storm condition and a common wave condition). Comparisons between the results obtained, in terms of wave heights and breaking line positions allow us to assess the influence of the reef on the hydrodynamics near the beach and around the reef. Moreover, the reef performance was analysed in terms of surfability and coastal protection. The surfability parameters (breaker height, Iribarren number and peel angle) were calculated for each test case using the numerical wave heights, wave directions and wave breaking positions. Comparisons of parameters allow characterizing the most appropriate configuration of the reef to improve the surfing conditions in the study area. A methodology based on numerical free surface elevations and horizontal velocity components was developed to calculate wave directions, since this is not a direct output of the COULWAVE model. Concerning coastal protection, analyses of the mean currents around the reef were used together with observations of the velocity cells near the shoreline as an indication of the sediment transport.     

Application of Sensitivity and Flux Analyses for the Reduction of Model Predicting the Photooxidative Degradation of an Azo Dye in Aqueous Media

The prediction of the system behavior is of significant interest when evaluating appropriate technologies for wastewater treatment. The robust prediction could be achieved by empirical mathematical modeling techniques, but they do not include steps in degradation of organic pollutants. Mechanistic models (MM) include chemical/physical phenomena, but may also include numerous reactions resulting with the complicated kinetic expressions with large number of parameters. This modeling approach can be challenging for complex system such as advanced oxidation processes. With the goal to reduce the number of reactions involved in developed MM, keeping the high prediction power, sensitivity, and flux analyses was employed. The results showed that MM describing the degradation of organic dye in water matrix by photooxidation processes can be significantly simplified, by reducing the number of reactions included without affecting the predictive power. The calculated root mean square deviation values between data predicted by MM and reduced MM_R differ insignificantly (≤1.4 %).     

Nest-seeking rock ants (Temnothorax albipennis) trade off sediment packing density and structural integrity for ease of cavity excavation

We investigated excavation and nest site choice across sediment-filled cavities in the ant Temnothorax albipennis. Colonies were presented with sediment-filled cavities, covering a spectrum from ones that should be quick to excavate but will form a weak enclosing wall to those that should be slow to excavate but form a strong wall. Overall, colonies only showed a significant preference for cavities that were fastest to excavate over those that were slowest. The speed of decision making and moving appears paramount over the suitability of the sediment for forming an enclosing wall. The mechanism behind the choice is the differential between the rates at which alternatives are excavated and accumulate ants. The rates for a particular type of cavity were unaffected by the type with which it was paired. This suggests that there is no significant competition between sites during the decision-making process. Certain colonies were able consistently to discriminate across more closely matched alternatives. These colonies required a greater number of ants to be present and took longer before beginning to move. A race is run between alternatives to become habitable but the process may be tuned across colonies such that it may run for longer and an incorrect or split decision is less likely.     

A 2019 Outbreak Investigation of Hepatitis A Virus Infections in the United States Linked to Imported Fresh Blackberries

Globally, hepatitis A virus (HAV) is one of the most common agents of acute viral hepatitis and causes approximately 1.4 million cases and 90,000 deaths annually despite the existence of an effective vaccine. In 2019, federal, state, and local partners investigated a multi-state outbreak of HAV infections linked to fresh blackberries sourced from multiple suppliers in Michoacán, Mexico. A total of 20 individuals with outbreak-related HAV infection were reported in seven states, including 11 hospitalizations, and no deaths. The Food and Drug Administration (FDA), the Centers for Disease Control and Prevention (CDC), and Nebraska State and Douglas County Health Departments conducted a traceback investigation for fresh blackberries reportedly purchased by 16 ill persons. These individuals reported purchasing fresh blackberries from 11 points of service from September 16 through 29, 2019 and their clinical isolates assessed through next-generation sequencing and phylogenetic analysis were genetically similar. The traceback investigation did not reveal convergence on a common grower or packing house within Mexico, but all of the blackberries were harvested from growers in Michoacán, Mexico. FDA did not detect the pathogen after analyzing fresh blackberry samples from four distributors, one consumer, and from nine importers at the port of entry as a result of increased screening. Challenges included gaps in traceability practices and the inability to recover the pathogen from sample testing, which prohibited investigators from determining the source of the implicated blackberries. This multi-state outbreak illustrated the importance of food safety practices for fresh produce that may contribute to foodborne illness outbreaks.

     

Rain forest fragmentation and the proliferation of successional trees

The effects of habitat fragmentation on diverse tropical tree communities are poorly understood. Over a 20-year period we monitored the density of 52 tree species in nine predominantly successional genera (Annona, Bellucia, Cecropia, Croton, Goupia, Jacaranda, Miconia, Pourouma, Vismia) in fragmented and continuous Amazonian forests. We also evaluated the relative importance of soil, topographic, forest dynamic, and landscape variables in explaining the abundance and species composition of successional trees. Data were collected within 66 permanent 1-ha plots within a large (approximately 1000 km2) experimental landscape, with forest fragments ranging from 1 to 100 ha in area. Prior to forest fragmentation, successional trees were uncommon, typically comprising 2-3% of all trees (> or =10 cm diameter at breast height [1.3 m above the ground surface]) in each plot. Following fragmentation, the density and basal area of successional trees increased rapidly. By 13-17 years after fragmentation, successional trees had tripled in abundance in fragment and edge plots and constituted more than a quarter of all trees in some plots. Fragment age had strong, positive effects on the density and basal area of successional trees, with no indication of a plateau in these variables, suggesting that successional species could become even more abundant in fragments over time. Nonetheless, the 52 species differed greatly in their responses to fragmentation and forest edges. Some disturbance-favoring pioneers (e.g., Cecropia sciadophylla, Vismia guianensis, V. amazonica, V. bemerguii, Miconia cf. crassinervia) increased by >1000% in density on edge plots, whereas over a third (19 of 52) of all species remained constant or declined in numbers. Species responses to fragmentation were effectively predicted by their median growth rate in nearby intact forest, suggesting that faster-growing species have a strong advantage in forest fragments. An ordination analysis revealed three main gradients in successional-species composition across our study area. Species gradients were most strongly influenced by the standlevel rate of tree mortality on each plot and by the number of nearby forest edges. Species-composition also varied significantly among different cattle ranches, which differed in their surrounding matrices and disturbance histories. These same variables were also the best predictors of total successional-tree abundance and species richness. Successional-tree assemblages in fragment interior plots (>150 m from edge), which are subjected to fragment area effects but not edge effects, did not differ significantly from those in intact forest, indicating that area effects per se had little influence on successional trees. Soils and topography also had little discernable effect on these species. Collectively, our results indicate that successional-tree species proliferate rapidly in fragmented Amazonian forests, largely as a result of chronically elevated tree mortality near forest edges and possibly an increased seed rain from successional plants growing in nearby degraded habitats. The proliferation of fast-growing successional trees and correlated decline of old-growth trees will have important effects on species composition, forest dynamics, carbon storage, and nutrient cycling in fragmented forests.     

Identification and chemical characterization of industrial particulate matter sources in southwest Spain

A detailed physical and chemical characterization of coarse particulate matter (PM10) and fine particulate matter (PM2.5) in the city of Huelva (in Southwestern Spain) was carried out during 2001 and 2002. To identify the major emission sources with a significant influence on PM10 and PM2.5, a methodology was developed based on the combination of: (1) real-time measurements of levels of PM10, PM2.5, and very fine particulate matter (PM1); (2) chemical characterization and source apportionment analysis of PM10 and PM2.5; and (3) intensive measurements in field campaigns to characterize the emission plumes of several point sources. Annual means of 37, 19, and 16 microg/m3 were obtained for the study period for PM10, PM2.5, and PM1, respectively. High PM episodes, characterized by a very fine grain size distribution, are frequently detected in Huelva mainly in the winter as the result of the impact of the industrial emission plumes on the city. Chemical analysis showed that PM at Huelva is characterized by high PO4(3-) and As levels, as expected from the industrial activities. Source apportionment analyses identified a crustal source (36% of PM10 and 31% of PM2.5); a traffic-related source (33% of PM10 and 29% of PM2.5), and a marine aerosol contribution (only in PM10, 4%). In addition, two industrial emission sources were identified in PM10 and PM2.5: (1) a petrochemical source, 13% in PM10 and 8% in PM2.5; and (2) a mixed metallurgical-phosphate source, which accounts for 11-12% of PM10 and PM2.5. In PM2.5 a secondary source has been also identified, which contributed to 17% of the mass. A complete characterization of industrial emission plumes during their impact on the ground allowed for the identification of tracer species for specific point sources, such as petrochemical, metallurgic, and fertilizer and phosphate production industries.     

Photodegradation of Diquat and Paraquat in aqueous solutions by titanium dioxide: evolution of degradation reactions and characterisation of intermediates

The titanium dioxide assisted photodegradation of Diquat and Paraquat herbicides solutions has been the subject of the present investigation, considering its direct application in the treatment of contaminated waters and soils. To have a better understanding of the photodegradation process, different types of TiO2, commercial and 'home prepared' Ti(1-x)FexO2 (x = 0% and 4%), were used as catalysts, using an UV light as radiation source. The degradation reactions were followed by UV spectroscopy and the intermediates and reaction products were characterised by electrospray ionisation mass spectrometry (ESIMS) combined with collision-induced dissociation (CID) and tandem mass spectrometry (MS/MS). The present study shows that, for photocatalytic degradation of Diquat and Paraquat solutions, a basic pH can be determinant, as well as the type of catalyst. The type of catalyst can also strongly influence the degradation pattern of the herbicide. Regarding complete degradation, we were able to show that Diquat is more persistent than Paraquat. During the photocatalytic processes, several intermediate and reaction products are sequentially formed, to which structures are proposed.     

Tradescantia pallida cv. purpurea boom in the characterization of air pollution by accumulation of trace elements

Tradescantia pallida cv. purpurea, a plant species widely employed for ornamentation in Brazil, has been successfully used for monitoring the genotoxicity of various agents by the micronucleus assay. To amplify knowledge about its suitability as a bioindicator species, its capacity for accumulating trace elements from urban air pollution was evaluated. T. pallida was rooted using standardized soil, and the vases were distributed in two highly polluted sites of the urban area of S?o Paulo, Brazil (Cerqueira Cesar and Congonhas districts), and in one unpolluted control site situated approximately 50 km from downtown S?o Paulo (in Caucaia do Alto). Approximately six months after exposure to pollutants, adult leaves of this plant were collected monthly for 12 months. The leaves were washed with deionized water, dried, and ground for analyses. Characterization of element levels was carried out by neutron activation analysis. Powdered samples and standards were irradiated at the IEA-R1 nuclear reactor for short and long periods, and concentrations of As, Ba, Br, Ca, Ce, Cl, Cr, Co, Fe, K, La, Mn, Na, Rb, Sb, Sc, Sr, Th, and Zn were determined. Analysis of variance applied to the results indicated that samples from polluted sites present the highest concentrations of Ba, Ce, Cr, Co, Fe, La, Sb, and Sc (p < 0.05). Discriminant analysis revealed that it was possible to distinguish the two polluted areas with a precision of 97.5%, based on the amount of pollutant elements measured in the plants at each site. The results indicated the potential use of T. pallida as an accumulator plant for air pollution biomonitoring.